Chain Catcher C310000080
Part Number: C310000080
Order within the next 13 hours
and your part ships today!
and your part ships today!
*This part replaces obsolete part #: 22160-52511 and 22160-52510.
Product Information
Description:
| The chain catcher attaches to the crankcase. It is a genuine item that is supplied by the original equipment manufacturer for use with Shindaiwa saws. This part is made of hard rubber and is available individually. During the installation process, an allen wrench might be needed to replace this part. It will require replacing if it becomes broken. |
Compatibility
This part is compatible with the following machines:
the 15 compatible machines
Products Compatibility
This item works with the following types of products:
- • Chain Saw
- • Saw
Repair Guides
![]()
Articles:
|
Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225 trimmer....
May 27, 2015
|
Questions & Answers for Chain Catcher
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Chain Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Wrench Set, Nutdriver, T handle Allen wrenches
The saw was straight gassed
Pulled the muffler to check for cylinder damage . Pressure/Vac tested to exclude case ,and seal leakage . Removed and replaced P&C , intake boot, base gasket , and some minor parts .
Will run saw on 36-1 mix for a few tanks .
Will run saw on 36-1 mix for a few tanks .
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Chain Saw
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Socket set
chain saw motor mounts worn out
removed old motor mounts and replaced with new ones
old rubber mounts 10 years old just gave out afters many hours
of abuse, saw is now solid again, ready for many more hours
old rubber mounts 10 years old just gave out afters many hours
of abuse, saw is now solid again, ready for many more hours
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information
Repair Guides
![]()
Articles:
|
Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225 trimmer....
May 27, 2015
|
