*This part replaces obsolete part #: 62100-12120.
Product Information
Description:
This part is an OEM sourced directly from the manufacturer for use in edgers and trimmers made by Shindaiwa and Echo. The cylinder gasket attaches to the cylinder. An allen wrench might be needed during the installation process. It may become broken and will need to be replaced. This item is made of a thin material and is sold individually. |
Frequently Purchased With
Compatibility
the 18 compatible machines
This part is compatible with the following machines:
Shindaiwa
AH242 Hedge Trimmer
AH242 Hedge Trimmer
AHS242 Articulated Hedge Trimmer
AHS242 Articulated Hedge Trimmer
C242 Brushcutter
81742 Multipurpose Tool Carrier
F222 EPA2 Trimmer
F222 EVC Trimmer
T222 Trimmer
AH242 Hedge Trimmer
AHS242 Articulated Hedge Trimmer
AHS242 Articulated Hedge Trimmer
C242 Brushcutter
81742 Multipurpose Tool Carrier
F222 EPA2 Trimmer
F222 EVC Trimmer
T222 Trimmer
T242 EPA2 Trimmer
T242 EVC Trimmer
T242X EPA2 Trimmer
M242 (70100001 & UP) Multipurpose Tool Carrier
T242 Trimmer
F222 Grass Trimmers (F)
T242X Grass Trimmers (T)
M242 Multi-Tool System
T242 EVC Trimmer
T242X EPA2 Trimmer
M242 (70100001 & UP) Multipurpose Tool Carrier
T242 Trimmer
F222 Grass Trimmers (F)
T242X Grass Trimmers (T)
M242 Multi-Tool System
Echo
Products Compatibility
This item works with the following types of products:
- • Edger
- • Hedge Trimmer
- • Trimmer
Repair Guides
Articles:
Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225 trimmer....
May 27, 2015
|
Questions & Answers for Cylinder Gasket
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Trimmer
Repair Difficulty:
Easy
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Socket set, Nutdriver
Low compression, had no power.
Hello, had to take the Engine cover off, took muffler cover off, took air filter off, Remove carburetor, insulator, took screws out of the head, Remove the head Gasket, clean the piston up removed old piston rings, put new piston rings on oiled Piston, piston cylinder. Put it all back together. Runs perfect, got power like it did when it was new. By the way, first time I have ever did that before. Job was so simple. PS if I ever have to do it again I will replace piston and put a new Cylinder head on, with new piston rings. Don’t think I will have to ever do that. But it’s a simple job, that Weed eater was $300.30 dollars. So rebuilding lot cheaper then buying a new one. Good luck with your fix. God Bless Mike
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information
Repair Guides
Articles:
Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225 trimmer....
May 27, 2015
|