Easy
Less than 15 minutes
This is a genuine OEM pre-filter designed for use with Bissell upright vacuums. This filter is located inside of the bottom of the dirt cup. Check the inner and outer circular filters in the filter cup, as well as the pre-motor filter at least once per month and clean or replace as needed. This assembly consists of one (1) pleased paper filter and one (1) foam filter.
Circular Filters B-203-7593
OEM part for: Bissell
Part Number: B-203-7593
$14.28
In Stock
Order within the next 1 hour and your part ships today! 
Compatibility
This part will fit the following 1 machine
Bissell
23T7 Easy Vac Upright Vacuum View Diagrams & Manuals
This item works with the following types of products:
- Vacuum Parts
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Circular Filters
Is part compatible for model #6579-2.
Patrick
for model number 6579-2
asked on 2023-03-16
Hello Patrick, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number: B-203-1464. We hope this helps, good luck with the repair!
eReplacementParts Team March 16, 2023
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Air Filter needed to be replaced
Manuel - October 7, 2016
👍 4 of 4 people found this instruction helpful
Tool Type
Vacuum
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Parts Used
Remove the dirt cup and removed the filter , place the new filter in and replace the dirt cup.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Just needed new filters.
Patricia - October 10, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Vacuum
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Parts Used
Took out the old filters and secured the new ones.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Vacuum wheels kept falling off
Philip - December 22, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Vacuum
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Removed the old wheels and snapped the new ones right on
Removed the bottom of the vacuum, removed the the brush roll & old belt, and installed the new one, by placing it around the motor and the end of the brush roll, then pulling the brush roll back into its brackets.
Installed the bottom of the vacuum
Removed the dirt cup and replaced the filter
Removed the bottom of the vacuum, removed the the brush roll & old belt, and installed the new one, by placing it around the motor and the end of the brush roll, then pulling the brush roll back into its brackets.
Installed the bottom of the vacuum
Removed the dirt cup and replaced the filter
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Needed a new filter !!!
William - August 29, 2019
Tool Type
Vacuum
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, No tools
Parts Used
Opened the vacuum catch, removed bottom section to get to filter, removed old and replaced with new !!!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Two of the same type of Mini Canister Vacuums from Bissell with broken roller floor bars
Barb - April 6, 2017
Tool Type
Vacuum
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver
I removed the roller bars from both machines and also replaced the filters. One vacuum had a broken Nozzle/ squeegee/front wheel. I also replaced that. These vacuums are older models but I love them. One was an Easy Clean and one was a Pro model but the parts interchange. I am so happy I fixed both of them myself and I think your website is fabulous! Thanks so much!
Sincerely,
Barb H.
PS Just used a screw driver to remove the old parts.
Sincerely,
Barb H.
PS Just used a screw driver to remove the old parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Vacuum filter
David - February 2, 2017
Tool Type
Vacuum
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, none
Parts Used
Took old filter out put new filter in.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Wheels kept falling off
Gary - October 8, 2016
Tool Type
Vacuum
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Removed old wheels
Snapped in new ones
Changed Filter
Ready to go in less that 5 minutes
Snapped in new ones
Changed Filter
Ready to go in less that 5 minutes
Did you find this story helpful?
Thanks for voting and helping fellow customers!
No suction
Gwenlyn - September 5, 2016
Tool Type
Vacuum
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Just hand replacement
Parts Used
Rwmoved old filter, replaced with purchased one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Clogged filter
Richard - July 19, 2016
Tool Type
Vacuum
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Parts Used
Cleaned the canister and installed the new filter
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
