*This part replaces obsolete part #: FC312043000 and FC012043000.
Product Information
Description:
This is an original Rolair replacement part manufactured for use with air compressor pumps. The dipstick is used to measure the level of oil in the crankcase, and seal the oil inlet. This dipstick is sold as an individual replacement part. |
Products Compatibility
This item works with the following types of products:
- • Compressor
- • Pump
Questions & Answers for Dipstick
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
1 of 2 people found this instruction helpful
Tool Type:
Compressor
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Wrench Set
Missing the dip stick. And unsure how good the valves were.
Put the dip stick in the oil tank, Done.
Wrenched off old drain valve. Put Teflon tape on new one and threaded on. Tightened with a wrench.
Wrenched off old drain valve. Put Teflon tape on new one and threaded on. Tightened with a wrench.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information