This is an authentic item which is supplied directly from the original equipment manufacturer for use with Porter Cable nailers and staplers. It is an identical replacement for a missing or a faulty check seal that was installed on a new unit. The purpose of this component is to provide a tight seal for the cylinder, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality check seal is made of durable rubber and is sold individually.
Check Seal 886119
OEM part for: Porter Cable
Part Number: 886119
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 11 machines
Porter Cable
This item works with the following types of products:
- Nailer Parts
- Stapler Parts
Repair Videos ?
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Check Seal
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Worn out seals and busted piston bumper
Tool Type
Nailer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Allen wrench
Internal parts broke
Tool Type
Stapler
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Everything went smooth from finding the parts, too ordering the parts, to shipping and assembling the parts. Will use this company again and highly recommend them
Finish Nailer leaker air through the top vent
Tool Type
Nailer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Hex wrenches
Disassembly was fairly simple. The piston was stubborn to remove but a sharp rap on a wooden block did the trick. Checked all the parts for damage and found that the spring bumper was broken in several places. Ordered that part and replaced all the seals since the unit was apart. Recommend lubricating each seal and its mating part before reassembly. A good cleaning of the tool is also recommended along with oiling other areas with moving parts. Works great. Recommend about 80-85 psi when operating brad and finish nailers.
No return on striker
Tool Type
Nailer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Allen Wrench,pin punch,hammer
Parts Used
Remove piston & cylinder .....Pull out by hand
Remove and replace check seal
Reassemble
Piston would not return. Just blew air
Tool Type
Nailer
Difficulty
Medium
Time
15-30 minutes
Tools Used
, Allen wrench
Quit firing nails (used Driver Kit), trigger leaked air (used Trigger kit)
Tool Type
Nailer
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Wrench Set
Leaking air
Tool Type
Nailer
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Allen wrench
Parts Used
Installed the cylinder in the gun. Installed the top cap
Nailer not cycling.
Tool Type
Nailer
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Allen wrench
Parts Used
Seal was bad and air was excaping
Tool Type
Stapler
Difficulty
Easy
Time
30-60 minutes
Tools Used
Wrench Set
Nailer would not retract driver.
Tool Type
Nailer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Hex key set
Parts Used
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.