Carryover Tube 80005592
Part Number: 80005592
Order within the next 12 hours
and your part ships today!
and your part ships today!
*This part replaces obsolete part #: 80006504.
Product Information
Description:
This is a genuine Char-Broil replacement part, it is sold individually. Carryover tubes connect the gas grill burners and carry the flame from one burner to the next. Over time, your carryover tubes may rust or warp. This would be the time to replace them. |
Frequently Purchased With
Compatibility
the 23 compatible machines
This part is compatible with the following machines:
Char-Broil
463248108 Commercial Series Grill
463248708 Infrared Commercial Series Grill
463260207 (2007) Gas Grill
463260707 (2007) Gas Grill
463260907 Premium Stainless Series Grill
463261106 Designer Series Stainless Grill
463261107 (2007) Gas Grill
463264407 (2007) Gas Grill
463268007 Commercial Series Four Burner Grill
463268008 Commercial Series Four Burner Grill
463268207 Commercial Series Grill
463268606 Commercial Series Grill
463248708 Infrared Commercial Series Grill
463260207 (2007) Gas Grill
463260707 (2007) Gas Grill
463260907 Premium Stainless Series Grill
463261106 Designer Series Stainless Grill
463261107 (2007) Gas Grill
463264407 (2007) Gas Grill
463268007 Commercial Series Four Burner Grill
463268008 Commercial Series Four Burner Grill
463268207 Commercial Series Grill
463268606 Commercial Series Grill
463268706 Commercial Series Grill
463268806 Commercial Series Grill
463269806 Front Avenue Series Grill
466248108 Commercial Series Grill
466268008 Commercial Series Grill
461262407 Thermos Gas Grill
461262006 Performance Series Gas Grill
463261508 Four-Burner Dual Fuel Grill w/Sideburner
461261508 Gas Grill
461271108 Gas Grill
466272108 Gas Grill
463268806 Commercial Series Grill
463269806 Front Avenue Series Grill
466248108 Commercial Series Grill
466268008 Commercial Series Grill
461262407 Thermos Gas Grill
461262006 Performance Series Gas Grill
463261508 Four-Burner Dual Fuel Grill w/Sideburner
461261508 Gas Grill
461271108 Gas Grill
466272108 Gas Grill
Repair Guides
Articles:
Having trouble getting your grill to light up? A common cause of this issue is a defective ignition switch. We'll sho...
November 08, 2012
|
Questions & Answers for Carryover Tube
I have a Char-Broil Performance 6 Burner Gas Grill, I need the cross over bars and my model number does not show up. Which cross over bars will I need. Also which burners will I need.Thanks in advance!
Tomas
for model number 463244819
asked on 2023-05-09
Hi Tomas, Thank you for writing. The Carry Over Tube is listed as Part Number: G552-0003-W1. The Burner Tubes are showing discontinued sorry. Our suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers and contact us back with the updated substitution number. We hope this helps!
eReplacementParts Team May 09, 2023
Can I still get crossover tubes for this model? Ordered a set but they were too long and not adjustable.
Michael
for model number 463275717
asked on 2023-03-22
Hello Michael, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number: G552-0003-W1. Thank you for the inquiry, good luck with the repair!
eReplacementParts Team March 22, 2023
Looking for burner tubes and crossover tubes please for this model
David
for model number 463342118
asked on 2023-03-14
Hello David, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number:G651-0068-W1 for the Carry Over Tube and Part Number:G470-5200-W1 for the Burner Tube. The tubes are sold individually.
eReplacementParts Team March 14, 2023
Looking for crossover tubes and burner tubes for model# 463276517 are these still available? Thank you
Jim
for model number 463276517
asked on 2023-01-04
Hello Jim, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number: G552-0003-W1 for the Carry over Tube and Part Number: G470-5200-W1 for the Burner Tube. We hope this helps!
eReplacementParts Team January 04, 2023
Carryover tube
Richard
for model number 463344015
asked on 2022-12-13
Hello Richard, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number:G651-0068-W1. Thank you for your inquiry, good luck with this repair!
eReplacementParts Team December 13, 2022
I need a carryover tube for a model 463376017, can you tell me correct part number for this grill part replacement
Zane
for model number 463377017
asked on 2022-11-25
Hello Zane, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number:G651-0068-W1. Thank you for your inquiry, good luck with this repair!
eReplacementParts Team November 25, 2022
Flame carryover approximately 5 and a quarter in.
Greg
for model number 463349917
asked on 2022-11-04
Hello Greg, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number: G651-0068-W1. Thank you for your inquiry, good luck with this repair!
eReplacementParts Team November 04, 2022
Where is the model number plate? I have a 4 burner with a side burner. Thank you, Richard
Richard
asked on 2022-07-20
Hello Rochard, Thank you for writing. The Model number is normally located on the base of the barbecue grill near the wheels. On the rear casting support bar located on the back of the barbecue grill just below the bottom casting or on the rear cabinet panel of the barbecue grill. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
eReplacementParts Team July 20, 2022
Will this crossover tube work on my grill
Andrew
for model number 463673517
asked on 2022-07-03
Hello Andrew, Thank you for your inquiry. We have researched the model number you have provided and do not show this part as compatible. The compatible part number is G432-001D-W1. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
eReplacementParts Team July 03, 2022
my crossover tubes have burned/rusted. I need 2 new crossover tubes. its a classic 3 burner grill. can I get new crossover tubes?
B
for model number 463742418
asked on 2022-03-27
Hello B, thank you for writing. The correct Carryover Tube is part G413-0004-W2. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
eReplacementParts Team March 27, 2022
Repair Instructions: Submitted by Customers Like You
19 of 22 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Power Drill, Hammer, rust remover
Parts were rusted out
The most difficult part was removing the old rusted out parts and screws. The screws were corroded so bad it was there wasn't really a place to insert the screwdriver. Using rust remover/ bolt loosener and needle nosed pliers, work solution down into screw grooves until screw spins freely. Remove screws but save them. Not all of the new screws fit in the existing holes. Be sure to remove the screws that attach the igniter from the igniter burner before trying to pull out the igniter burner (there are 2). After screws are removed parts easily pull out or lift off. New parts were not an exact fit but we're better quality and we're close enough to make it work. Attach the igniter back onto the new igniter burner before trying to attach anything else (reuse of old screw school was necessary here). Lay in all burners and carry over tubes, insert screws but do not tighten all the way. After everything aligns tighten each screw most but not all of the way. Then go back and tighten them all the way. Other wise it is difficult to align the last screw. Also, be sure all of the carry over tubes face the same and correct direction.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
8 of 9 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
inside parts rusted and unusable
Our barbecue hasn't worked for a while. I was reluctant to buy a new one, and decided to take the plunge and see if it were worth trying to rebuild the Char-Broil I had (now close to 10 years old). So I did the following:
1. Removed old parts.
2. Cleaned unit.
3. Got online and ordered new parts.
4. When parts arrived, got frustrated that I had ordered the wrong ones (hadn't checked the serial number).
5. Called eReplacement, who helped me figure out the right ones and facilitated the return.
6. Sulked.
7. New parts arrived and were installed within about 25 minutes.
8. Barbecued chicken and corn for dinner.
9. Did the happy dance!
1. Removed old parts.
2. Cleaned unit.
3. Got online and ordered new parts.
4. When parts arrived, got frustrated that I had ordered the wrong ones (hadn't checked the serial number).
5. Called eReplacement, who helped me figure out the right ones and facilitated the return.
6. Sulked.
7. New parts arrived and were installed within about 25 minutes.
8. Barbecued chicken and corn for dinner.
9. Did the happy dance!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
7 of 8 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Power Drill, Adjustable Wrench
Burners Worn Out
My Charbroil grill is over ten years old. I live in Michigan and use it year round. The burners and carryover tubes failed after years of use
I removed the rusted rivets that were (partially) holding the burners in place by drilling them out.
The new burners were installed and secured using stainless steel nuts & bolts.
The carry over tubes connected easily to the burners. The grease tray was installed without issue.
My grill now works like new and I do not have to spend $500+ for a new one!
I removed the rusted rivets that were (partially) holding the burners in place by drilling them out.
The new burners were installed and secured using stainless steel nuts & bolts.
The carry over tubes connected easily to the burners. The grease tray was installed without issue.
My grill now works like new and I do not have to spend $500+ for a new one!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
4 of 5 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Power Drill
Carryover tubes corroded.
Drilled out the screws holding the tubes in place, as they were so corroded they could not be unscrewed. Once that was done I was able to install the new ones without issue.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
4 of 5 people found this instruction helpful
Tool Type:
Outdoor Grill
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Flame tamer bars and carry over tubes rusted out
1. Removed flame tamer bars and discarded. No tools necessary
2. Removed crossover tubes. Screws were rusted. Used vice grip pliers on the head of screws to back them out. Burners were in good shape and did not needed to be replaced.
3. Parts were a perfect fit. Replacement cross over tubes were a perfect fit and came with new screws. No problems to install.
4. Flame tamer bars were drop in replacements.
5. Grill is ready for another 1000 burgers.
2. Removed crossover tubes. Screws were rusted. Used vice grip pliers on the head of screws to back them out. Burners were in good shape and did not needed to be replaced.
3. Parts were a perfect fit. Replacement cross over tubes were a perfect fit and came with new screws. No problems to install.
4. Flame tamer bars were drop in replacements.
5. Grill is ready for another 1000 burgers.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 4 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Good stainless steel grill with deteriorated burner tubes and flame tamers.
The parts were very easy to find on your site and were delivered 2 to 3 days earlier than the projected delivery date. All the parts were replaced in under 15 minutes using only phillips screwdriver and was back to grilling. I highly recommend using this site for you're parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 3 people found this instruction helpful
Tool Type:
Outdoor Grill
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers, Power Drill, No
Drill out some broken screws with power drill
Remove carryover screws and install new once. Some screws are broken and needed power drill to remove.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 2 people found this instruction helpful
Tool Type:
Outdoor Grill
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Pliers, Power Drill, Hacksaw, metal file, tap+die, blind rivets
Grill's burner tubes were old and corroded, needed to be replaced.
1. Assessed what needed replacement due to flameout (valve handle badly melted)
2. Assemble raw materials for rusted burner tube supports, and then reconstruct, paying careful attention to hole spacing and levels. Dismantle tube supports. Replace with rebuilt supports.
3. Install new burner tubes, carryover tubes, and flame tamers.
4. Test: satisfactory.
2. Assemble raw materials for rusted burner tube supports, and then reconstruct, paying careful attention to hole spacing and levels. Dismantle tube supports. Replace with rebuilt supports.
3. Install new burner tubes, carryover tubes, and flame tamers.
4. Test: satisfactory.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 2 people found this instruction helpful
Tool Type:
Outdoor Grill
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Worn out, 14 years of heavy use
Removed old parts and replaced, saved me from buying a new $300.00 grill for about $55.00.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 2 people found this instruction helpful
Tool Type:
Outdoor Grill
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver
Old burners, flame tamers and carry over tubes were in bad condition due to both fire damage and corrosion.
Removed old damaged parts and cleaned out grill box.
Installed new parts.
Parts ordered were a perfect fit for my grill. Thanks to Replacement Parts website which made it easy to find and order the right parts.
Installed new parts.
Parts ordered were a perfect fit for my grill. Thanks to Replacement Parts website which made it easy to find and order the right parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
show more
Reviews
15 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
8
4 stars
3
3 stars
0
2 stars
0
1 stars
4
< PREV
- 1
- 2
Temp sensor
They had the exact part I needed and there was no delay in shipment.
Anonymous -
May 10, 2022
Verified Purchase
Saved our grill
It took us a while to leave a review because we did not replace the faulty parts until six months later. We are happy to report it saved our grill and kept us from having to buy another grill during the busy holiday season.
Shannon -
December 5, 2021
Verified Purchase
Great Website, Had My Parts
I found the website easy to use! I needed two parts for different grills. You had them both while Charbroil didn't!!! Your website had great tool to verify the parts would fit my grills! It was very easy to order parts. The parts arrived very soon after I ordered them! Thanks so much!!!
Guest -
July 25, 2020
Verified Purchase
EASY REPAIR
THE PART CAME QUICKLY AND FIT PERFECTLY ON MY BARA B QUE
Guest -
September 20, 2019
Verified Purchase
Review
Quality replacement parts. Very fast delivery. Excellent service.
Guest -
July 30, 2019
Verified Purchase
Carryover Tube
Grill burners stopped igniting.... carryover tubes? Who knew these little suckers would rust out? EReplacement had the best description of what I needed at a fair price.
Guest -
July 26, 2019
Verified Purchase
perfect, no fuss replacement
The parts i ordered (gas crossover tubes) for my gas grill shipped quickly, fit perfectly, and even came with the screws needed. The parts were super easy to find and site eReplacementParts.com was easy to browse and navigate. my overall experience was excellent. Thank you ERP.com!
Guest -
July 1, 2019
Verified Purchase
The fit
They fit my grill like they came with it easy to install grill works perfectly. Will buy all my things from here from know on
Guest -
June 17, 2019
Verified Purchase
It works great
good replacement
Guest -
July 26, 2019
Verified Purchase
Everything went as I expected it to.
The part is working as I expected it to.
Guest -
June 29, 2019
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
- 2
Product Information
Repair Guides
Articles:
Having trouble getting your grill to light up? A common cause of this issue is a defective ignition switch. We'll sho...
November 08, 2012
|