Product Information
Specifications
|
Description:
This is genuine Worx replacement part.The cover protects the trimmer spool during use. The cover works together with the spool line assembly to allow line to feed out while trimming. This allows continuous trimming without having to stop often and replace broken string lines. With normal wear and tear, these covers can become worn, broken, or cracked. To remove the old cover, press in the tabs and the cover should pull right out. |
Frequently Purchased With
Products Compatibility
This item works with the following types of products:
- • Trimmer
Questions & Answers for Cutting Head Cover
How do I order a string trimmer cap cover for a W163?
Yvonne
for model number W163
asked on 2023-04-26
Hello Yvonne, Thank you for the question. The Cutting Head Cover for this model is Part Number: 50006531. Good luck with the repair!
eReplacementParts Team April 26, 2023
My trimer/edger is WG167. But can't find it. Will WG166 work?
Jim
for model number WG167
asked on 2023-03-22
Hello Jim, Thank you for your inquiry. Researching the model number WG167 that you have provided, we show the compatible cutting head cover as part# 50006531. We hope this helps you.
eReplacementParts Team March 22, 2023
2 and a quarter inch, not 2 and a halfConsult previous question I sent in.
James
for model number 201313020095
asked on 2022-10-26
Hello James, Thank you for your inquiry. We have researched the model you have provided and have found the part you are looking for is 50006531 and that it snaps into the cutting head housing. We hope this helps and if you need help placing an order for a part, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
eReplacementParts Team October 26, 2022
2and a half WG175 Do you have a head cover to fit this?Will I also need the screw for this?
James
for model number 201313020095
asked on 2022-10-26
Hello James, Thank you for your inquiry. We have researched the model you have provided and have found the part you are looking for is 50006531 and that it snaps into the cutting head housing. We hope this helps and if you need help placing an order for a part, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
eReplacementParts Team October 26, 2022
Will this part fit WG154
Archie
for model number 20200300098144
asked on 2022-10-08
Hi Archie,
Thank you for your question. Yes, this would be the correct cover for your trimmer. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
eReplacementParts Team October 08, 2022
Just ordered the spool covers and I want to be sure these will fit my trimmer
Patricia
for model number WG 170.9
asked on 2022-10-07
Hi Patricia,
Thank you for your question. Yes, this would be the correct cover for your trimmer. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
eReplacementParts Team October 07, 2022
This cover works on the WG170
Steve
for model number WG166
asked on 2022-09-30
Hello Steve, thank you for your question. Yes, this Cutting Head Cover works on the WG170. We hope this helps.
eReplacementParts Team September 30, 2022
I'm not sure exactly where to find the model number on the weed eater to try to find the correct weed eater to try to find the correct part that I'm looking for can you help
Ruth
asked on 2022-09-07
Hello Ruth, Thank you for writing. The Model number label can often be found on the side of the motor casing or on the Bottom of the Casing. We hope this helps!
eReplacementParts Team September 07, 2022
Will this cap fit wg180 trimmer
Ken
for model number wg180
asked on 2022-09-07
Hello Ken, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number: 50006531. Thank you for your inquiry, good luck with this repair!
eReplacementParts Team September 07, 2022
Will this cover fit a wg116 trimmer
Manny
for model number WG116
asked on 2022-07-20
Hello Manny, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number:50019417. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
eReplacementParts Team July 20, 2022
Repair Instructions: Submitted by Customers Like You
53 of 67 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, finger and thumb
Retainer cap broke
All that needs to be done, is to push the new one on !!!!!!!!!!!!!!!!!!!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
16 of 21 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, tools not required
Cutting head cover had to be replaced due to wear and tear.
Part was easy to replace. Hardest thing was finding the place to buy the part that was needed. Part simply snaps in the place and is secured by two tabs.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
18 of 26 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, none
Broken cover over the string reel
The cover snaps into slots on the head. I have used it once since with no problems.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
14 of 19 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Cutting head cover wore out
Press the side tabs to remove it, line up the tabs and press it in.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
11 of 14 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Spool cover was worn out.
Spool cover worn out. 10-second repair. Snap off the old, snap on the new. Perfect fit.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
6 of 9 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, no tools required
Worx battery trimmer string trimmer cover wore out
I just needed to push the new cover on
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
cutting head cover , old and brittle
Popped the new cover and tra la ready to trim!!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
4 of 7 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, none
Trimmer spool cap disintegrated over time, so had to be replaced. The rest of the WORX trimmer works ok still.
Snap on a new one. Make sure the spool is facing up and you rotate it til it clicks and then the cap will snap on.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Old head cover was worn out and disintegrated
New part snapped right on. Perfect fit
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Hand and fingers
The old cutting head cover broke.
1. Removed the broken cover.
2. Snapped the new cover on.
2. Snapped the new cover on.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
show more
Reviews
119 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
109
4 stars
5
3 stars
3
2 stars
2
1 stars
0
< PREV
- 1
- 2
- 3
Exactly as pictured
Great service as always.
Guest -
March 13, 2024
Verified Purchase
Perfect fit
As usual a very satisfied customer. Thanks
Guest -
September 27, 2023
Verified Purchase
Easy repair
Fit perfectly.
Guest -
September 16, 2023
Verified Purchase
Perfect fit
I was concerned if the Turing head cover ordered was the correct size. It's a perfect fit and trimmer is back in operation. Thanks.
Guest -
September 5, 2023
Verified Purchase
Perfect fit - works great!
The spool cap was the correct size and is a perfect fit. My order arrived quickly and works like a charm. Their return process is very simple and efficient.
Guest -
August 16, 2023
Verified Purchase
Worx cap
Brand new part fit perfectly. My WORX trimmer is back in action 👍
Guest -
August 3, 2023
Verified Purchase
Right part for an old machine.
I was skeptical about getting the right part, but this company came through..
Guest -
July 19, 2023
Verified Purchase
Cover worked like the original.
Cover worked like the original. I had ordered some covers from a different company, they would not stay on. The ones from e replacement are great.
Guest -
October 25, 2022
Verified Purchase
Right size
Took over 2 weeks to get. Cost almost $14 for a $4 part because of shipping price. Should have shipped for free. I messaged them and NO ONE ever responded. I call that poor customer service.
Nancy -
October 17, 2022
Verified Purchase
Exactly what I needed, very pleased with my purchase.
At First I thought I might have a problem in finding the part I required being as my strimmer was very old and I have had it for quite a few years. However I am so glad that Replacement parts had what I was looking for. Delivery was fast and it was not long before I was back at work.
Guest -
September 28, 2022
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
- 2
- 3
Product Information