866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Lawn Equipment Parts  Toro Parts  594195 Crankcase Gasket With Bolts

Crankcase Gasket With Bolts

Part Number: 594195
Briggs and StrattonToro
Availability: 25+ in stock
Price: $30.32
Quantity:
Ships within 1 business day

*This part replaces obsolete part #: 591911, 697227, 690945 and 273488.

Description:
This genuine crankcase gasket is used on small lawn and garden engines. Its purpose is to make an air tight seal so that no air/oil leakage occurs. Over time this gasket will deteriorate and will need to be replaced. It is made out of composite material and it is sold individually. To complete this repair you will need a wrench. Includes one (1) gasket and ten (10) bolts. This will need to be tightened with torque to 300 inch pounds.
Product Information
Manufacturer: Briggs and Stratton, Toro
Product Number: 594195
Classification: Part
Weight: 0.59 lbs.
Shipping: Ships Worldwide
Related Products
Compatibility

This part is compatible with the following machines:

Toro
Briggs and Stratton

Products Compatibility

This item works with the following types of products:

  • • Engine
  • • Lawn Tractor
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
12 of 12 people found this instruction helpful
Tool Type:
Lawn Tractor
Parts Used:
Crankcase Gasket With Bolts - 594195
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Socket set, Wrench Set, Nutdriver
Blown sump pan gasket on B/S twin v 27 hp.
1 Removed motor from chassis.
2. Cleaned the motor with degreaser and sprayed it clean.
3. Removed the sump pan and cleaned old gasket material away
4. Used a gasket sealer to hold new gasket on the motor base
5. Removed the oil pump cover and pump
6. Carefully placed sump pan onto the motor carefully working oil seal on crankshaft
7. Followed the instructions on insert about how to bolt down the sump pan
8. Inserted oil pump drive shaft and oil pump and cover
9. Reinstalled motor and put in oil
10. Tested the motor by cranking and running it WORKED PERFECT.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
8 of 8 people found this instruction helpful
Tool Type:
Lawn Tractor
Parts Used:
Oil Seal - 795387
Seal-O Ring - 690589
Crankcase Gasket With Bolts - 594195
V-Belt - 532140218
Repair Difficulty:
Medium
Time Spent Repairing:
More than 2 hours
Tools Used:
Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver, Impact wrench to remove electric clutch.
Oil Leak
Removed Engine, removed oil pump, removed oil pan, spent a great deal of time removing the old gasket taking care to prevent pieces from entering the engine. Removed seal, reinstalled new seal, reinstalled new gasket, replaced oil pan, replaced oil pump and o-ring, reinstalled engine, installed new drive belt, started and checked for leaks and proper operating. Everything fit perfectly and now with a new dry drive belt the mower is once again moving forward and backward at the desired speed without the essence of burning belt and oil.

A note of caution, when reinstalling the oil pan over the non chamfered crankshaft the seal is very easily damaged. It requires assistance in the form of carefully manipulating the seal over the crankshaft. I used a jewelers hex screwdriver but any small blunt object to guide the seal without cutting would suffice. Also scribing a reference mark on the the governor arm and shaft ensures it goes back on in the proper position. If you forget to do this you must reference technical data for proper installation to prevent engine overspeed damage. Simple procedure but too long to write in space provided.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
6 of 8 people found this instruction helpful
Tool Type:
Lawn Tractor
Parts Used:
Oil Seal - 795387
Crankcase Gasket With Bolts - 594195
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Socket set, Wrench Set, Nutdriver, Impact driver, torque wrench,scraper for gasket removal
Crankcase gasket was leaking
Removed engine from riding mower, turned it upside down, don't set it on fan, pushes crankshaft up enough it holds crankcase cover up so it won't seat, removed crankcase cover, cleaned and replaced gasket, replaced and torqued bolts, then reinstalled and filled with oil. Replaced PTO shaft seal while I was there. No leaks!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 3 people found this instruction helpful
Tool Type:
Lawn Tractor
Parts Used:
Oil Seal - 795387
Crankcase Gasket With Bolts - 594195
Gear-Governor - 793338
Stk Pulley - 690441MA
Washer - 799772
Repair Difficulty:
Medium
Time Spent Repairing:
More than 2 hours
Tools Used:
Socket set
Governor broken
1. Removed engine from chassis
2. Removed oil pan (base of engine)
3. Cleaned out old parts from governor using magnet to get very small slivers
4. Scraped off old gasket (tough)
5. Installed new governor/new washer and cup
6. Installed new gasket
7. Replaced oil pan
8. Reinstalled engine onto chassis
9. Tested

Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Lawn Tractor
Parts Used:
Rocker Cover Gasket - 690971
Oil Seal - 795387
Crankcase Gasket With Bolts - 594195
Camshaft - 790562
Link-Throttle (Used With Plastic Intake Manifold) - 695238
Kit-Carburetor Overhaul - 797890
Intake Gasket - 690949
Oil Filter - 696854
Repair Difficulty:
Medium
Time Spent Repairing:
More than 2 hours
Tools Used:
Screwdriver, Pliers, Socket set, Wrench Set, Adjustable Wrench
Briggs V-Twin running on 1 cylinder, will not turn over due to high compression.
Check rocker arm movement to determine cam condition.
Replace worn out cam (one lobe gone).
Good time to change the seal at this time too.
Carefully adjust the valves "by the book".
Check / clean carburetor very carefully. The idle jets are very small and clogs aren't easily seen.
(took 2 attempts)
Turns over freely now and runs like a top.

Thanks !
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Engine
Parts Used:
Oil Seal - 795387
Fuel Filter - 845125
Crankcase Gasket With Bolts - 594195
Oil Filter - 696854
Repair Difficulty:
Medium
Time Spent Repairing:
More than 2 hours
Tools Used:
Screwdriver, Pliers, Power Drill, Socket set, Wrench Set, Hoist to lift motor
Blown oil sump seal on 27 hp Briggs and straton motor
Removed motor from mower. Drained oil. Disassembled and removed oil sump pan. Replaced crank seal cleaned surfaces. Installed new gasket on oil sump pan. Reassembled and torqued new bolts to correct spec. Reassembled mower. Added oil and new filters. Started engine. Reassembled mower deck and belts after confirming no leaks. Total time on this project from start to finish approximately 5 hours performed with all the correct tools and mechanical knowledge.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Engine
Parts Used:
Crankcase Gasket With Bolts - 594195
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Socket set, Wrench Set
wore out parts, Lower oil seal blue out
Removed engine from frame the replaced the oil seal.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Tractor
Parts Used:
Oil Seal - 795387
Seal-O Ring - 690589
Crankcase Gasket With Bolts - 594195
Repair Difficulty:
Hard
Time Spent Repairing:
More than 2 hours
Tools Used:
Socket set, Wrench Set, Adjustable Wrench
leaking crankcase gasket
removed engine from the lawn tractor. then turn it upside down to remove the crankcase to make the repairs.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Tractor
Parts Used:
Oil Seal - 795387
Crankcase Gasket With Bolts - 594195
Repair Difficulty:
Hard
Time Spent Repairing:
More than 2 hours
Tools Used:
Screwdriver, Socket set, Wrench Set, Nutdriver, pipe wrench
Blown out sump gasket
Repair was more physical than mental. Drained engine oil, then removed engine from tractor and flip it upside down to remove sump. Scrap off old gasket. Used kerosene to clean sump and parts I removed. Sopped up rest of oil left in the crankcase. Popped seal out and replace with new one. Took oil pump apart and cleaned. Inspected O-ring for damage. Was ok, so reused it. Put new gasket on and then the sump pan. Careful not to fold the crankcase seal. Used the new bolts that came with the gasket kit and torqued to specs. ( 300 inch lbs. or 25 ft. lbs. ) Put on new oil filter and filled with oil. Put engine back in tractor and reconnected all electrical cables, gas line, throttle, and choke cables. Set governor. Started and inspected for leaks. Job is not technically hard. Lots of videos online that will show you step by step how to do it. The hard part is just physically crawling around, and under the mower, lifting a heavy V-twin engine out of the tractor, then repeating the process to put it back in. I took my time since I had some before the parts arrived.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Tractor
Parts Used:
Oil Seal - 795387
Crankcase Gasket With Bolts - 594195
Repair Difficulty:
Hard
Time Spent Repairing:
More than 2 hours
Tools Used:
Screwdriver, Socket set, Wrench Set, Torque wrench
Oil sump gasket failed blowing fine oil mist out collecting on cylinder body.
1 Removed engine from lawn tractor.
2 On workbench, removed oil pump cover & pump. Split oil sump from engine.
3 Cleaned off old gasket & removed shaft oil seal. Discarded 10 old mounting bolts.
4 Installed new gasket & oil seal.
5 Mounted sump back on engine using 10 new bolts provided with gasket kit.
6 Used torque wrench to tighten bolts per instructional sheet.
7 Reinstalled oil pump & cover. Suggestion: Purchase new o-ring also when ordering parts.
8 Changed oil filter & added oil at this time
looking for initial leaks.
9 Reassembled engine back on mower. Note: Verify governor setting.
10 Started at low speed, ran engine to operating temperature then full throttle to assure no leaks.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Crankcase Gasket With Bolts - ( 594195 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
Question: Briggs 594195

fges

What is included in this kit
WJA
Hello fges,

The part number 594195 Crankcase Gasket. Includes the gasket and ten new cylinder head bolts with a thread locking agent on them and set of instructions.

-WJA
visa mastercard discover american express PayPal
HACKER SAFE certified sites prevent over 99.9% of hacker crime.

fancyboxy