866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Power Tool Parts  Skil Parts  2610967197 Carbon-Brush Set

Carbon-Brush Set

Part Number: 2610967197
Skil
Availability: 10 in stock
Price: $4.25
Quantity:
Ships within 1 business day

*This part replaces obsolete part #: 2610376874 and 2 610 376 874.

Description:
This replacement carbon brush set is a genuine manufacturer sourced item. It is specially produced for Skil power tools. Motor brushes allow electricity to flow to the motor's spinning armature. Over time brushes will wear out and will require replacement. It is advised to replace both brushes at the same type. Please note, this set includes (2) metal brush holders and (2) carbon brushes.

You would need a screwdriver to replace these carbon brushes.

• Make sure the tool is unplugged
• First remove the housing/cover
• Remove the old brush
• Install the new brush
• Reassemble and test your tool
Product Information
Manufacturer: Skil
Product Number: 2610967197
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Products Compatibility

This item works with the following types of products:

  • • Drill
  • • Electric Drill
  • • Planer
  • • Sander
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Sander
Parts Used:
Carbon-Brush Set - 2610967197
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Belt sander quit running.
1. Disassemble sander, including brush and holder.
2. Polish the armature.
3. Reassemble tool, including the new part.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Drill
Parts Used:
Carbon-Brush Set - 2610967197
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
brushes was worn out
Removed old brushes and installed new brushes.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Parts Used:
Carbon-Brush Set - 2610967197
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Brushes stuck in holders
1. Opened case of my sander.
2. Replaced both brush holders.
3. Closed case.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Parts Used:
Carbon-Brush Set - 2610967197
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Bad carbon brush
Opened sander then replaced brushes
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Parts Used:
Carbon-Brush Set - 2610967197
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Wouldn't work
Removed the old brushes and replaced with new ones. Easy!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Parts Used:
Carbon-Brush Set - 2610967197
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Excessive sparking around brushes. Sander eventually stopped working.
1. Unscrewed an pulled apart sander body.
2. Unplugged and removed old brushes.
3. Plugged in and inserted new brushes.
4. Put body back together and re-screwed.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Parts Used:
Carbon-Brush Set - 2610967197
On-Off Switch - 2610353949
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Bad trigger switch and decided to replace brushes also while it was apart.
Removed the screws holding the tool together. Once it was apart removed the switch and from handle, unhooked the wires and hooked new switch wires and replace. Brushes are spring loaded and pull away from armature by pulling up and out. Once out, disconnected the wires, replaced wires on new brushes and did reverse to install. Once these items were installed, replaced the two halves of unit and tested OK ready to go.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Parts Used:
Carbon-Brush Set - 2610967197
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, soldering iron
One of the two brush sets overheated and melted a bit of the plastic holding it in place.
The replacement brushes were a precise fit. Their wiring was clear and easily accomplished. One of the connector wires had charred melted so I needed to solder on a new piece of wire to the connector. No problem. I had to shim the melted holder to align the brush set. Easy visual alignment. I used super glue to hold the shims in place (and probable the brush set too). Works so far and is back to new.

One problem: don't bend the metal tab holding the wire to the brush set. One minor bend and it broke off. My fault. No need to bend it for the fix.

Fun to write the directions. It is so much easier when you know how.

Pleased with the parts and fast delivery.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Carbon-Brush Set - ( 2610967197 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
Question: Skill 7313 Belt Sander

1488681

My sander does not start when the trigger is pushed..list this the switch or brushes...how do I determine which?
Many thanks,
Jerry
WJA
Hello Jerry,

It is sometimes difficult to determine if the problem with your power tool is the switch or brushes. We do have an article and video on Tool Diagnosis: Is it the Brushes or the Switch?. Hope this helps. Make sure you look for the type number of your sander before ordering the parts you need. It should start with an F.

-WJA
Reviews
5
Average Rating (out of 5):
1 Reviews
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Great Service
    Parts cam quickly, Packed well, easily assembled. My drill is working well again.
    Guest - April 29, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    visa mastercard discover american express PayPal
    HACKER SAFE certified sites prevent over 99.9% of hacker crime.

    fancyboxy