Easy
15-30 minutes
This is an authentic part that is supplied directly from the original equipment manufacturer for Shindaiwa chainsaws. The carburetor mixes air and gas before the fuel mix goes to the engine. This part is made of metal and is sold individually. Let the engine cool and drain the gas tank before starting this repair. You may need a screwdriver and a pair of needle nose pliers to aid you in this repair.
Carburetor Assy A021002980
OEM part for: Shindaiwa
Part Number: A021002980
$105.91
In Stock
Order within the next 3 minutes and your part ships today! 
Compatibility
This part will fit the following 7 machines
Shindaiwa
415 Chainsaw View Diagrams & Manuals
450 Chainsaw View Diagrams & Manuals
350 Gas Chainsaw View Diagrams & Manuals
416 Gas Chainsaw View Diagrams & Manuals
451 Gas Chainsaw View Diagrams & Manuals
500 Gas Chainsaw View Diagrams & Manuals
EC350 Cut-Off Saw View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Chain Saw Parts
- Saw Parts
This part replaces obsolete part #: 22128-81002
Repair Videos ?
Articles:
|
Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225 trimmer....
May 27, 2015
|
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Shindaiwa 500 chainsaw carburetor problem, saw would run for a couple of minutes and then die
Part received promptly even during the covid hysteria. Removed old carb and installed new. Worked perfectly out of the box - only thing I had to adjust was the idle screw. Very pleased
Guest -
July 1, 2020
Verified Purchase
Quick
Fit perfect. Quick service.
Guest -
December 26, 2019
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Carburetor Assy
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Worn out carb
Chad - May 24, 2018
👍 2 of 2 people found this instruction helpful
Tool Type
Chain Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Allen wrench
Simple repair....I took out two bolts and disconnected two hoses. Removed old carb and replaced with new. The chainsaw started on third pull. It runs like new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Actually it was a 2 cycle chainsaw, it would idle fine, but died when pulling the throttle.
Willard - September 16, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, hex / allen wrenches
Parts Used
1. Remove air filter
2. Remove 2 bolts holding the carburetor.
3. Carefully remove the throttle attachment, the choke attachment and the fuel line(s) - make note of what attaches where and keep all bolts and washers in exact same sequence for reassembly.
4. Remove carburetor from flexible rubber assembly attaching to motor housing
5. Reverse order to reassemble
6 It takes a lot of pulls on the starter rope to get fuel back to the carburetor (no pump bubble) but runs like a champ now. My 30 year old chainsaw is back to life.
2. Remove 2 bolts holding the carburetor.
3. Carefully remove the throttle attachment, the choke attachment and the fuel line(s) - make note of what attaches where and keep all bolts and washers in exact same sequence for reassembly.
4. Remove carburetor from flexible rubber assembly attaching to motor housing
5. Reverse order to reassemble
6 It takes a lot of pulls on the starter rope to get fuel back to the carburetor (no pump bubble) but runs like a champ now. My 30 year old chainsaw is back to life.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Chainsaw quit running
Jeff - April 18, 2019
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Allen wrench
Parts Used
Replaced carburetor on 416 shindaiwa chainsaw
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
