Milwaukee Parts

Cord Set 22-64-0405

OEM part for: Milwaukee

Part Number: 22-64-0405


Install
Videos!
Cord Set - 22-64-0405:Milwaukee 360 View
Cord Set - 22-64-0405:MilwaukeeCord Set - 22-64-0405:MilwaukeeCord Set - 22-64-0405:Milwaukee 360 View
In Stock
Ships within 1 business day
Easy 15-30 minutes (10 rated repairs)?
OEM: Original Equipment Manufacturer ?
Milwaukee

Product Description ?

This genuine OEM part is manufactured by Milwaukee. It is compatible with a variety of their handheld power tools. This one (1) piece set includes plug, cord, and cord protector. A cord protector prevents damage to the cord by reducing strain put on the point of connection between wires and machine. Replace this set when any component is damaged.

  • Wires: 3
  • Type: Bare Wire
  • Classification: Part
  • Weight: 0.70 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This is the official OEM part for the following brands:

  • Milwaukee

This item works with the following types of products:

  • Cordless Drill
  • Core Drill
  • Drill
  • Drill Press
  • Electric Drill
  • Hammer Drill
  • Rotary Hammer
  • Saw
  • Screwdriver

This part replaces obsolete part #: 22-64-0210, 22-64-0200, 22-64-0170, 22-64-0385

Customer Part Reviews ?

5
Average Rating (out of 5):
4 Reviews
Click to filter by ratings:
5 stars
4
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • OEM Replacement power cord for 1/2" Milwaukee Drill
    Always appreciate eReplacementParts quick service and stocking many OEM parts. Only thing that would have made it perfect was if three electrical butt splices would have been completed - but inexpensive and easy to obtain. Thanks for great products.
    Milton - September 16, 2022 Verified Purchase
    Easy Transaction
    Easy to find, fast shipping, a very smooth transaction.
    Guest - July 30, 2021 Verified Purchase
    Great factory part
    Cord was excellent easy to install. I was operational in less than 10 minutes
    Guest - June 1, 2021 Verified Purchase
    Great for older Hole Hawg
    I had to cut the ends with the connector pins off the old cord and reuse them but the cord was good quality and the molded strain relief fit perfectly.
    Larry - September 9, 2020 Verified Purchase

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Cord Set


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy 15-30 minutes (10 rated repairs)?

    My old cord was worn

    Kyle - April 1, 2016
    👍 7 of 10 people found this instruction helpful
    Tool Type

    Reciprocating Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Remove handle cover, then remove cord clamp. You then remove the old cord wires from the switch and ground wire and discard old cord. Attach the new cord wires to the switch and attach the ground wire, Reattach the cord clamp, tuck the wires out of the way so the won't get pinched, then screw the handle cover back on.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Cracked and worn cord set.

    Howard - November 28, 2016
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Electric Drill

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Solderless crimping tool

    Installed new cord set on drill motor after installing terminals on wires. Very simple, wires are color coded and cord protector fit perfectly in the drill motor handle.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Broken cord

    Pete - December 12, 2018
    Tool Type

    Electric Drill

    Difficulty

    Medium

    Time

    30-60 minutes

    Tools Used

    Screwdriver, Pliers, soldering iron

    Basically easy but was disappointed that the replacement cord lacked the connectors. They re not standard so I had to remove them from the old cord (a PITA) and attach them o the new cord.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Broken wires at connection to angle drill

    doug - December 5, 2017
    Tool Type

    Electric Drill

    Difficulty

    Medium

    Time

    30-60 minutes

    Tools Used

    Screwdriver, Pliers, Nutdriver

    Separate handle halves....Remove old cord...Cut off wire connectors...Install new cord in notches of handle.....Reconnect two wire with new wire connectors(not provided) to drill motor....Reattach handle halves.... Plug in test drill
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Needed a new cord and switch

    Ronald - August 12, 2017
    Tool Type

    Hammer Drill

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, wire strippers ,crimpers

    Removed one half of the switch handle
    Removed the switch from the handle
    Made a wiring diagram, check for continuity, new switches wire differently.
    Remove the ground wire and the switch and old cord
    Install the wires into the switch
    Install the ground wire
    Screw the switch into the handle
    Attach the handle to the drill
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    The protective cover of the power cord on my Milwaukee Sawzall had disintegrated.

    Donald - July 4, 2017
    Tool Type

    Drill

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Pliers, soldering iron

    Removed one side of the plastic casing, about 5 screws
    Cut the power and ground wire to free from saw motor
    Positioned the new power cord and soldered the new leads to the appropriate lug
    Replaced the side casing and secured with screws.

    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Cord was split in many spots

    Dick - March 22, 2017
    Tool Type

    Electric Drill

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Pliers

    Removed screws in handle to get access to inside to replace the cord.
    Replaced cord and put handle back together and tighten the screws.
    1/2" drill is 50 plus years old..... original cord....
    There is nothing special about replacing the power cord.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Cord insulation showing

    Michael - January 28, 2017
    Tool Type

    Hammer Drill

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver

    Took the handle apart
    Removed the cord wires from the switch and the ground wire
    Connected the new cord wires to the switch along with connecting the ground wire
    Made sure all of the parts were where they belong , then put the handle together
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Needed new power cord .Reciprocating saw

    Lee - August 11, 2016
    Tool Type

    Band Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Removed both carbon brushes, about 8 screws to remove one side of handle cut old cord wires. Replaced cord set 18-36 w/protector.
    Great service from eReplacementParts.com
    Lee M.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Bad cord

    Bruce - July 22, 2016
    Tool Type

    Reciprocating Saw

    Difficulty

    Medium

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Pliers

    Just replaced the old cord with the new one.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Learn More

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal
    Recent searches:
    Suggested searches:
    Models:
    Manufacturers:
    Need help finding your model number?