Easy
15-30 minutes
It is an authentic OEM item which is made for use with Ridgid coil roofing nailers. The collar is utilized to provide an air-tight seal for the top cap. Unfortunately, over time it may wear out and begin to crack eventually requiring a replacement to ensure your tool operates properly. Make sure to refer to the appropriate diagrams of your model for the correct installation. It is a high-quality collar which is made of durable rubber material and is sold as an individual component. You will need a wrench set to take the tool apart and replace this part.
Collar 079006001014
OEM part for: Ridgid
Part Number: 079006001014
$5.19
In Stock
Order within the next 6 hours and your part ships today! 
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 2 machines
Ridgid
R175RNA Coil Roofing Nailer View Diagrams & Manuals
R175RND Coil Roofing Nailer View Diagrams & Manuals
This item works with the following types of products:
- Nailer Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
5
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Responsive and easy to do business with
Excellent service
Guest -
July 20, 2023
Verified Purchase
Great parts
Work perfectly and get to me on time
Guest -
May 4, 2022
Verified Purchase
Easy repair
The part was for a roofing nailer. The old seal was completely destroyed. The website made it easy to figure out what seal it was. Even though I thought it was a different seal. But the website said a different seal was mostly replaced. And I went with it. They were right. I would of ordered the wrong one. I will be buying more replacement parts as I need them from here..
Guest -
June 22, 2020
Verified Purchase
First time ordering from you guys everything went smoothly, your website is easy to use.
First time ordering from you guys everything went smoothly, your website is easy to use.
Guest -
March 8, 2020
Verified Purchase
Works
Arrived fast and was the right part
Guest -
August 15, 2019
Verified Purchase
When the part finally arrived, it was what I was looking for.
The part was in new condition.
Guest -
June 5, 2021
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Collar
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Air started blowing through the gun.
Cristian - July 23, 2017
👍 3 of 3 people found this instruction helpful
Tool Type
Nailer
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Allen Wrenches
Parts Used
Took apart the top. Replaced the collar. Reassembled.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Leak from top of nailer
Stephen - December 19, 2016
👍 3 of 3 people found this instruction helpful
Tool Type
Nailer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Allen wrench set
Parts Used
Removed allen screws from top of nailer, lifted of cap and spring replaced collar, reinstalled spring and cap. Simple repair less than 15 minutes.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Piston ring worn, and collar ripped
michael - February 3, 2018
👍 1 of 1 people found this instruction helpful
Tool Type
Nailer
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Allen wrench
Parts Used
1. Remove 4 allen head screws from top
2. Remove ripped collar
3. Push up piston remove old worn piston ring replace with new with slight lube oil on it
4. Pop collar new collar back on
5. Replace top and tighten 4 allen screws
2. Remove ripped collar
3. Push up piston remove old worn piston ring replace with new with slight lube oil on it
4. Pop collar new collar back on
5. Replace top and tighten 4 allen screws
Did you find this story helpful?
Thanks for voting and helping fellow customers!
head leaking
bill - November 1, 2021
Tool Type
Nailer
Difficulty
Easy
Time
15-30 minutes
Tools Used
, allen wrench
removed head 4 allen screws
removed seals and replaced with new
found broken collar ring replaced it resembled
head tested ok
if your head is leaking dont be afraid to tackle its simple fix
removed seals and replaced with new
found broken collar ring replaced it resembled
head tested ok
if your head is leaking dont be afraid to tackle its simple fix
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Leaking air at exhaust
Antonio - July 6, 2021
Tool Type
Nailer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Hex allen wrench
Parts Used
Te mlm ove four screw by exhaust, replaced damaged part and put everything back together
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Nails would not feed.
Mark - July 22, 2020
Tool Type
Nailer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Hex wrench
Parts Used
1. Removed 4 Allen screws from Cap.
2. Removed Cap.
3. Removed Cylinder Press Ring.
4. Removed damaged Collar.
5. Installed new Collar by snapping in place.
6. Installed Cylinder Press Ring removed in step 3.
7. Installed Cap.
8. Installed & tightened 4 Allen screws.
2. Removed Cap.
3. Removed Cylinder Press Ring.
4. Removed damaged Collar.
5. Installed new Collar by snapping in place.
6. Installed Cylinder Press Ring removed in step 3.
7. Installed Cap.
8. Installed & tightened 4 Allen screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
