Easy
15-30 minutes
This cord is a genuine Metabo replacement part and is sold individually.
This cord is made for double insulated tools
It is a two wire cord with two prongs and does not need a ground wire.
It is used on all of the Metabo tools shown below.
Cord Set 344492750
OEM part for: Metabo
Part Number: 344492750
$20.72
Factory Backorder
Date Available: Unknown 
Jump To:
Product Description ?
- 16 gauge, 2 wire, 9 ft
- Classification: Part
- Weight: 0.53 lbs.
- Also Known As: AC Cord, Power Supply Cord, Cord Set, Electric Cord
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This Cord Set will fit the following 142 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Displaying 20 of 142 matching models.
Metabo
Show More Compatible Models142 total model matches. Try the above search to narrow your results.
This is the official OEM part for the following brands:
- Metabo
This item works with the following types of products:
- Drill
- Electric Drill
- Grinder
- Jig saw
- Miter Saw
- Nibbler
- Polisher
- Sander
- Saw
- Shear
This part replaces obsolete part #: 344499600, 34449056, 344498490, 655065000, 344497260, 1010710266, 344498020, 344493600
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
6
4 stars
2
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Perfect replacement, east repair
Product came ready to be installed with the cable sleeve pre cut. Was very simple to restore my metabo grinder to like new after the cord wore out.
Guest -
November 12, 2022
Verified Purchase
Excellent Service Great Product !!!!!
Everything is Great!!!
Guest -
July 23, 2022
Verified Purchase
Very Easy
Arrived quickly and easy to fix. Great job eReplasementParts.
Guest -
June 4, 2022
Verified Purchase
Perfect replacement part
Prompt delivery
Guest -
June 6, 2020
Verified Purchase
Just what is needed
Fits perfectly and is the type of material that doesn't get stiff when cold.
William -
December 3, 2019
Verified Purchase
great part
now my grinders meet code on more problems with inspectors pulling them off line
Paul -
August 15, 2019
Verified Purchase
Cord
Very fast shipping
Scott -
May 1, 2020
Verified Purchase
Fast courteous service, great people to work with.
Parts were as stated,good as new again.
Guest -
December 14, 2019
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Cord Set
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Cord was cut during use
T - January 13, 2016
👍 4 of 5 people found this instruction helpful
Tool Type
Grinder
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, wire stripper
Parts Used
Take cover off
Remove cord wires from switch
Remove damaged cord and cord clamp
Slide on old cord relief
Install new cord wires in switch
Replace cover
Check for proper operation
Remove cord wires from switch
Remove damaged cord and cord clamp
Slide on old cord relief
Install new cord wires in switch
Replace cover
Check for proper operation
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Power cord was cut and brushes were worn
keith - June 26, 2017
👍 2 of 3 people found this instruction helpful
Tool Type
Grinder
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Torx bits
Separated plastic case took out screws for cord installed new one . Pulled out brushes and pushed in new ones and reassembled
Did you find this story helpful?
Thanks for voting and helping fellow customers!
A helper cut my grinder cord by accident.
William - August 6, 2020
Tool Type
Grinder
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver
Parts Used
Opened grinder up removed old cord replaced with new cord.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Cord cut
Chris - June 7, 2020
Tool Type
Grinder
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Removed three screws that held the side covers on.
Loosened the two screws that held the wires
Remove cord restraint
Install new cord and replace side covers
Loosened the two screws that held the wires
Remove cord restraint
Install new cord and replace side covers
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Bad cord and faulty switch.
Marc - March 19, 2020
Tool Type
Grinder
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Removed screws from housing
disconnected cord from switch
disconnected witch from internal wiring
reconnected cord to switch
reconnected switch to internal wiring
screwed the switch and cord back into place
screwed housing back together
disconnected cord from switch
disconnected witch from internal wiring
reconnected cord to switch
reconnected switch to internal wiring
screwed the switch and cord back into place
screwed housing back together
Did you find this story helpful?
Thanks for voting and helping fellow customers!
old cord cracked and peeling
Daryl - April 8, 2019
Tool Type
Grinder
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, soldering iron
Parts Used
1. remove the switch cover 2.loosen the screws on the switch and remove the old cord 3.cut wires to length 4. strip and solder the tip of each wire 5.insert the wires into the switch and tighten the screws 6.put the cover back on ...done
Did you find this story helpful?
Thanks for voting and helping fellow customers!
cut cord
H.William - February 15, 2019
Tool Type
Grinder
Difficulty
Medium
Time
Less than 15 minutes
Tools Used
Screwdriver, trox
Parts Used
Split the tool in half, replaced the cord, re-assembled.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Brushes were wore out and cord was cut
Lynn - February 14, 2019
Tool Type
Grinder
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Nutdriver, solder and iron
1. removed switch housing with torx driver
2. lifted brush spring with small screwdriver
3. pulled brush out with a pair of needle nose pliers
4. replaced brushes with new ones
5. remove screws from switch and pull out cord
6. strip cord to the correct length
7. solder ends of cord
8. replace cord
9. replace switch cover
2. lifted brush spring with small screwdriver
3. pulled brush out with a pair of needle nose pliers
4. replaced brushes with new ones
5. remove screws from switch and pull out cord
6. strip cord to the correct length
7. solder ends of cord
8. replace cord
9. replace switch cover
Did you find this story helpful?
Thanks for voting and helping fellow customers!
brushes worn out and cord damaged
Douglas - December 21, 2018
Tool Type
Grinder
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
changed cord and brushes. grinder works again.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Power cord jacket starting to crack open.
Tommaney - September 25, 2018
Tool Type
Grinder
Difficulty
Easy
Time
15-30 minutes
Tools Used
Pliers, Torx wrench, plier and wire stripper cripper.
Took the covers off just the half on my grinder, blew out all the fine dust accumulation in the housing with air compressor and replace the power cord and brushes, now its is as good as new almost.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Learn MoreOur product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
