Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST

Click Pin

Part Number: BNT2122
Availability: 25+ in stock
Price: $0.99
Order within the next 8 hours
and your part ships today!

*This part replaces obsolete part #: and TGT1274.

This authentic component is an OEM part which is designed for Shimano fishing reels. It is an important part of the drag mechanism that applies tension on the line preventing it from reeling out too fast. This is an identical replacement for a damaged or a faulty hardware that was installed on a new unit. One durable metal click pin is included. Check the diagrams of your model for the exact location and the correct installation of this component. Replacing it will require a screwdriver in order to remove and reattach the side cover. Note, other parts of the drag mechanism are all sold separately.
Product Information
Manufacturer: Shimano
Product Number: BNT2122
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Related Products

This part is compatible with the following machines:

CH-101BPV Chronarch Low-Profile Baitcasting Reel
CH-101BSV Chronarch Low-Profile Baitcasting Reel
CI200D Citica Low-Profile Baitcasting Reel
CI-201D Citica Low-Profile Baitcasting Reel
CL100A Citica Low-Profile Baitcasting Reel
CL200 Citica Low-Profile Baitcasting Reel
CL200APV Citica Low-Profile Baitcasting Reel
CL200Mg-5 Citica Low-Profile Baitcasting Reel
CRX-200 Cruxis Low-Profile Baitcasting Reel
CRX-201 Cruxis Low-Profile Baitcasting Reel
CU-50E Curado Low-Profile Baitcasting Reel
CU-51E Curado Low-Profile Baitcasting Reel
CU100B Curado Low-Profile Baitcasting Reel
CU-100DSV Curado Low-Profile Baitcasting Reel
CU-101B Curado Low-Profile Baitcasting Reel
CU-101D Curado Low-Profile Baitcasting Reel
CU-200DHSV Curado Low-Profile Baitcasting Reel
CU-200DPV Curado Low-Profile Baitcasting Reel
CU-200E5 Curado Low-Profile Baitcasting Reel
CU-200E7 Curado Low-Profile Baitcasting Reel
CU-201DHSV Curado Low-Profile Baitcasting Reel
CU-201DPV Curado Low-Profile Baitcasting Reel
CU-201E7 Curado Low-Profile Baitcasting Reel
CU-300DSV Curado Low-Profile Baitcasting Reel
CH50MG Low-Profile Baitcasting Chronarch MG
CH51MG Low-Profile Baitcasting Chronarch MG
CH101D7 Low-Profile Baitcasting Chronarch MG
CH101B Low-Profile Baitcasting Chronarch MG
CH100D5 Low-Profile Baitcasting Chronarch MG
CH100D7 Low-Profile Baitcasting Chronarch MG
CI100DSV Low-Profile Baitcasting Citica
CI200DPV Low-Profile Baitcasting Citica
CI200DSV Low-Profile Baitcasting Citica
CI201E Low-Profile Baitcasting Citica
CI200E Low-Profile Baitcasting Citica
CORE100MGFV Low-Profile Baitcasting Core
CT200D Round Baitcasting Calcutta D
CT300D Round Baitcasting Calcutta D
CT400D Round Baitcasting Calcutta D
CU201G6 Low-Profile Baitcasting Curado
TN12A Star Drag Reel Trinidad A
TN16DC Conventional Reel Trinidad DC
TN20DC Conventional Reel Trinidad DC
TN30DC Conventional Reel Trinidad DC
TN16NA Drag Reel Trinidad A

Products Compatibility

This item works with the following types of products:

  • • Reel
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Parts Used:
Click Pin - BNT2122
Click Spring - BNT4931
Handle Assembly - BNT3356
Handle Retainer - BNT3906
Cast Control Spacer - TGT0277
Repair Difficulty:
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers
This reel is about 13 years old, so the handle & the drag click needed to be replaced.
I took the reel apart & cleaned, oiled & greased it. I installed the new parts when I reassembled the reel. It now works like new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Was missing parts on 2 reels.
On the Shimano Curado 200DHSV
1. Pulled handled nut
2. Removed handle and star drag & nut plus washers.
3. Removed the 4 Right side plate screws & removed plate.
5. Installed Yoke springs .
6. Slid Right side plate back on & tightened the 4 screws.
7. Installed washers correctly , then drag nut, then star drag.
8. Carefully set click pin and spring in the hole on star drag.
9. Installed click plate then new handle and nut then retainer.
10. Inspected and completed the Curado 200DHSV
On the Curado 200BSF
1.Put spool tensioner spring on and then tensioner.
2. Installed handle knob on handle - complete.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Parts Used:
Click Pin - BNT2122
Click Spring - BNT4931
Click Plate Retainer - BNT2120
Star Drag Click - BNT2121
Star Drag Spring - BNT2125
Star Drag - BNT3809
Drive Shaft - BNT3817
Repair Difficulty:
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, Socket set
Drive Shaft deterioated from use while fishing in saltwater
Started with driveshaft. Removed retainer, replaced bearing and washer. Cleaned and reversed process. Installed the driveshaft and lightly greased half the gear and secured the shaft to frame.
Installed clicker spring and pin, star drag cover and retainer.
Finished off by installing drag spring, star drag and remaining parts and securing with handle, nut, and protective cover.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion for Click Pin - ( BNT2122 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
visa mastercard discover american express PayPal
HACKER SAFE certified sites prevent over 99.9% of hacker crime.