eReplacementParts.com
877-346-4814
DeWALT Parts
Repair Parts Home
  
Power Tool Parts
  
DeWALT Parts
  392574-01 Carbon Brush With Wire Lead

Carbon Brush With Wire Lead 392574-01

OEM part for: DeWALT

Part Number: 392574-01


Install
Videos!
Grid squares measure 1x1 inch
In Stock
Order within the next 9 hours and your part ships today!
Easy 15-30 minutes (6 rated repairs)?
OEM: Original Equipment Manufacturer ?
DeWALT
Does this d-block d-md-none fit my product?

Product Description ?

Genuine DeWalt replacement part
Includes 1 Carbon Brush with wire lead attached.

• Worn brushes frequently are the cause behind a motor running poorly.
• Replacing brushes can fix a motor that’s operating intermittently.
• New brushes can restore a motor’s electric braking.


Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Also Known As: Motor Brush With Wire Lead
  • Shipping: Ships Worldwide

Compatibility

This part will fit the following 34 machines

DeWALT

D28474W Type 1 7 inch Large Angle Grinder View Diagrams & Manuals
D28474W Type 2 7 inch Large Angle Grinder View Diagrams & Manuals
D28474W Type 3 7 inch Large Angle Grinder View Diagrams & Manuals
D28493N Type 1 9 inch Large Angle Grinder View Diagrams & Manuals
D28493N Type 2 9 inch Large Angle Grinder View Diagrams & Manuals
D28493N Type 3 9 inch Large Angle Grinder View Diagrams & Manuals
D28494N Type 1 9 inch Large Angle Grinder View Diagrams & Manuals
D28494N Type 2 9 inch Large Angle Grinder View Diagrams & Manuals
D28494N Type 3 9 inch Large Angle Grinder View Diagrams & Manuals
D28494S Type 1 7 inch Large Angle Grinder View Diagrams & Manuals
D28494S Type 2 7 inch Large Angle Grinder View Diagrams & Manuals
D28494S Type 3 7 inch Large Angle Grinder View Diagrams & Manuals
D28497 Type 1 7/9 inch Large Angle Sander View Diagrams & Manuals
D28497 Type 2 7/9 inch Large Angle Sander View Diagrams & Manuals
D28499X Type 1 7/9 inch Large Angle Grinder View Diagrams & Manuals
D28499X Type 2 7/9 inch Large Angle Grinder View Diagrams & Manuals
D28754 Type 1 12 inch Cut-Off Machine View Diagrams & Manuals
D28754 Type 2 12 inch Cut-Off Machine View Diagrams & Manuals
D284076B3 (Type 1) 6600rpm La Grinder View Diagrams & Manuals
D284076B3 (Type 2) 6600rpm La Grinder View Diagrams & Manuals
D28494WB3 (Type 1) 6500rpm Lag View Diagrams & Manuals
D28493G (Type 1) Large Angle Grinder View Diagrams & Manuals
D28494G (Type 1) Large Angle Grinder View Diagrams & Manuals
D28474WB3 (Type 1) 8000rpm Large Angle Grinder Power Tool View Diagrams & Manuals
D28474WB3 (Type 5) 8000rpm Large Angle Grinder Power Tool View Diagrams & Manuals
D28476WB3 (Type 1) 8500rpm Large Angle Grinder Power Tool View Diagrams & Manuals
D28490-B3 (Type 1) 9 In Angle Grinder Power Tool View Diagrams & Manuals
D28491-B3 (Type 1) Angle Grinder Power Tool View Diagrams & Manuals
D28491-B3 (Type 5) Angle Grinder Power Tool View Diagrams & Manuals
D28493PB3 (Type 1) 5000rpm Large Angle Grinder Power Tool View Diagrams & Manuals
D28494MB3 (Type 1) 6500rpm Large Angle Grinder Power Tool View Diagrams & Manuals
D28494N-B3 (Type 3) 9 In Angle Grinder Power Tool View Diagrams & Manuals
D28496MB3 (Type 1) 6500rpm Large Angle Grinder Power Tool View Diagrams & Manuals
D28755 (Type 2) Cut-Off Machine Power Tool View Diagrams & Manuals
Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Grinder Parts
  • Sander Parts
  • Chop Saw Parts
  • Saw Parts

This part replaces obsolete part #: 392460-01

Customer Part Reviews ?

5
Average Rating (out of 5):
1 Review
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • maintenance
    all the parts I order from u guys always works great and u guys always have the parts I need
    steve - May 29, 2019 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Carbon Brush With Wire Lead


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy 15-30 minutes (6 rated repairs)?

    Grinder would not run

    Mike - April 15, 2016
    👍 2 of 3 people found this instruction helpful
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Removed the rear handle and cover, pulled spring back holding the brush in the brush holder, disconnected the brushes from holders, then connected the new brushes, inserted the brush in the holder, then put the springs back in place. Then I attached the rear handle and cover.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    brushes / cord

    Glen - March 12, 2020
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver

    fixed brushes and cord
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    CARBON BRUSH WENT BAD.

    robert - December 6, 2018
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, TORX T20 DRIVER

    REMOVE BRUSH COVER WITH T20 DRIVER MOVE SPRING, UNPLUG BRUSH LEED WIRE REMOVE BRUSH PLACE NEW BRUSH IN THE SAME WAY YOU REMOVE THE OLD ONE, PLUG IN THE LEED WIRE AND SET SPRING BACK ON TOP OF BRUSH. REPLACE COVER . DONE.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Brushes wore out in corrosive environment.

    Bill - August 31, 2018
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Pliers

    Unscrewed body and removed brushes with needle nose pliers.
    Cleaned out. replaced brushes and holders and new springs.
    Then reassembled body.
    No special requirements just pay attention to the tear down and reverse procedure.
    Note: be careful unplugging wire connections.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Brushes were worn out

    Mark - October 16, 2017
    👍 0 of 1 people found this instruction helpful
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Removed both sides of the rear housing
    Pull back the spring hold the brushes in and place the end of the sprig on the brush holder
    Disconnect the old brushes and removed them
    Install the new brushes and connect them
    Release the brush holder spring
    Attach both sides of the rear housing
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Worn out brushes.

    Darlene - September 9, 2017
    👍 0 of 1 people found this instruction helpful
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Pliers, Socket set

    Removed the old brushes and replaced with the new ones.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal