1/4" Collet Adapter 1619X03843
Part Number: 1619X03843
Product Information
Description:
| This is a Genuine Manufacturer Approved replacement part used on Routers and Jig Saws. This part provides a firm grip for holding a bit in a tool. It is made out of Metal and is Sold Individually. This Collet is for using bits with 1/4" arbors only. Due to prolonged, heavy use a Collet may need to be replaced eventually. Please note Collet Nut that fastens this item to the Drive Shaft is sold separately. To replace this Collet you would need to use an Adjusting Wrench to remove the Collet Nut. Once the Nut is removed you can remove the old but and place a new one in place. Then, simply tighten the Collet Nut back in place and your unit is ready to use 1/4 Bits. |
No Longer Available:
Unfortunately, this part isn't available any more at eReplacementParts. This could be because:
- The manufacturer doesn't make this part any more
- There are no substitute parts made by the manufacturer to replace this part
- There is no longer any way for us to find this part and stock it in our warehouse
We would love to help you find the part you need, but our call center agents will, regrettably, be unable to assist you with tracking it down. However, you may still be able to locate the part you need by trying the following:
- Using a search engine to type your part number and see if other retailers still have this part in stock
- Visiting online stores such as eBay and finding sellers that have this part
- Trying retailers and repair stores in your local area to see if they have the part in their inventory
- Talking to a local repair technician, who may have the part you need, or may be able to repair your existing part
- Reaching out to the manufacturer of your product to see what their recommendations are for replacing this part
