866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Lawn Equipment Parts  Ryobi Parts  532175067 Clutch Cable Kit 42

Clutch Cable Kit 42

Part Number: 532175067
HusqvarnaRyobiPoulanWeed Eater
Availability: 25+ in stock
Price: $33.05
Quantity:
Order within the next 5 hours
and your part ships today!

*This part replaces obsolete part #: 169676, 175067 and 532169676.

Description:
This is an authentic manufacturer sourced replacement part used on lawn mowers/tractors. It connects the mower engagement lever to the idler arm on the mower deck and allows you to engage and disengage the blades. Includes bold and the zip tie.

You may need Pliers to complete this repair.

• Remove the cable end from the control head and install the new one
• Now you can run the new cable down to the control handle
• Attach the other end of the cable
• Tie the cable in place just as the old one was, but leave enough clearance and free play to avoid over-bending and breaking the new cable
Product Information
Manufacturer: Husqvarna, Ryobi, Poulan, Weed Eater
Product Number: 532175067
Classification: Part
Weight: 0.61 lbs.
Shipping: Ships Worldwide
Compatibility

This part is compatible with the following machines:

Ryobi
Husqvarna
Poulan
Weed Eater

Products Compatibility

This item works with the following types of products:

  • • Lawn Mower
  • • Lawn Tractor
Questions & Answers

What is the conduit length on this cable?
Bryan for model number PR1842ST
Hello Bryan, thank you for your inquiry! We have found that the dimensions are as follows: Cable Length: 45" Conduit Length: 32" I hope this information helps!
Repair Instructions: Submitted by Customers Like You
19 of 20 people found this instruction helpful
Tool Type:
Lawn Tractor
Parts Used:
Clutch Cable Kit 42 - 532175067
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Cable broke from being rusty in the exposed area near the blades
So instead of removing all covering pieces to the lawnmower head, I just used a long screw driver and Needle nose to remove the existing cable. I started from the bottom attaching it to the pulley and mount with the existing pins just above the blades housing and then followed the exiting cable up so you know the path that it needs to follow. I have to admit there is a hole it has to go through in the frame just before it reaches the lever that's a little tricky but won't take much time at all. After its through the hole, here's where you attached it to the lever, then attach it to the mount just below the lever.

Again not to bad, should take about 20 min with no removal of coverings. Add about 15 min to remove app plates and coverings, but remember where everything goes. Its more tricky.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
5 of 6 people found this instruction helpful
Tool Type:
Lawn Tractor
Parts Used:
Clutch Cable Kit 42 - 532175067
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Clutch cable broke
The clutch cable kit includes installation instructions, which were a great help.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 4 people found this instruction helpful
Tool Type:
Lawn Tractor
Parts Used:
Clutch Cable Kit 42 - 532175067
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Pliers
Mower clutch cable broke.
Removed the old cable from the old pulley and the control handle. Simply installed the new one. Very easy fix.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
4 of 6 people found this instruction helpful
Tool Type:
Lawn Tractor
Parts Used:
V-Belt - 532144959
Clutch Cable Kit 42 - 532175067
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver
Mower deck blades stopped turning-replaced clutch cable and v-belt
Disconnected cable-drop mower deck-replace nut and bolt-new cable-replace v-belt
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Lawn Tractor
Parts Used:
Clutch Cable Kit 42 - 532175067
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Pliers, Socket set
Clutch cable broke
1 Lowered one side of the deck
2 Removed gas tank
3 Removed old cable
4 Put new cable in following same routing as old cable
5 Put deck back up
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Tractor
Parts Used:
Clutch Cable Kit 42 - 532175067
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Pliers, Socket set
Cable for blade engagement broke
Remove steering wheel, dash panel to access cable connection
Route new cable thru frame, attach with zip tie provided
Connect spring end of cable to idler pulley on mower deck
Reattach dash panel/steering wheel
Cut grass
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Tractor
Parts Used:
Clutch Cable Kit 42 - 532175067
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Pliers, Socket set, None
Cable broke
Installed new cable
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Tractor
Parts Used:
Clutch Cable Kit 42 - 532175067
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Wrench Set, Adjustable Wrench
Blades would not engage
Put the new part on
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 2 people found this instruction helpful
Tool Type:
Lawn Tractor
Parts Used:
Clutch Cable Kit 42 - 532175067
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Mower deck blade engagement cable worn
I followed the instructions the came with the part.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 2 people found this instruction helpful
Tool Type:
Lawn Tractor
Parts Used:
Clutch Cable Kit 42 - 532175067
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers
Blade clutch cable broke
Followed the installation instructions included with the cable. Made it easier.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
visa mastercard discover american express PayPal
HACKER SAFE certified sites prevent over 99.9% of hacker crime.

fancyboxy