Easy
15-30 minutes
This replacement clamshell set is specially designed for use with Dewalt drills. It is an authentic item that is sourced directly from original equipment manufacturer. This set contains both the left and the right sides of the housing, please note the hardware that hold the clamshell together is sold separately. This clamshell set is made from durable plastic and it is sold individually.
Clamshell Set 652045-00
OEM part for: DeWALT
Part Number: 652045-00
$21.69
In Stock
Ships within 1 business day 
Compatibility
This part will fit the following 8 machines
DeWALT
DW960 Type 1 Right Angle Cordless Drill View Diagrams & Manuals
DW960 Type 2 Right Angle Cordless Drill View Diagrams & Manuals
DW960P Type 2 Electric Drill View Diagrams & Manuals
DW960W Type 1 Drill View Diagrams & Manuals
DW960K-2 Type 1 18V Drill View Diagrams & Manuals
DW960K-2 Type 2 18V Drill View Diagrams & Manuals
DW960K Type 2 18V Drill View Diagrams & Manuals
DW960B (Type 2) Right Angle Drill Power Tool View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Cordless Drill Parts
- Drill Parts
- Electric Drill Parts
This part replaces obsolete part #: 383841-11
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Clamshell Set
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Clam shell
dennis - November 18, 2020
Tool Type
Cordless Drill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Just replaced the clamshell
Did you find this story helpful?
Thanks for voting and helping fellow customers!
I dropped the Dewalt angle drill, broke the case.
Bill - December 19, 2019
Tool Type
Cordless Drill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Star bit
Parts Used
Removed the 6 screws.
Separate case.
Snap a pic.
Remove innards.
Replace innards into new case.
Close up case and insert screws.
Done.
Separate case.
Snap a pic.
Remove innards.
Replace innards into new case.
Close up case and insert screws.
Done.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
driver case was shatered,
jim - December 15, 2018
Tool Type
Cordless Drill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
it was easy, removed screws(small star tip) pulled guts of driver out of old case and inserted into new case, installed screws... done.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Broken Clamshell
Robert - August 24, 2017
Tool Type
Cordless Drill
Difficulty
Hard
Time
1-2 hours
Tools Used
, Torx wrench and dental tool with hook
Parts Used
The wires coming off the forward/reverse switch are tricky to get right or the switch will bind and not operate properly. There are slots, very hard to see, in each side of the clamshell that the switch wires MUST run through. Just putting the two halves together does not do it. I needed to use a little hooked dental tool to go in through the battery opening to work the wires into the grooves/slots to get the shells to close straight enough for the switch to not bind. If you can look up their before you take the old one off you can see what I mean.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Broken housing
larry - May 15, 2016
Tool Type
Cordless Drill
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Remove the battery
Remove the screws from the housing
Separate housing trying to keep all the parts in one side
Take a picture to show where all the parts go
Transfer the parts from the old housing to the new housing
Make sure the parts are in their correct spot
Put the new housing together
Remove the screws from the housing
Separate housing trying to keep all the parts in one side
Take a picture to show where all the parts go
Transfer the parts from the old housing to the new housing
Make sure the parts are in their correct spot
Put the new housing together
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Housing broken, Screws rusty, switch paddle gummy
Stephen - May 9, 2016
Tool Type
Cordless Drill
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Torx screwdriver to be specific
Removed one half of assy. housing, cleaned that side of motor and installed that side of the housing. The removed other broken half and cleaned that side of motor. Installed other side of housing and paddle assy. Put new screws in and attached label. Ops. checked ok.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Broken case
albert - February 9, 2016
Tool Type
Cordless Drill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, torx screwdriver
Parts Used
Start by removing the screw that connect the two housing halves together. Remove one housing half. Take a pictures of all the parts in their place. Carefully remove the internal parts of the drill into one of the new handle halves. Revering back to the pictures. Once you have the parts in the new housing half. Assemble both halves together, and make sure it is a proper fit. Install the screws. Then test the drill.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Dropped Dewalt Angle Drill 18volt and case broke
Gerald - December 10, 2015
Tool Type
Cordless Drill
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Torx screwdriver
Parts Used
Very easy to replace, 5 screws and case came apart. Take a picture of where the internal parts are located. Remove internal parts and put in new case. Reinstall 5 screws and your done.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Dropped on concrete too many times and base had cracked and broken.
Brian - December 1, 2015
Tool Type
Cordless Drill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, torx driver
Parts Used
Remove battery and all screws, remove that half, install new half, turn over and repeat. Make sure both sides are fully connected, ensure drill works, install screws and done.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
