eReplacementParts.com
877-346-4814
Porter Cable Parts

Collar 910767

OEM part for: Porter Cable

Part Number: 910767


Install
Videos!
Grid squares measure 1x1 inch
In Stock
Order within the next 10 hours and your part ships today!
Easy Less than 15 minutes (79 rated repairs)?
OEM: Original Equipment Manufacturer ?
Porter Cable
Does this d-block d-md-none fit my product?

Product Description ?

Genuine Porter Cable replacement part, this item i sold individually.
This part acts as a seal and a spacing collar for the nail guns listed below.
This is a neoprene part and it has a tendency to deteriorate.
It may be a good idea to check on the condition of this part periodically.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Shipping: Ships Worldwide

Compatibility

This part will fit the following 6 machines

Porter Cable

FC350A Type 1 Clipped Head Framing Nailer View Diagrams & Manuals
FC350A Type 2 Clipped Head Framing Nailer View Diagrams & Manuals
FM350A Clipped Head Framing Nailer View Diagrams & Manuals
FR350A Round Head Framing Nailer View Diagrams & Manuals
FM350A (Type 1) Framing Nailer Power Tool View Diagrams & Manuals
FR350A (Type 1) 3-1/2in Rh Framer Power Tool View Diagrams & Manuals
Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Nailer Parts

Customer Part Reviews ?

4.8
Average Rating (out of 5):
41 Reviews
Click to filter by ratings:
5 stars
34
4 stars
7
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
  • 2
  • 3
NEXT >
  • Easy repair
    The part was easy to identify with the images provided. Purchasing was painless. Shipping was confusing, never knew when it would arrive. The tracking system is faulty.
    Guest - September 11, 2023 Verified Purchase
    YouTube video said this should be the part that broke inside my nail gun.
    The gasket came in great time, took the nail gun apart and installed the new part. It works as good as new. Saved me purchasing a new gun and it was at a fraction of the cost, couldn't be happier.
    Guest - August 31, 2023 Verified Purchase
    Direct fit, timely delivery
    Finding parts on this site is very simple. This part was a breeze, because the actual owners manual is uploaded making getting the exact part a guarantee. I have never had an issue ordering from here.
    Tim - November 21, 2022 Verified Purchase
    Great prompt service and easily repaired.
    Part arrived in like new condition
    Guest - March 14, 2022 Verified Purchase
    Easy repair
    This collar was the exact fit and was easy to replace. The videos and numbered parts list make it easy to order and repair.
    Guest - October 23, 2021 Verified Purchase
    East repair
    Par dit petfevt
    Guest - September 22, 2021 Verified Purchase
    Easy repair
    Arrived quickly and my nail gun works as new again
    Ronaldo - August 30, 2021 Verified Purchase
    Exactly what I needed. Easily replaced the parr
    It was easy to identify what I needed and yall shipped it right out to me. I replaced the part and it fixed it.
    Guest - August 8, 2021 Verified Purchase
    Repair
    Great service very easy to find on the website. Delivery was very fast.
    Guest - June 4, 2021 Verified Purchase
    Quick and easy, fit perfectly!
    The collar fit perfectly, and the nail gun immediately stopped leaking air, and dry fired perfectly.
    Guest - May 17, 2021 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Collar


    How do you attach the collar
    Arnie asked on 2022-12-07
    Hello Arnie, Thank you for the question. Here is a repair story from a previous customer that may help. "Unscrew 4 allen screws from top cap of gun. Be careful on pulling top off - keep all parts in order. The old collar was cracked. Gently pry off old collar (semi-hard plastic), make sure new collar is oiled well. Snap on new collar. Put the top back on and tighten screws." We hope this helps!
    eReplacementParts Team December 07, 2022
    Can you give me the dimensions of the collar please?
    Rob asked on 2022-10-01
    Hello Rob, thank you for your question. The dimensions is approximately 3". On our site, there is a grid behind the part that is mapped out in 1" squares for approximation of measurement. We hope this helps.
    eReplacementParts Team October 01, 2022

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy Less than 15 minutes (79 rated repairs)?

    Old collar was broken

    michael - November 13, 2015
    👍 49 of 51 people found this instruction helpful
    Tool Type

    Nailer

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    , allen wrench

    Remove the top cover from the nail gun. The collar was broken so I pulled it off and cleaned up the pieces that had broken off of it. Put the new collar on the cylinder. Replace the top cover.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Air coming out of the exhaust port when connected to air hose without touching anything.

    David - December 20, 2015
    👍 34 of 34 people found this instruction helpful
    Tool Type

    Nailer

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, Allen wrenches

    Removed the head to investigate. Observed damage to collar. Reviewed the diagram on website. Done deal. Have used this site a couple of times. Works awesome.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Porter Cable framer not firing and blowing air out back

    richard - June 5, 2016
    👍 17 of 18 people found this instruction helpful
    Tool Type

    Nailer

    Difficulty

    Easy

    Time

    30-60 minutes

    Tools Used

    , allen wrench

    Unscrew 4 allen screws from top cap of gun. Be careful on pulling top off - keep all parts in order. The old collar was cracked. Gently pry off old collar (semi-hard plastic), make sure new collar is oiled well. Snap on new collar. Put the top back on and tighten screws.
    very important to drop 2-4 drops of air tool oil in the air chuck before EVERY use - it really helps in longevity of the gun.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Both the collar and piston stop were crack and pieces broken off, allowing air to leak out. There for the nail gun would not operate.

    Danny - January 8, 2016
    👍 11 of 12 people found this instruction helpful
    Tool Type

    Nailer

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    , Allen wrench

    This was an easy repair, you should down load the parts diagram on ereplacementparts web site, to ensure that all parts are replace in the correct order.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Collar was cracked and leaking air through the top

    Donald - June 21, 2016
    👍 7 of 8 people found this instruction helpful
    Tool Type

    Nailer

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    , Allen wrench

    Removed the head. Removed the damaged collar replaced with new collar reassembled the head works like brand new.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Air constantly comming through exhaust

    Perry - April 22, 2016
    👍 5 of 5 people found this instruction helpful
    Tool Type

    Nailer

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    , hex wrench

    Remove four hex bolts on cap of tool. Remove cap, replace pu collar and replace cap. Hex bolts are very tight and difficult to break loose.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Air leaking inside unit

    Rob - June 17, 2016
    👍 4 of 4 people found this instruction helpful
    Tool Type

    Nailer

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, Allen wrenches

    Removed four hex socket head bolts at the top of the nailer and pried the broken seal off, pushed the new one on and assembled the unit.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Air was leaking from the top of the gun.

    Matt - June 7, 2016
    👍 3 of 3 people found this instruction helpful
    Tool Type

    Nailer

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    , Hex Tool

    Remove 4 large hex nuts at the top of gun and simply pull out old collar and replace it with the new one. Make sure you lightly re-oil the gun before use!
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Nail gun leaking air from the top.

    Marsden - October 25, 2017
    👍 2 of 2 people found this instruction helpful
    Tool Type

    Nailer

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Wrench Set

    Took the top off and put the new part in. Put the top back on. Nail gun works now.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Leaked air

    james - December 6, 2016
    👍 2 of 2 people found this instruction helpful
    Tool Type

    Nailer

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Remove top with 4 screws and replace collar then reinstalled. Worked perfectly
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal