Medium
30-60 minutes
Genuine OEM sourced replacement part designed for use with Milwaukee band saws. It is made out of rubber and metal. It is sold individually. Due to the use or other factors a cord can crack or get damaged otherwise. It is important to replace a damaged cord before continuing to use your equipment. Please note the cord protector/grommet is sold separately.
Cord Set 22-64-3200
OEM part for: Milwaukee
Part Number: 22-64-3200
$20.28
In Stock
Order within the next 12 hours and your part ships today! 
Jump To:
Frequently Purchased Together ?
Compatibility
This Cord Set will fit the following 27 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Displaying 20 of 27 matching models.
Milwaukee
Show More Compatible Models27 total model matches. Try the above search to narrow your results.
This is the official OEM part for the following brands:
- Milwaukee
This item works with the following types of products:
- Band Saw
- Rotary Hammer
- Saw
Repair Videos ?
Watch the Repair Video for
Cord Set
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Cord Set
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Band saw blade would not stay on pully
Wray - October 14, 2019
Tool Type
Band Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Socket set, Shop Press
1. remove band saw blade
2. removed drive pulley that wobbles
3. press out (2) old sleeve bearings
4. press in (2) new sleeve bearings
5. reinstall drive pulley with new rubber belt
6. reinstall band saw blade
7. Works like a brand new saw should.
2. removed drive pulley that wobbles
3. press out (2) old sleeve bearings
4. press in (2) new sleeve bearings
5. reinstall drive pulley with new rubber belt
6. reinstall band saw blade
7. Works like a brand new saw should.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Cord was intermitant
Gene - February 15, 2019
Tool Type
Band Saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers
Parts Used
removed old cord set and replaced with new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Worn out cord
William - April 24, 2017
Tool Type
Band Saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Removed the screw from the handle and the cord clamp
Disconnected the cord wires from the switch and the ground wire
Connected the ground wire and the new cord wires to the switch
Attached the cord clamp
Attached the handle
Disconnected the cord wires from the switch and the ground wire
Connected the ground wire and the new cord wires to the switch
Attached the cord clamp
Attached the handle
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Throwing a lot of sparks; cutting a little crooked; Cord was cut a few times and was pretty short.
Glynn - August 16, 2016
Tool Type
Band Saw
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver
Removed brush cover and old brush; dropped the curved end into brush holder and screwed brush cover back on; Do the same for both brushes. Make sure you have inserted the curved end first.
Remove old cord; remover two screws holding cord clamp in place; disconnect wires; and replace with new cord. I soldered a loop connector on the green ground wire and put solder on the naked ends of the white and black wired. Make sure the cord protector is on. Screw in the cord clamp and screw in the ground wire.
Remove blade and old tires, replace tires aligning groves of tires with knobs on wheels.
Replace front and rear blade guides. Each has two screws.
Replace blade
Remove old cord; remover two screws holding cord clamp in place; disconnect wires; and replace with new cord. I soldered a loop connector on the green ground wire and put solder on the naked ends of the white and black wired. Make sure the cord protector is on. Screw in the cord clamp and screw in the ground wire.
Remove blade and old tires, replace tires aligning groves of tires with knobs on wheels.
Replace front and rear blade guides. Each has two screws.
Replace blade
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Learn MoreOur product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
