Easy
15-30 minutes
This genuine OEM sourced replacement part is designed for use with Poulan gas trimmers. The purpose of this part is to mix air and gas before the fuel mix goes to the engine. If the engine won't start and the tank is full of fresh fuel, test the carburetor by removing the air filter and pouring about a teaspoon of fuel into the carburetor. Pull the starter rope. If the engine starts and then quickly dies, the carburetor is likely the problem. This carburetor has a metal body and it is sold individually.
To complete this repair you would need a screwdriver.
• Remove the air filter cover
• Remove the air filter base
• Remove the throttle cable
• Remove the fuel lines
• Remove the carburetor
• Install the new carburetor
• Reinstall the fuel lines
• Reinstall the throttle cable
• Reinstall the air filter cover
Carburetor Assembly 545006017
OEM part for: Poulan
Part Number: 545006017
Order within the next 3 hours and your part ships today! 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.22 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 31 machines
Poulan
This item works with the following types of products:
- Trimmer Parts
- Pruner Parts
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Carburetor Assembly
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Died every time throttle was pressed
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Allen wrench
Parts Used
2. Removed bolts to carb.
3. Removed fuel lines from old carb. and reinstalled on new carb.
4. Put it all back together, started it and adjusted the idle
Weedeater was bogging and could not get full power
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Allen wrench
Parts Used
wont starte
Tool Type
Trimmer
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Socket set
Parts Used
Engine would run at idle but shut off when given throttle(lean condition)
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Wrench Set, Allen Wrench pack
Parts Used
The motor would fall flat when throttle was applied.
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, Allen wrench
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
