Product Information
Description:
| This is an authentic OEM part. The natural gas, command center is constructed of metal and plastic parts, and is compatible with many vent fireplaces. This part is fitted onto the burner. The command center has been designed for the user to control the fireplace flames. This item is sold individually. A socket set and a nutdriver are helpful in the installation. Please keep in mind this part uses 4 "AA" batteries as a backup during power outages. The fireplace system is capable of operating on battery power for up to 6 months. |
Frequently Purchased With
Compatibility
the 66 compatible machines
This part is compatible with the following machines:
Majestic
300DVBH (Series DVBH7) Direct Vent Gas Fireplace
400DVBH (Series DVBH7) Direct Vent Gas Fireplace
300DVBL (Series DVBL7) Direct Vent Gas Fireplace
400DVBL (Series DVBL7) Direct Vent Gas Fireplace
500DVBL (Series DVBL7) Direct Vent Gas Fireplace
CDV7 Series Direct Vent Gas Fireplace
400BBV (B-Vent Series) Natural Vent Gas Fireplace
400SBV (B-Vent Series) Natural Vent Gas Fireplace
500SBV (B-Vent Series) Natural Vent Gas Fireplace
MLDV500 (MLDV Series) Direct Vent Gas Fireplace
300DVB (Series DVB7) Direct Vent Gas Fireplace
400DVB (Series DVB7) Direct Vent Gas Fireplace
500DVB (Series DVB7) Direct Vent Gas Fireplace
600DVB (Series DVB7) Direct Vent Gas Fireplace
500DVM (Series DVM) Direct Vent Gas Fireplace
400DVBH (Series DVBH7) Direct Vent Gas Fireplace
300DVBL (Series DVBL7) Direct Vent Gas Fireplace
400DVBL (Series DVBL7) Direct Vent Gas Fireplace
500DVBL (Series DVBL7) Direct Vent Gas Fireplace
CDV7 Series Direct Vent Gas Fireplace
400BBV (B-Vent Series) Natural Vent Gas Fireplace
400SBV (B-Vent Series) Natural Vent Gas Fireplace
500SBV (B-Vent Series) Natural Vent Gas Fireplace
MLDV500 (MLDV Series) Direct Vent Gas Fireplace
300DVB (Series DVB7) Direct Vent Gas Fireplace
400DVB (Series DVB7) Direct Vent Gas Fireplace
500DVB (Series DVB7) Direct Vent Gas Fireplace
600DVB (Series DVB7) Direct Vent Gas Fireplace
500DVM (Series DVM) Direct Vent Gas Fireplace
600DVM (Series DVM) Direct Vent Gas Fireplace
WDV500 Wideview Direct Vent Gas Fireplace
WDV600 Wideview Direct Vent Gas Fireplace
WDVST500 Wideview Direct Vent Gas Fireplace
KHLDV400 (KHLDV Series) Electric Fireplace Insert
KHLDV500 (KHLDV Series) Electric Fireplace Insert
KHLDV600 (KHLDV Series) Electric Fireplace Insert
STLDVNS/PS Direct Vent Gas Fireplace
CLLDVNS/PS Direct Vent Gas Fireplace
CRLDVNS/PS Direct Vent Gas Fireplace
PFLDVNS/PS Direct Vent Gas Fireplace
BVSTNSC Natural Vent Gas Fireplace
BVPNSC Natural Vent Gas Fireplace
18NB (18NB Series) Unvented Gas Log Heater
24NB (24NB Series) Unvented Gas Log Heater
WDV500 Wideview Direct Vent Gas Fireplace
WDV600 Wideview Direct Vent Gas Fireplace
WDVST500 Wideview Direct Vent Gas Fireplace
KHLDV400 (KHLDV Series) Electric Fireplace Insert
KHLDV500 (KHLDV Series) Electric Fireplace Insert
KHLDV600 (KHLDV Series) Electric Fireplace Insert
STLDVNS/PS Direct Vent Gas Fireplace
CLLDVNS/PS Direct Vent Gas Fireplace
CRLDVNS/PS Direct Vent Gas Fireplace
PFLDVNS/PS Direct Vent Gas Fireplace
BVSTNSC Natural Vent Gas Fireplace
BVPNSC Natural Vent Gas Fireplace
18NB (18NB Series) Unvented Gas Log Heater
24NB (24NB Series) Unvented Gas Log Heater
Monessen
KSTDV500 (Series KSTDV) Direct Vent Gas Fireplace
STLDVNS/PS Direct Vent Gas Fireplace
CLLDVNS/PS Direct Vent Gas Fireplace
CRLDVNS/PS Direct Vent Gas Fireplace
PFLDVNS/PS Direct Vent Gas Fireplace
400BBV (B-Vent Series) Natural Vent Gas Fireplace
400SBV (B-Vent Series) Natural Vent Gas Fireplace
500SBV (B-Vent Series) Natural Vent Gas Fireplace
BDV300 Direct Vent Gas Fireplace
BDV400 Direct Vent Gas Fireplace
BDV500 Direct Vent Gas Fireplace
BDV600 Direct Vent Gas Fireplace
KSTDV500 Direct Vent Gas Fireplace
HBDV300 (HBDV7 Series) Vent Free Fireplace System
HBDV400 (HBDV7 Series) Vent Free Fireplace System
BLDV300 (BLDV7 Series) Direct Vent Gas Fireplace
STLDVNS/PS Direct Vent Gas Fireplace
CLLDVNS/PS Direct Vent Gas Fireplace
CRLDVNS/PS Direct Vent Gas Fireplace
PFLDVNS/PS Direct Vent Gas Fireplace
400BBV (B-Vent Series) Natural Vent Gas Fireplace
400SBV (B-Vent Series) Natural Vent Gas Fireplace
500SBV (B-Vent Series) Natural Vent Gas Fireplace
BDV300 Direct Vent Gas Fireplace
BDV400 Direct Vent Gas Fireplace
BDV500 Direct Vent Gas Fireplace
BDV600 Direct Vent Gas Fireplace
KSTDV500 Direct Vent Gas Fireplace
HBDV300 (HBDV7 Series) Vent Free Fireplace System
HBDV400 (HBDV7 Series) Vent Free Fireplace System
BLDV300 (BLDV7 Series) Direct Vent Gas Fireplace
BLDV400 (BLDV7 Series) Direct Vent Gas Fireplace
BLDV500 (BLDV7 Series) Direct Vent Gas Fireplace
WDVST500 Wideview Direct Vent Gas Fireplace
MLDV500 Direct Vent Gas Fireplace
WDV500 Wideview Direct Vent Gas Fireplace
WDV600 Wideview Direct Vent Gas Fireplace
BVSTNSC (B Vent Specialty Series) Natural Vent Gas Fireplaces
BVPNSC (B Vent Specialty Series) Natural Vent Gas Fireplaces
ICFDV30LNTSC Direct Vent Gas Fireplace Insert
KHLDV400 (KHLDV Series) Electric Fireplace Insert
KHLDV500 (KHLDV Series) Electric Fireplace Insert
KHLDV600 (KHLDV Series) Electric Fireplace Insert
NB18 Unvented Gas Log Heater
NB24 Unvented Gas Log Heater
BLDV400NSC7 BLDV7 Series Direct Vent Gas Fireplace
BLDV500 (BLDV7 Series) Direct Vent Gas Fireplace
WDVST500 Wideview Direct Vent Gas Fireplace
MLDV500 Direct Vent Gas Fireplace
WDV500 Wideview Direct Vent Gas Fireplace
WDV600 Wideview Direct Vent Gas Fireplace
BVSTNSC (B Vent Specialty Series) Natural Vent Gas Fireplaces
BVPNSC (B Vent Specialty Series) Natural Vent Gas Fireplaces
ICFDV30LNTSC Direct Vent Gas Fireplace Insert
KHLDV400 (KHLDV Series) Electric Fireplace Insert
KHLDV500 (KHLDV Series) Electric Fireplace Insert
KHLDV600 (KHLDV Series) Electric Fireplace Insert
NB18 Unvented Gas Log Heater
NB24 Unvented Gas Log Heater
BLDV400NSC7 BLDV7 Series Direct Vent Gas Fireplace
Vermont
Products Compatibility
This item works with the following types of products:
- • Fireplace
- • Heater
Repair Guides
![]()
Articles:
|
Having trouble getting your grill to light up? A common cause of this issue is a defective ignition switch. We'll sho...
November 08, 2012
|
Questions & Answers for Command Center - Natural Gas
What would cause the red light to blink on control box?
Johnny
asked on 2024-01-13
Hi Johnny,
Thank you for your question. If the red light is flashing, you may have a dirty pilot burner. We hope this helps!
eReplacementParts Team January 13, 2024
Repair Instructions: Submitted by Customers Like You
1 of 1 people found this instruction helpful
Tool Type:
Fireplace
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Nutdriver
Main flame would come on but would immediately go out.
Troubleshooting with owner’s manual suggested the exhaust vent could be plugged. It wasn’t and I proved it by removing the glass completely and same result. I hypothesized it was a control issue but the manual was useless in that regard. So I ordered both the control box & command center and figured it had to be one of them. And sure enough it was! I elected to replace them both instead of one at a time and then trying. I would recommend this way anyhow. It’s likely what a service call would do. I figured I saved $500 at least by repairing it myself. I wholeheartedly highly recommend eReplacementParts.com. Thank you!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Fireplace
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Would not turn on. Made the beep sound but no flame.
Turned unit off at circuit breaker.
Unplugged old unit.
Replaced batteries from old unit to new one. Plugged in new unit.
Cables are site specific so no worry’s one remembering where to plug in.
Viola!!!
Unplugged old unit.
Replaced batteries from old unit to new one. Plugged in new unit.
Cables are site specific so no worry’s one remembering where to plug in.
Viola!!!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Fireplace
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
No gas being supplied to igniter . Battery box corroded
Next year during summer don't forget to remove your battery's.
Unplug old, Plug in new. Works like a champ.
Unplug old, Plug in new. Works like a champ.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Fireplace
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
The fireplace wouldn't light
Ordered part
Remove old part, after removal of 2 screws
Connect new part
2 screws back on
Turned on fireplace
That easy
10 minutes
Remove old part, after removal of 2 screws
Connect new part
2 screws back on
Turned on fireplace
That easy
10 minutes
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Fireplace
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Original equipment failed.
Removed OE parts and replaced with new parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Fireplace
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, install batteries and attach unit
Spring for battery had come off
Installed new batteries into unit and then hooked it up to wire for fireplace.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Fireplace
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Command center failed.
1. Removed the lower front vent grill from the fireplace.
2. Unplugged the old command center.
3. Plugged in the new command center.
4. Installed the batteries.
5. Reinstalled the front grill on the fireplace.
2. Unplugged the old command center.
3. Plugged in the new command center.
4. Installed the batteries.
5. Reinstalled the front grill on the fireplace.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Fireplace
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, No Tools Required
Fireplace would not turn off with the wall switch
1. Removed the lower front grill
2. Unplugged the command center
3. Put new batteries in the new command center
4 Plugged in the new command center
5. Replaced the front grill
Several of my neighbors have had problems with their Monessen CDV7 fireplaces. The command center solves most issues that I have seen with igniting and turning off.
2. Unplugged the command center
3. Put new batteries in the new command center
4 Plugged in the new command center
5. Replaced the front grill
Several of my neighbors have had problems with their Monessen CDV7 fireplaces. The command center solves most issues that I have seen with igniting and turning off.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Fireplace
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Would not control fireplace
Replaced command module. Unplugged old,plugged in new. Turned on and worked great
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Fireplace
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Leaked battery destroyed original command center
Just added batteries and plugged it in.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
show more
Reviews
4 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
4
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Easy repair, good quality part and fast delivery.
My control box for my fireplace logs was in great shape. It was very well protected and arrived in great working order.
Terry -
January 27, 2023
Verified Purchase
Very responsive.
Part arrived on time, works great.
Guest -
December 15, 2022
Verified Purchase
Fast delivery & exactly what I needed.
The gas fireplace was 10 years old and I wasn’t sure if I could still get parts. You came though with fast delivery and the exact right part. Thank you
Guest -
October 18, 2022
Verified Purchase
Exact Replacement Part - Worked Great!
The Fireplace command center arrived quickly and worked perfectly.
Guest -
December 10, 2020
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information
Repair Guides
![]()
Articles:
|
Having trouble getting your grill to light up? A common cause of this issue is a defective ignition switch. We'll sho...
November 08, 2012
|
