*This part replaces obsolete part #: BNT3915.
Product Information
Frequently Purchased With
Compatibility
This part is compatible with the following machines:
the 11 compatible machines
Products Compatibility
This item works with the following types of products:
- • Reel
Questions & Answers for Drag Washer
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Reel
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Wrench Set, Nutdriver, Brand specific grease and oil for Shimano reels.
Fishing reel drag did not tighten, low drag strenght.
I disassembled the reel and laid each piece out in the order they came off the reel. The work was done over a large towel laid on the work surface to prevent a dropped part from bouncing off the table to the floor. Each part and the reel case was cleaned with cotton swabs and rubbing alcohol and oiled with Shimano brand oil and drag grease. The reel was re-assembled in the correct order and part orientation. Some parts could be placed back in the reel in the wrong orientation(upside down) so be sure to note this when you pull them out of the reel.
It is very helpful to have a schematic of your reel at hand for reference when you put the reel back together.
The reel now works as it did new.
It is very helpful to have a schematic of your reel at hand for reference when you put the reel back together.
The reel now works as it did new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Reel
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Nutdriver
Bearings rusted and frozen
Open the side of reel and cleaned. Removed damaged parts and replaced with new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information