Install
Videos!

Drain Valve - N286039:Porter Cable 360 View

Watch The
Repair Video

Drain Valve N286039

Part Number: N286039

161 Reviews

Ships within 1 business day

Questions & Answers

Repair Instructions

*This part replaces obsolete part #: NB286039, A17038, A06891 and SS-2707.

Product Information

Specifications

Thread 18 TPI

Description:

When you use a compressor the air that is compressed inside the tank will condensate and leave water inside the tank.
If it is left in the tank too long it can start to rust out the inside of the tank.

The Drain Valve should be opened up and let the water drain out.
The water will build up if you have a tendency to leave air in your tank for a long period of time.
You should drain your tank after each time it is used to prevent this from happening.

Warning: California's Proposition 65

Frequently Purchased With

Foam Fltr
$10.99

Valve Plate Wi..
$14.72

Tube Seal
$4.99

Check Valve
$14.91

Air Filter Ret..
$3.99

Pressure Switc..
$41.60

Hose Clamp
$3.99

Compatibility

This part is compatible with the following machines:

Porter Cable

Delta

CP503 Type 0 Compressor
CP503 Type 1 Compressor

CP503 Type 2 Compressor
CP503 Type 3 Compressor

DeWALT

D55150 Type 1 Compressor
D55151 Type 1 Compressor
D55153 Type 1 Compressor
D55153 Type 2 Compressor

D55250 Type 1 Compressor
D55250 Type 2 Compressor
D55251 Type 1 Compressor

DeVilbiss

Expand the 150+ compatible machines

Products Compatibility

This item works with the following types of products:

• Compressor

Repair Guides

Watch the Repair Video for Drain Valve

Articles:

How to Replace the Drain Valve on an Air Compressor

Step-by-step instructions to quickly remove and replace the drain valve on an air compressor....

November 21, 2014

Questions & Answers for Drain Valve

Sort by

My drain plug has reversed threadsNow what do I do ?

Marvin for model number C2002 Type 7 asked on 2024-01-13

Hi Marvin, Thank you for your question. Based on the model number that you provided, the part number for the drain valve is N286039. There is a video listed with the drain valve on our website that will show you how to install it. We hope this helps!

Yes I somehow lost the complete pressure release screw valve for my Porter Cable Air Compressor. I just have a single screw that has holes in it on the end. I don't believe that is everything to the assembly as it leaks. Is there a washer or another screw that this goes in? It will screw into the body of the tank, but again it leaks. Its a 6 gal 150 PSI And 2.6SCFM @90 psi compressor. Please advise on part(s) needed and how to order. Someone borrowed it and it came back like this! Thanks!

Reid asked on 2023-03-28

Hello Reid, thank you for contacting us. In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you!

I need a drain valve for my compressor. The serial number is 2961459226. The one you are showing looks too big in diameter. Ours is a screw with a hole in it and a o ring. Can you help me find the correct part. Thank you

Matt for model number C2002 type 5 asked on 2023-02-19

Hello Matt, Thank you for your inquiry. According to the parts list we received from Porter Cable, part# N286039 is the only drain valve listed as compatible. We show the nut as approximately 5/8 of an inch in diameter, the threaded end as approximately 1/2 inch in diameter and the other end as 3/8 of an inch in diameter. If yours does not match those dimensions, we would recommend contacting the manufacturer directly as we do not have an alternate part number listed. We hope this helps.

Hello, My air compressor drain plug needs to be replaced. I was wondering if this one would fit. Thank you

Samuel for model number 919167340 asked on 2022-12-29

Hello Samuel, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number: N286039. We hope this helps, good luck with this repair!

What is the correct drain valve for my pancake compressor model? Is this the correct one for model number 919.153451?

Don for model number 919153451 asked on 2022-08-08

Hello Don, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number: N286039. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Will this fit DeVilbiss irf412-2

Robert for model number IRF412 Type 2 asked on 2022-04-25

Hello Robert, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number:N286039. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Does this valve fit my c2002 type 7

James for model number C2002 type 7 asked on 2024-01-07

Hello James, Thank you for your inquiry. We confirm that this part will fit your model. We hope this helps with your repair.

I need a replacement drain valve for my craftsman air compressor. The oem part # is AC-0430

John for model number 919167780 asked on 2023-10-22

Hello John, Thank you for your inquiry. Checking the model number you have provided, we show the current compatible drain valve as part# N286039. We hope this helps.

I have a pancake compressor that needs a new drain valve. It leaks. Is this the right one?

Donald for model number 919.153451 asked on 2022-07-02

Hello Donald, thank you for your question. Yes, the Valve N286039 you had chosen is compatible with your model. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.

Does this drain plug fit my compressor?

Gordon for model number C2002 type 5 asked on 2022-04-04

Hello Gordon, Thank you for your inquiry. We have researched the model and type you have provided and confirm that this part is listed as compatible. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Repair Instructions: Submitted by Customers Like You

24 of 28 people found this instruction helpful

Tool Type:

Compressor

Parts Used:

Drain Valve - N286039

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Adjustable Wrench, penetrating oil

The original drain valve would not function properly (valve threads stripped)

I used penetrating oil to release the original equipment drain valve from the compressor tank, as it had rusted. I sprayed several applications of the oil onto the stem threads of the compressor and allowed 10-15 minutes between treatments. I didn't want to risk damaging the threads of the stem.

It was then easy to remove the defective drain valve. I applied teflon tape to the threads of the new valve, in order to facilitate removal in the future.

The replacement valve is working good again.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

8 of 8 people found this instruction helpful

Tool Type:

Compressor

Parts Used:

Drain Valve - N286039

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

Adjustable Wrench

Drain valve broke

The old drain valve had rusted badly and I broke off the handle. With a little persuasion I used a wrench to remove the old valve. I cleaned up the threads in the tank with a small wire brush. I applied a little Teflon tape to the new valve and threaded it in place. Works great now.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

8 of 9 people found this instruction helpful

Tool Type:

Compressor

Parts Used:

Drain Valve - N286039

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Wrench Set

Drain valve would't shut off

Unscrewed old valve & screwed new valve in. It fit perfect & held pressure fine.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

6 of 7 people found this instruction helpful

Tool Type:

Compressor

Parts Used:

Drain Valve - N286039

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Wrench Set

Drain valve worn

Removed the worn drain valve with a wrench. Then installed the new one.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

5 of 6 people found this instruction helpful

Tool Type:

Paint Sprayer

Parts Used:

Drain Valve - N286039

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Wrench Set

Compressor air tank was leaking through the drain valve.

Removed the old valve and replaced it with the new one.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

5 of 6 people found this instruction helpful

Tool Type:

Compressor

Parts Used:

Drain Valve - N286039

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Adjustable Wrench

Someone stripped the drain valve in a Porter Cable compressor

eReplacemntParts furnished the correct part in a very timely fashion and with only and adjustable wrench and some teflon tape I had the compressor up and running in minutes

Did you find this story helpful?

Thanks for voting and helping fellow customers!

6 of 9 people found this instruction helpful

Tool Type:

Compressor

Parts Used:

Drain Valve - N286039

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Wrench Set

Leaking drain valve

Replaced the old valve with the new one.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

4 of 5 people found this instruction helpful

Tool Type:

Compressor

Parts Used:

Drain Valve - N286039

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

, Single box wrench

Very long time ago the butterfly ends of the original drain bent and I could no longer drain the tank after use

- Turn compressor off
- Unplug tank
- Release air pressure from tank using pressure overflow release valve
- Put tank on end
- Remove existing plug
- Return tank to normal position and let water drain for several minutes - moving tank up/back to get any pooling water out
- Install new drain valve using box wrench
- Plug compressor in
- Turn on and let it come up to pressure (to test)
- Turn off, unplug, release pressure down to 20PSI, open drain plug (helps push water out)
- Done

Did you find this story helpful?

Thanks for voting and helping fellow customers!

4 of 5 people found this instruction helpful

Tool Type:

Compressor

Parts Used:

Drain Valve - N286039

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Wrench Set

Leaking valve.

Used a socket wrench to remove the old valve, and to install the new valve.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

4 of 5 people found this instruction helpful

Tool Type:

Compressor

Parts Used:

Drain Valve - N286039

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Wrench Set

Old drain plug leaking

Very easy to do, use a wrench to remove the old one, and a wrench to replace it with the new drain valve.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

161 Reviews

Click to filter by ratings:

5 stars

149

4 stars

3 stars

2 stars

1 stars

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

Perfect fit, easy fix.

Air compressor is as good as new. Part was just what was needed.

Jeffrey - 27 days ago Verified Purchase

Excellent service

Always rely on eReplacementParts, great selection of parts, easy to locate on site and delivery is spot on. Ordered a replacement drain valve for a 20 year old Stanley compressor, part arrived in new condition, perfect fit. Problem solved !

Guest - December 30, 2023 Verified Purchase

This was as easy as unscrewing the old part and screwing in the replaement.

My compressor (which sat for three years, and two wrong replacement parts) is working like a charm now, thanks to knowledge of the associate at eReplaement parts. She was soooo good, pleasant, knew and appeared to love her job and did not act as if I was being a bother.

Guest - October 8, 2023 Verified Purchase

Everything went great

The website was easy to use and I found the part I needed right away.

Guest - September 23, 2023 Verified Purchase

Perfect fit, well made.

The replacement part fit perfectly and was actually better made than the original part.

Guest - September 19, 2023 Verified Purchase

Easy repair, part works great , right part

The part shipped quickly recived in great condition ordering was easy

Ronald - August 19, 2023 Verified Purchase

Repair parts

Website was easy to use, parts were exact replacements, no modifications needed.

Guest - August 2, 2023 Verified Purchase

drain oh

considering how old my air compressor is the drain valve came in fast and perfect. G

Guest - July 24, 2023 Verified Purchase

All parts fit great

This was one of a few parts I bought for my Craftsman compressor, all parts fit well and are of good quality.

Guest - June 27, 2023 Verified Purchase

All perfect.

The tools in life back

Guest - June 27, 2023 Verified Purchase

Verified Purchase

eReplacementParts Team

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

Product Information

Repair Guides

Watch the Repair Video for Drain Valve

Articles:

How to Replace the Drain Valve on an Air Compressor

Step-by-step instructions to quickly remove and replace the drain valve on an air compressor....

November 21, 2014