*This part replaces obsolete part #: 1619X08308, 1619X02971, 2610005971, 1619X00943 and 2610005970.
Product Information
Description:
Frequently Purchased With
Compatibility
the 97 compatible machines
This part is compatible with the following machines:
Skil
HD5750 TYPE 2 (F01257500A) Circular Saw
HD5750 TYPE 2 (F01257500A) Circular Saw
5825 TYPE 2 (F01258250A) 6-1/2 in. Worm Drive Saw
HD77 Type 17 Worm Drive Saw (Skilsaw 77)
5860 (F012586099) Circular Saw
5860 (F012586099) Circular Saw
HD77M (F012HM7702) 7 1/4" Magnesium Worm Drive Skilsaw
SHD77 (F012SD7700) 7 1/4" Worm Drive Skilsaw
SHD77 (F012SD7705) 7 1/4" Worm Drive Skilsaw
SHD77M (F012SD7702) 7 1/4" Magnesium Worm Drive Skilsaw
SHD77M (F012SD7707) 7 1/4" Magnesium Worm Drive Skilsaw
HD77M-72 (F012HM7772) 7 1/4" Magnesium Worm Drive Skilsaw
HD5860 (F01258600A) Worm Drive Skilsaw
HD77-72 7-1/4 Worm Drive Saw w/Twist Lock
5865 Power Saw
MAG77LT (F012XD7700) Worm Drive Skilsaw
MAG77LT (F012XD7701) Worm Drive Skilsaw
HD77 (F012HD77LA) Circular Hand Saw
HD77 (F012HD77LA) Circular Hand Saw
SHD77M (F012SD7712) Circular Hand Saw
SHD77M (F012SD7712) Circular Hand Saw
HD77M (F012HM7700) Circular Hand Saw
HD77M (F012HM7700) Circular Hand Saw
MAG77-75 7-1/4" Skilsaw
SHD77-72 7-1/4" Skilsaw Worm Drive Skilsaw with Twist Lock
HD 5825 (F01258250A) Circular Hand Saw
SPT67W (F012671000) Circular Hand Saw
SPT67WL (F012671100) Circular Hand Saw
SPT67WM (F012671200) Circular Hand Saw
SPT67FMD (F012675100) Circular Hand Saw
SPT67M8 (F01267M800) Circular Hand Saw
SPT70WM (F012701000) Circular Hand Saw
SPT70WM (F012701001) Circular Hand Saw
SPT77W (F012771000) Circular Saw
SPT77W (F012771001) Circular Saw
SPT77WM (F012771100) Circular Saw
HD5750 TYPE 2 (F01257500A) Circular Saw
5825 TYPE 2 (F01258250A) 6-1/2 in. Worm Drive Saw
HD77 Type 17 Worm Drive Saw (Skilsaw 77)
5860 (F012586099) Circular Saw
5860 (F012586099) Circular Saw
HD77M (F012HM7702) 7 1/4" Magnesium Worm Drive Skilsaw
SHD77 (F012SD7700) 7 1/4" Worm Drive Skilsaw
SHD77 (F012SD7705) 7 1/4" Worm Drive Skilsaw
SHD77M (F012SD7702) 7 1/4" Magnesium Worm Drive Skilsaw
SHD77M (F012SD7707) 7 1/4" Magnesium Worm Drive Skilsaw
HD77M-72 (F012HM7772) 7 1/4" Magnesium Worm Drive Skilsaw
HD5860 (F01258600A) Worm Drive Skilsaw
HD77-72 7-1/4 Worm Drive Saw w/Twist Lock
5865 Power Saw
MAG77LT (F012XD7700) Worm Drive Skilsaw
MAG77LT (F012XD7701) Worm Drive Skilsaw
HD77 (F012HD77LA) Circular Hand Saw
HD77 (F012HD77LA) Circular Hand Saw
SHD77M (F012SD7712) Circular Hand Saw
SHD77M (F012SD7712) Circular Hand Saw
HD77M (F012HM7700) Circular Hand Saw
HD77M (F012HM7700) Circular Hand Saw
MAG77-75 7-1/4" Skilsaw
SHD77-72 7-1/4" Skilsaw Worm Drive Skilsaw with Twist Lock
HD 5825 (F01258250A) Circular Hand Saw
SPT67W (F012671000) Circular Hand Saw
SPT67WL (F012671100) Circular Hand Saw
SPT67WM (F012671200) Circular Hand Saw
SPT67FMD (F012675100) Circular Hand Saw
SPT67M8 (F01267M800) Circular Hand Saw
SPT70WM (F012701000) Circular Hand Saw
SPT70WM (F012701001) Circular Hand Saw
SPT77W (F012771000) Circular Saw
SPT77W (F012771001) Circular Saw
SPT77WM (F012771100) Circular Saw
SPT77WML (F012771200) Circular Saw
SPT77WML (F012771201) Circular Saw
SPT79 (F012791000) Circular Hand Saw
SPT 79 A (F012792000) Circular Hand Saw
HD 7780 (F012HD77PM) Un-Hd Port. Circular Saw
SHD77M72 (F012SD7703) Circular Hand Saw
SHD77M72 (F012SD7713) Circular Hand Saw
MAG7777 (F012SD7715) Circular Hand Saw
77 (F012007799) Circular Hand Saw
SPT67FMD-01 Saw 7-1/4 In. Sidewinder Circular Saw For Fiber Cement; Sawblade
SPT67FMD-22 Saw 7-1/4 In. Sidewinder Circular Saw For Fiber Cement
SPT67M8-01 Saw 7-1/4 In. Left Blade Sidewinder Circular Saw, Southpaw
SPT70WM-01 Saw 10-1/4 In. Magnesium Sawsquatch Worm Drive Saw; Saw Blade
SPT77W-01 Saw 7-1/4 In. Worm Drive Saw; Sawblade
SPT77W-22 Saw 7-1/4 In. Worm Drive Saw
SPT77WM-22 Saw 7-1/4 In. Magnesium Worm Drive Saw
SPT77WML-01 Saw 7-1/4 In. Lightweight Worm Drive Saw
SPT77WML-22 Saw 7-1/4 In. Lightweight Magnesium Worm Drive Saw
SPT77WML-72 Saw 7-1/4 In. Lightweight Worm Drive Saw With Twist Lock Plug
SPT78MMC-01 Saw 8 In. Outlaw Worm Drive For Metal; Sawblade
SPT79-00 Saw 7 In. Medusaw Worm Drive For Concrete
SPT79A-10 Saw 7 In. Medusaw Walk Behind Worm Drive For Concrete
SPT67WL-01 Circular Saw
SPT67WL-22 Circular Saw
SPT67WM-22 Circular Saw
SPT67WMB-01 Circular Saw
SPT67WMB-22 Circular Saw
SPT70WM-22 Circular Saw
SPT70WM-72 Circular Saw
SPT78MMC-22 Circular Saw
SPT78W-01 Circular Saw
SPT78W-22 Circular Saw
SPT70WM-71 (A) 10-1 4 In. Magnesium Worm Drive Skil With Twist Lock
SPT77W-71 (A) 7-1 4 In. Worm Drive Skil With Twist Lock Plug
SPT77WML-71 (A) 7-1 4 In. Lightweight Worm Drive Skil With Twist Lock Plug
SPT77WML (F012771201) Circular Saw
SPT79 (F012791000) Circular Hand Saw
SPT 79 A (F012792000) Circular Hand Saw
HD 7780 (F012HD77PM) Un-Hd Port. Circular Saw
SHD77M72 (F012SD7703) Circular Hand Saw
SHD77M72 (F012SD7713) Circular Hand Saw
MAG7777 (F012SD7715) Circular Hand Saw
77 (F012007799) Circular Hand Saw
SPT67FMD-01 Saw 7-1/4 In. Sidewinder Circular Saw For Fiber Cement; Sawblade
SPT67FMD-22 Saw 7-1/4 In. Sidewinder Circular Saw For Fiber Cement
SPT67M8-01 Saw 7-1/4 In. Left Blade Sidewinder Circular Saw, Southpaw
SPT70WM-01 Saw 10-1/4 In. Magnesium Sawsquatch Worm Drive Saw; Saw Blade
SPT77W-01 Saw 7-1/4 In. Worm Drive Saw; Sawblade
SPT77W-22 Saw 7-1/4 In. Worm Drive Saw
SPT77WM-22 Saw 7-1/4 In. Magnesium Worm Drive Saw
SPT77WML-01 Saw 7-1/4 In. Lightweight Worm Drive Saw
SPT77WML-22 Saw 7-1/4 In. Lightweight Magnesium Worm Drive Saw
SPT77WML-72 Saw 7-1/4 In. Lightweight Worm Drive Saw With Twist Lock Plug
SPT78MMC-01 Saw 8 In. Outlaw Worm Drive For Metal; Sawblade
SPT79-00 Saw 7 In. Medusaw Worm Drive For Concrete
SPT79A-10 Saw 7 In. Medusaw Walk Behind Worm Drive For Concrete
SPT67WL-01 Circular Saw
SPT67WL-22 Circular Saw
SPT67WM-22 Circular Saw
SPT67WMB-01 Circular Saw
SPT67WMB-22 Circular Saw
SPT70WM-22 Circular Saw
SPT70WM-72 Circular Saw
SPT78MMC-22 Circular Saw
SPT78W-01 Circular Saw
SPT78W-22 Circular Saw
SPT70WM-71 (A) 10-1 4 In. Magnesium Worm Drive Skil With Twist Lock
SPT77W-71 (A) 7-1 4 In. Worm Drive Skil With Twist Lock Plug
SPT77WML-71 (A) 7-1 4 In. Lightweight Worm Drive Skil With Twist Lock Plug
Bosch
CS10 (0601672039) 7-1/4" Circular Saw
CS10 (0601672039) 7-1/4" Circular Saw
1677M (0601677039) 7-1/4" Worm Drive Saw
1678A (0601678039) 7-1/4" Worm Drive Saw
1677C-100 (0601677168) Circular Saw
1677C-100 (0601677168) Circular Saw
1677DC-100 (0601677190) Circular Saw
1677DC-100 (0601677190) Circular Saw
CS10 (0601672057) Circular Saw
CS10 (0601672057) Circular Saw
CS10 (0601672062) Circular Saw
CS10 (0601672062) Circular Saw
CS10 (0601672069) Circular Saw
CS10 (0601672039) 7-1/4" Circular Saw
1677M (0601677039) 7-1/4" Worm Drive Saw
1678A (0601678039) 7-1/4" Worm Drive Saw
1677C-100 (0601677168) Circular Saw
1677C-100 (0601677168) Circular Saw
1677DC-100 (0601677190) Circular Saw
1677DC-100 (0601677190) Circular Saw
CS10 (0601672057) Circular Saw
CS10 (0601672057) Circular Saw
CS10 (0601672062) Circular Saw
CS10 (0601672062) Circular Saw
CS10 (0601672069) Circular Saw
CS10 (0601672069) Circular Saw
CS10 (0601672073) Circular Saw
CS10 (0601672073) Circular Saw
1678 (0601678039) Un-Hd Port. Circular Saw
CSW41 (3601F6D010) Circular Saw
CSW41 (3601F6D011) Circular Hand Saw
SPT67WMB (F012672200) Circular Hand Saw
SPT78MMC (F012782000) Circular Hand Saw
HD77 (F012HD7720) Circular Saw
SHD77 (F012SD7720) Circular Saw
SHD77 (F012SD7721) Circular Saw
MAG77 (F012SD7722) Circular Saw
MAG77 (F012SD7723) Circular Saw
CS10 (0601672073) Circular Saw
CS10 (0601672073) Circular Saw
1678 (0601678039) Un-Hd Port. Circular Saw
CSW41 (3601F6D010) Circular Saw
CSW41 (3601F6D011) Circular Hand Saw
SPT67WMB (F012672200) Circular Hand Saw
SPT78MMC (F012782000) Circular Hand Saw
HD77 (F012HD7720) Circular Saw
SHD77 (F012SD7720) Circular Saw
SHD77 (F012SD7721) Circular Saw
MAG77 (F012SD7722) Circular Saw
MAG77 (F012SD7723) Circular Saw
Products Compatibility
This item works with the following types of products:
- • Circular Saw
- • Saw
Repair Guides
Articles:
Step-by-step instructions for removing and installing the cord guard on your Skilsaw....
October 09, 2017
|
Questions & Answers for Cord Guard
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
5 of 5 people found this instruction helpful
Tool Type:
Circular Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
30-year old Skilsaw needed a little maintenance. ereplacementparts were perfect.
Remove the screws from the handle assembly, then unscrew switch from handle and remove the cord clamp. Remove the cord leads from the switch and the ground wire. Discard old cord. Slide the new cord relief onto the new cord. Install the cord leads on the switch , then the ground lead. Attach switch to handle , then put the cord clamp back on. Press the handle together. Make sure there are no wires being pinched, then install the handle on to the saw. To replace the brushes. Remove the brush caps with a screwdriver, then remove the old brushes. Install the new brushes, then screw the brush caps back on. Check oil level in the saw and add more if needed.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Circular Saw
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Torx Bits and DeWalt Impact Gun
Replaced dry rotted cord and cord guard on my newly acquired 77HD Skilsaw
First I removed the screws from the handle on my 77HD Skilsaw, then I removed the screws from the strain relief and the switch. I then unscrewed the positive and negative leads from the switch and the ground screw from the body of the saw. Pulled the old cord and cord guard out and replaced with the new ones, replaced the leads on the wire, making sure I routed everything properly, tightened all the mounting screws to the proper torque, put the handle back on and tested the function of the saw. Worked perfectly!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Circular Saw
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
A lot of sparking in the motor; short cord.
Removed covers for brushes then replaced old brushes with new ones. Removed screws from handle assembly then removed screws holding terminals on old power cord. Replaced old cord with new one and replaced the screws. My vintage Skilsaw 825 worm drive is ready for another 50 years of use!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Circular Saw
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Handle was cracked and cord guard ripped
Unscrewed the old handle from saw removed cord end and trigger, installed handle slid cord guard over cord, reinstalled trigger in new handle, installed cover handle, finely installed all of the screws in handle.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Circular Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Torks tip screw driver
Table bent after dropping saw. Handle cracked. Trigger was not working correctly causing a safety issue.
Unscrew handle halves. Remove screws holding handle to saw and remove. Unscrew wires to trigger and remove. Screw handle half to saw that holds trigger. Install trigger wires to new switch and install into handle. Tuck in the wires as not to get pinched and install second half of handle and screw together. Install screws to a fix handle to saw. Table or foot repair starts with removing depth adjustment screw by removing retaining clip then handle and increasing nut. Remove nut at front of saw at the table. Remove table. Position table onto saw body and screw front screw and nut. Position rear adjustment arch into threaded stud and replace nut. Adjust the nut so the Table can go up and down. Position the lever so down is tight and up loosens enough to adjust depth. Install keeper e clip. On old table remove adjustment nut and install on new table. Just reverse the process to install. Done. Now the saw will cut square and the honey dos will go easy.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Circular Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set, Torks bit set and 1/4\\
Saw was dropped and fractured handles
Removed handle half on main grip, took picture for reference with phone to reference wiring on the switch, detached ground to motor case, removed switch and old cord and guard, transferred switch and attached new cord and guard to new grip half, removed old grip half and installed new grip half assembly and attached ground other new grip half and new top handle.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Circular Saw
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Bad cord on a skilsaw
Removed handle and replace cord and cord guard
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Circular Saw
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers
Sparking from brushes and burning smell. Cord guard was split.
1. On either side of saw there are plastic set screws which you remove and brushes pop right out.
2. Install new brushes. Very easy.
Cord guard a little more difficult.
1. Have to remove screws and open saw.
2. Remove cord and old guard.
3. Install new guard with cord and re-assemble
2. Install new brushes. Very easy.
Cord guard a little more difficult.
1. Have to remove screws and open saw.
2. Remove cord and old guard.
3. Install new guard with cord and re-assemble
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Circular Saw
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
, Allen wrench
Start switch and cord strain relief broken
1). Used allen wrench to remove handle from saw body and separate into two halves
2). Used smaller allen wrench to unfasten start switch from housing
3). Used screwdriver to remove wires from start switch. Replacement switch though similar ran wires in slightly different pattern. Used ohm meter to verify correct contacts.
4). Old cord strain relief was removed and new one inserted and clamped to original mount using screwdriver.
5). Wires were reattached to new switch and then reattached switch to handle housing using Allen wrench.
6). Handle housing halves were reattached to each other and inserted into saw frame. All mounting screws were reinstalled.
7). Tested saw for running mode . Saw ran correctly and then installed new saw blade.
2). Used smaller allen wrench to unfasten start switch from housing
3). Used screwdriver to remove wires from start switch. Replacement switch though similar ran wires in slightly different pattern. Used ohm meter to verify correct contacts.
4). Old cord strain relief was removed and new one inserted and clamped to original mount using screwdriver.
5). Wires were reattached to new switch and then reattached switch to handle housing using Allen wrench.
6). Handle housing halves were reattached to each other and inserted into saw frame. All mounting screws were reinstalled.
7). Tested saw for running mode . Saw ran correctly and then installed new saw blade.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Circular Saw
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Torx bit
broken ground, dryrot cord relief
Removed handle half, removed ground screw, removed switch, removed cord from switch, removed cord anchor screws, Installed new cord with cord relief and re-assemble handle.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
show more
Reviews
21 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
21
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
- 2
- 3
worked perfectly, able to repair and have back in service quickly
Price was very reasonable, quick shipping and fit perfectly.
Robert -
April 17, 2023
Verified Purchase
Dependable source
The parts arrived sooner than expected so the needed repairs could be completed early. Thank you again.
Guest -
October 7, 2022
Verified Purchase
easy repair
arrived fast, easy repair, back to work
Charles -
March 5, 2022
Verified Purchase
Could not be happier with the parts and treatment I received.
Parts fit as they should have, totally pleased.
Guest -
February 24, 2022
Verified Purchase
Great it fit and Works
Craftsman Shop Vac filter retainer and wing nut that was lost in moving. FireDOCUSMC aka D.R. "Doc" Young
Guest -
February 1, 2022
Verified Purchase
I repaired a Skill 77 for a friend and the saw needed a w cord guard and 15amp pigtail. I have Replacement Parts bookmarked on my computer. I was able to get OEM parts at a very reasonable price and so this repair has a happy conclusion.
The OEM parts arrived and the repairs are concluded.
Harold -
November 27, 2021
Verified Purchase
Old School Model 77 Skil saw
Was great to be able to get original manufacturer parts for my old Skil saw. It ran great but the cord and cord guard were very deteriorated and really needed to be replaced.
Guest -
May 24, 2021
Verified Purchase
Quick and painless
Part arrived quickly, no excuses, easily installed. Will always use ereplacements for any future parts.
Guest -
December 7, 2020
Verified Purchase
Great price great product
All parts I order fit my skillsaw perfectly a happy customer.. and delivery was quick
Guest -
October 26, 2020
Verified Purchase
Quick repair
Parts were exactly identical to original and fitted perfectly, great to be able to get parts for skilsaw I have had for a long time.
Guest -
June 25, 2020
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
- 2
- 3
Product Information
Repair Guides
Articles:
Step-by-step instructions for removing and installing the cord guard on your Skilsaw....
October 09, 2017
|