eReplacementParts.com
866-322-9842
Ridgid Parts
Repair Parts Home  Power Tool Parts  Ridgid Parts  079027013040 Cylinder

Cylinder

Part Number: 079027013040
Availability: 17 in stock
Price: $11.35
Quantity:
Order within the next 14 hours
and your part ships today!
Product Information
Manufacturer: Ridgid
Product Number: 079027013040
Classification: Part
Weight: 0.04 lbs.
Shipping: Ships Worldwide
Description:
This is an original replacement part which is specially made for use with Ridgid air compressors. The cylinder is a hollow, round chamber with smooth walls that houses the piston. Over time it may wear out causing air leaks and eventually require a replacement to ensure your compressor performs as it should. Check the diagrams of your model for the correct installation of the new part. You will need a screwdriver and a wrench set to take apart the pump when replacing this cylinder. Note, it is made of a durable metal and is sold as an individual item.
Compatibility

This part is compatible with the following machines:


Products Compatibility

This item works with the following types of products:

  • • Compressor
Questions & Answers

Can you tell me what the ID and OD of this part is and also the OD of the flange is. I'm looking for a sleave that has a ID of 2.250 and a length of at least 1.860" thanks
Jay jacobsen
Hello Jay, thank you for your inquiry! Specification information for the referenced part is not available in our database. We strongly recommend you contact the manufacturer, as they may have this information in their system. Simply reference the part number you provided to us and they may be able to provide you with these details. Thank you.
Repair Instructions: Submitted by Customers Like You
2 of 2 people found this instruction helpful
Tool Type:
Compressor
Parts Used:
Piston Rod Assembly - 079027013702
Cylinder - 079027013040
Cylinder Gasket - 079027013041
Valve Plate Assembly - 079027013703
Cylinder Gasket - 079027013054
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set, Adjustable Wrench, Hex wrench.
Reed valve broke on exhaust side
1. Watched the video.
2. Removed broken parts per instructions
3. Installed the new parts.
4. Way easier than I thought it would be, great video. Everything you needed to do was shown very clearly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Compressor
Parts Used:
Check Valve Assembly - 079027013734
Cylinder - 079027013040
Cylinder Gasket - 079027013041
Cylinder Gasket - 079027013054
Piston Ring - 079027013037
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Wrench Set, Allen socket 3/8 drive
The check valve internal seal broke apart,causing air pressure to act like it was filling tanks in about 10 seconds then shutting off compressor,but in reality the air pressure was pushing back agains
1. Remove tube that connects head to check valve, also remove tube from regulator to check valve, remove check valve from tank to inspect internal parts of valve, test condition of valve by blowing into large port of valve while pushing and releasing stem. If working good, problem may be in area of motor field or capacitors.
2. Installed new check valve and needed to slightly bend both tubes for alignment for threading of tube nuts, takes just a little finesse.
3. After removing dust cover, unscrew Allen head bolts which may seem frozen due to thread locker sealant from factory, pull cylinder, remove Allen screw on top of piston
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Compressor
Parts Used:
Piston Rod Assembly - 079027013702
Cylinder - 079027013040
Cylinder Gasket - 079027013041
Cylinder Gasket - 079027013054
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Socket set, Wrench Set
Would not pump air
Remove the pump motor housing. Remove the screw from the fan. Remove the head from the compressor pump. Remove the piston rod assembly from the counterbalance. Pull out the worn piston assembly and cylinder. Clean the pump. Put a little oil in the cylinder and insert the piston. Press both parts into the pump. Connect the piston rod to the counterbalance. Reconnect the fan. Remove the old gaskets and carefully clean the surface they sit on. And install them. Replace the pump head. Reattach the pump housing.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information
Manufacturer: Ridgid
Product Number: 079027013040
Classification: Part
Weight: 0.04 lbs.
Shipping: Ships Worldwide
eReplacementParts.com
7036 South High Tech Dr.
Midvale, UT 84047
visa mastercard discover american express PayPal

fancyboxy