*This part replaces obsolete part #: BOV800XL/133 and BOV800XL133.
Product Information
Description:
This genuine manufacturer-supplied part is specially designed for use with Breville smart ovens. It is an identical replacement for a missing or a faulty door assembly that was installed on a new unit. The door helps to maintain the internal temperature, please make sure to refer to the appropriate diagram of your model for the correct location and application of this component. Keep in mind this high-quality assembly is made of durable metal with a glass window and is sold individually. |
Compatibility
Products Compatibility
This item works with the following types of products:
- • Oven
Questions & Answers for Door Assembly
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
5 of 5 people found this instruction helpful
Tool Type:
Convection Oven
Parts Used:
Repair Difficulty:
Hard
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Power Drill
The Handle on the Door Broke
1. Removed screws from back,
2. Removed screws from feet.
3. Able to mostly lift up the "hood"
4. Reached under and disconnected the spring
5. Reached under and unconnected the part of the door that held the spring from the other part to remove door from left side.
6. Able to then remove door from right side.
7. Put new door in place.
8. Put all screws back in, except two of the "feet" screws because it was difficult to get those in place and it stays together fine without those screws.
This job requires two people. One to hold open the "hood" of the oven as much as possible while the other person undoes the spring.
It requires a lot of patience and you remove a lot of screws to get to the spring holding the left side of the door in place.
2. Removed screws from feet.
3. Able to mostly lift up the "hood"
4. Reached under and disconnected the spring
5. Reached under and unconnected the part of the door that held the spring from the other part to remove door from left side.
6. Able to then remove door from right side.
7. Put new door in place.
8. Put all screws back in, except two of the "feet" screws because it was difficult to get those in place and it stays together fine without those screws.
This job requires two people. One to hold open the "hood" of the oven as much as possible while the other person undoes the spring.
It requires a lot of patience and you remove a lot of screws to get to the spring holding the left side of the door in place.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information