Medium
15-30 minutes
This item has been sourced from the original manufacturer and is intended to be used with drum sanders. The conveyor belt wraps around the sander's drive rollers and table and is used to move material under the sanding drum. This part is sold as an individual item.
Conveyor Belt 60-0310-P
OEM part for: Jet
Part Number: 60-0310-P
$134.20
In Stock
Ships within 1 business day 
Compatibility
This part will fit the following 3 machines
Jet
10-20 Plus (628900) Drum Sander View Diagrams & Manuals
628900-10-20 62890010-20 Drum Sander Parts View Diagrams & Manuals
628900 10-20 Plus Benchtop View Diagrams & Manuals
This item works with the following types of products:
- Sander Parts
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Conveyor Belt
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Torn conveyor belt
david - March 10, 2021
Tool Type
Sander
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Socket set, Wrench Set
Parts Used
1 Unbolted the machine from the table
2 removed end plate
3 Removed the old belt
4 Installed new belt
5 Installed end plate
6 Re bolted to table
7 Re tensioned new belt
8 Ran machine to adjust tracking
2 removed end plate
3 Removed the old belt
4 Installed new belt
5 Installed end plate
6 Re bolted to table
7 Re tensioned new belt
8 Ran machine to adjust tracking
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Conveyor belt wore out
Lawrence - January 27, 2021
Tool Type
Sander
Difficulty
Easy
Time
15-30 minutes
Tools Used
Power Drill
Parts Used
Replaced
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Conveyor belt worn
David - September 17, 2018
Tool Type
Sander
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Tools supplied by manufacturer
Parts Used
1. Use built in ratchets to loosen nuts that tighten the belt.
2. Cut off the old conveyor belt.
3. Slid on the new conveyor belt.
4. Tighten the nuts using built in ratchets
5. Tested the system for the correct placement
6. Test sanded piece of wood for accuracy
2. Cut off the old conveyor belt.
3. Slid on the new conveyor belt.
4. Tighten the nuts using built in ratchets
5. Tested the system for the correct placement
6. Test sanded piece of wood for accuracy
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Conveyor belt was broken.
Bruce - January 30, 2018
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Pliers
Parts Used
Loosened the tension bolts, replaced the belt and tightened the tension screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Feed belt on the sander was broken
David - May 10, 2017
Tool Type
Sander
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
1) Loosen belt tension adjusters.
2) Remove 3 end plate screws.
3) Remove old belt.
4) Slip on new belt.
5) Install 3 end plate screws.
6) Adjust new belt tension.
2) Remove 3 end plate screws.
3) Remove old belt.
4) Slip on new belt.
5) Install 3 end plate screws.
6) Adjust new belt tension.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Old conveyor belt stretched and would not feed
David - March 23, 2017
Tool Type
Sander
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Wrench Set, Nutdriver
Parts Used
1. Release tension on belt
2. Remove end bracket.
3. Remove old belt.
4. Install new belt.
5. Replace end brackets.
6. Adjust belt tension
2. Remove end bracket.
3. Remove old belt.
4. Install new belt.
5. Replace end brackets.
6. Adjust belt tension
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
