Decal

Have a 1996 Toro Lawnmower, since the lawnmower was in storage for about 4 years,it needed a good clean up, tune up, and some cosmetic fixes. Body is in good condition, along with the Briggs and Stratton engine.

1. Replaced the split, fauly gas cap with the new one I bought from here at eReplacementParts.com.

2. Changed out the spark plug. Still had the original spark plug from 1996.

3. Changed out the green foam Filter element - this also was the original part from 1996.

4. Put on the new Toro logo that was missing off the front of the engine.

The lawnmower looks amazing now, started up on the 3rd pull and runs like a champ.

1. Removed old bolt and wheel height adjustment assembly on both front wheels.(Replaced both front wheel bolts to prevent other front wheel from failing due to same part failing.)
2.Cleaned all parts that would need to be greased. This would include bolts for height adjustment assembly as well as bolts to mount wheels to adjustment assembly, and inside of wheel where bolt goes into wheel. This includes removing and cleaning bushing inside center of wheel.
3. Put coating of grease on all parts that meet for height adjustment and inside wheel center hole and bolts for wheel mounting.
4.Bolted wheels to height adjustment assembly and bolted height adjustment assembly to mower base.