Product Information
Description:
| Genuine Porter Cable replacement part, this item i sold individually. This part acts as a seal and a spacing collar for the nail guns listed below. This is a neoprene part and it has a tendency to deteriorate. It may be a good idea to check on the condition of this part periodically. |
Frequently Purchased With
Compatibility
This part is compatible with the following machines:
Products Compatibility
This item works with the following types of products:
- • Nailer
Questions & Answers for Collar
How do you attach the collar
Arnie
asked on 2022-12-07
Hello Arnie, Thank you for the question. Here is a repair story from a previous customer that may help. "Unscrew 4 allen screws from top cap of gun. Be careful on pulling top off - keep all parts in order. The old collar was cracked. Gently pry off old collar (semi-hard plastic), make sure new collar is oiled well. Snap on new collar. Put the top back on and tighten screws." We hope this helps!
eReplacementParts Team December 07, 2022
Can you give me the dimensions of the collar please?
Rob
asked on 2022-10-01
Hello Rob, thank you for your question. The dimensions is approximately 3". On our site, there is a grid behind the part that is mapped out in 1" squares for approximation of measurement. We hope this helps.
eReplacementParts Team October 01, 2022
Repair Instructions: Submitted by Customers Like You
50 of 52 people found this instruction helpful
Tool Type:
Nailer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, allen wrench
Old collar was broken
Remove the top cover from the nail gun. The collar was broken so I pulled it off and cleaned up the pieces that had broken off of it. Put the new collar on the cylinder. Replace the top cover.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
35 of 35 people found this instruction helpful
Tool Type:
Nailer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Allen wrenches
Air coming out of the exhaust port when connected to air hose without touching anything.
Removed the head to investigate. Observed damage to collar. Reviewed the diagram on website. Done deal. Have used this site a couple of times. Works awesome.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
17 of 18 people found this instruction helpful
Tool Type:
Nailer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
, allen wrench
Porter Cable framer not firing and blowing air out back
Unscrew 4 allen screws from top cap of gun. Be careful on pulling top off - keep all parts in order. The old collar was cracked. Gently pry off old collar (semi-hard plastic), make sure new collar is oiled well. Snap on new collar. Put the top back on and tighten screws.
very important to drop 2-4 drops of air tool oil in the air chuck before EVERY use - it really helps in longevity of the gun.
very important to drop 2-4 drops of air tool oil in the air chuck before EVERY use - it really helps in longevity of the gun.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
11 of 12 people found this instruction helpful
Tool Type:
Nailer
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Allen wrench
Both the collar and piston stop were crack and pieces broken off, allowing air to leak out. There for the nail gun would not operate.
This was an easy repair, you should down load the parts diagram on ereplacementparts web site, to ensure that all parts are replace in the correct order.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
7 of 8 people found this instruction helpful
Tool Type:
Nailer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Allen wrench
Collar was cracked and leaking air through the top
Removed the head. Removed the damaged collar replaced with new collar reassembled the head works like brand new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
5 of 5 people found this instruction helpful
Tool Type:
Nailer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, hex wrench
Air constantly comming through exhaust
Remove four hex bolts on cap of tool. Remove cap, replace pu collar and replace cap. Hex bolts are very tight and difficult to break loose.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
4 of 4 people found this instruction helpful
Tool Type:
Nailer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Allen wrenches
Air leaking inside unit
Removed four hex socket head bolts at the top of the nailer and pried the broken seal off, pushed the new one on and assembled the unit.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 3 people found this instruction helpful
Tool Type:
Nailer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Hex Tool
Air was leaking from the top of the gun.
Remove 4 large hex nuts at the top of gun and simply pull out old collar and replace it with the new one. Make sure you lightly re-oil the gun before use!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Nailer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Wrench Set
Nail gun leaking air from the top.
Took the top off and put the new part in. Put the top back on. Nail gun works now.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Nailer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Leaked air
Remove top with 4 screws and replace collar then reinstalled. Worked perfectly
Did you find this story helpful?
Thanks for voting and helping fellow customers!
show more
Reviews
42 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
35
4 stars
7
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
- 2
- 3
Perfect Repair
Quick delivery.Best of all the helpful hints on possible repair solutions lead me to the correct replacement part I needed.
Guest -
10 days ago
Verified Purchase
Easy repair
The part was easy to identify with the images provided. Purchasing was painless. Shipping was confusing, never knew when it would arrive. The tracking system is faulty.
Guest -
September 11, 2023
Verified Purchase
YouTube video said this should be the part that broke inside my nail gun.
The gasket came in great time, took the nail gun apart and installed the new part. It works as good as new. Saved me purchasing a new gun and it was at a fraction of the cost, couldn't be happier.
Guest -
August 31, 2023
Verified Purchase
Direct fit, timely delivery
Finding parts on this site is very simple. This part was a breeze, because the actual owners manual is uploaded making getting the exact part a guarantee. I have never had an issue ordering from here.
Tim -
November 21, 2022
Verified Purchase
Great prompt service and easily repaired.
Part arrived in like new condition
Guest -
March 14, 2022
Verified Purchase
Easy repair
This collar was the exact fit and was easy to replace. The videos and numbered parts list make it easy to order and repair.
Guest -
October 23, 2021
Verified Purchase
East repair
Par dit petfevt
Guest -
September 22, 2021
Verified Purchase
Easy repair
Arrived quickly and my nail gun works as new again
Ronaldo -
August 30, 2021
Verified Purchase
Exactly what I needed. Easily replaced the parr
It was easy to identify what I needed and yall shipped it right out to me. I replaced the part and it fixed it.
Guest -
August 8, 2021
Verified Purchase
Repair
Great service very easy to find on the website. Delivery was very fast.
Guest -
June 4, 2021
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
- 2
- 3
Product Information
