*This part replaces obsolete part #: 62100-81210.
Product Information
Description:
This replacement gasket is a genuine manufacturer-approved part that is specially designed for use with Shindaiwa and Echo lawn and garden equipment. Its purpose is to provide an air-tight seal for the carburetor, over time the material may become brittle and crack eventually requiring a replacement. Please make sure to check appropriate diagrams of your model for correct location and use of this item. This gasket is made of high-quality composite material and it is sold individually. |
Frequently Purchased With
Compatibility
the 16 compatible machines
This part is compatible with the following machines:
Shindaiwa
AH242 Hedge Trimmer
AH242 Hedge Trimmer
AHS242 Articulated Hedge Trimmer
AHS242 Articulated Hedge Trimmer
C242 Brushcutter
81742 Multipurpose Tool Carrier
F222 EPA2 Trimmer
F222 EVC Trimmer
AH242 Hedge Trimmer
AHS242 Articulated Hedge Trimmer
AHS242 Articulated Hedge Trimmer
C242 Brushcutter
81742 Multipurpose Tool Carrier
F222 EPA2 Trimmer
F222 EVC Trimmer
T222 Trimmer
T242 EPA2 Trimmer
T242 EVC Trimmer
T242X EPA2 Trimmer
F222 Grass Trimmers (F)
T242X Grass Trimmers (T)
M242 Multi-Tool System
T242 EPA2 Trimmer
T242 EVC Trimmer
T242X EPA2 Trimmer
F222 Grass Trimmers (F)
T242X Grass Trimmers (T)
M242 Multi-Tool System
Echo
Products Compatibility
This item works with the following types of products:
- • Edger
- • Hedge Trimmer
- • Trimmer
Repair Guides
Articles:
Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225 trimmer....
May 27, 2015
|
Questions & Answers for Carburetor Gasket
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
1 of 1 people found this instruction helpful
Tool Type:
Trimmer
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Needle nose pliers
Carburetor was gummed up, no fuel flow
Remove the air cleaner cover, and filter. Remove the screws securing the air filter base and carburetor. Remove the fuel lines and throttle. Remove the old carburetor gasket and carburetor. Install the new gasket, carburetor, air filter base with the screws. Replace the fuel lines and throttle. Replace the filter and air cleaner cover.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers
Trimmer would bog and then die at full throttle
Replacing all the fuel hoses, fuel tank filter and tank grommet did not fix the problem. The carburetor was non adjustable, so installed a new carburetor and gasket. Had to remove the throttle cable and two carburetor mounting bolts to make the swap. No tuning was required. Trimmer now runs like new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Allen wrench
Lost power and had trouble starting.
Replaced the carburetor, the fuel filter, the fuel lines, the plug and the air filter. Basically a rebuild of the fuel system. Trimmer now works like new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
0 of 1 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
, Allen wrench
My wife ran over my weed wacker. Ripped the carb off and broke the insulator.
Took off what remained of the insulator and replaced it along with two gaskets. Started up on first pull.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information
Repair Guides
Articles:
Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225 trimmer....
May 27, 2015
|