Coupling 027097
Part Number: 027097
Order within the next 11 hours
and your part ships today!
and your part ships today!
Product Information
Description:
| This genuine OEM replacement part is designed for use with Waring blenders. The coupling is the part of a blender that transfers power from the blender's motor to the blade assembly. Over time, the teeth on blender coupling wear down until they will no longer engage the blade assembly. This coupling is made out of plastic and it is sold individually. |
Compatibility
This part is compatible with the following machines:
the 25 compatible machines
Products Compatibility
This item works with the following types of products:
- • Blender
Questions & Answers for Coupling
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Blender
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
The coupling on the base and pitcher were ground down
1) simply replace the blending assembly for the pitcher. Might as well replace the jar seal at the same time
2) Turn base over and unscrew the three screws that attach the cover. Remove cover.
3) Insert a small screwdriver and lock the motor fan by jamming the blades. There are holes in the motor chassis that will accept the tip of the screwdriver to give you some leverage. Unscrew the impeller by turning in the direction of motor rotation. I used pliers to grip the impeller. Once started, it unscrewed by hand.
4) Screw on the new impeller (coupling)
5) The rubber feet are a press fit. Mine were old and cracked, so I replaced them as well
2) Turn base over and unscrew the three screws that attach the cover. Remove cover.
3) Insert a small screwdriver and lock the motor fan by jamming the blades. There are holes in the motor chassis that will accept the tip of the screwdriver to give you some leverage. Unscrew the impeller by turning in the direction of motor rotation. I used pliers to grip the impeller. Once started, it unscrewed by hand.
4) Screw on the new impeller (coupling)
5) The rubber feet are a press fit. Mine were old and cracked, so I replaced them as well
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 2 people found this instruction helpful
Tool Type:
Blender
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Pliers
Coupling was worn and needed replaced, jar bottom was cracked and could not be used.
Unscrewed the jar bottom and replaced it with the new one. Coupling needed loosened by the maintenance person and he replaced them for us.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
0 of 3 people found this instruction helpful
Tool Type:
Blender
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Hammer
Couple worned down
Removed old coupling
Screwed on new coupling
Screwed on new coupling
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
1 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Fast service
Although the part appears to be correct, and I received it quickly, I was unable to take the old part off. So I will be sending it to the manufacturer along with the replacement part.
Guest -
April 30, 2020
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information
