eReplacementParts.com
877-346-4815
DeWALT Parts
Repair Parts Home
  
Power Tool Parts
  
DeWALT Parts
  387558-01 Carbon Brush With Wire Lead An

Carbon Brush With Wire Lead An 387558-01

OEM part for: DeWALT, Black and Decker

Part Number: 387558-01


Install
Videos!
Carbon Brush With Wire Lead An - 387558-01:DeWALT 360 View
Carbon Brush With Wire Lead An - 387558-01:DeWALTCarbon Brush With Wire Lead An - 387558-01:DeWALTCarbon Brush With Wire Lead An - 387558-01:DeWALT 360 View
In Stock
Order within the next 3 hours and your part ships today!
Easy 15-30 minutes (21 rated repairs)?
OEM: Original Equipment Manufacturer ?
DeWALTBlack and Decker
Does this d-block d-md-none fit my product?

Product Description ?

Genuine DeWalt replacement part.
rnIncludes 1 Carbon Brush with wire lead and terminal in rubber sheath attached.rnrn

• Worn brushes are frequently the cause of a poorly running motor.
• Replacing brushes can fix an intermittently operating motor.
• New brushes can restore a motor’s electric braking.


Carbon motor brushes are one of the most commonly replaced power tool parts. The reason is that carbon brushes are wear items, meaning that through friction and use they will gradually wear away and eventually will need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, also check your armature for burns, cracks, or other damage which are indications of a larger motor problem needing attention.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This part will fit the following 60 machines

DeWALT

DW935 Type 2 Cordless Trim Saw View Diagrams & Manuals
DW935 Type 3 Cordless Trim Saw View Diagrams & Manuals
DW936 Type 1 Cordless Trim Saw View Diagrams & Manuals
DW937 Type 1 Cordless Reciprocating Saw View Diagrams & Manuals
DW937 Type 2 Cordless Reciprocating Saw View Diagrams & Manuals
DW938 Type 1 18V Cordless Reciprocating Saw View Diagrams & Manuals
DW938 Type 2 18V Cordless Reciprocating Saw View Diagrams & Manuals
DW939 Type 1 18V 6-1/2 Cordless Circular Saw View Diagrams & Manuals
DW931 Type 1 14.4V Plate Joiner View Diagrams & Manuals
DW932 Type 1 18V Plate Joiner View Diagrams & Manuals
DW934 Type 1 Cordless Circular Saw View Diagrams & Manuals
DC385K Type 1 18V Cordless Recip Saw View Diagrams & Manuals
DW935 Type 4 Trim Saw View Diagrams & Manuals
DW936 Type 2 Cordless Saw View Diagrams & Manuals
DW938 Type 3 Cordless Recip Saw View Diagrams & Manuals
DC380 Type 1 Reciprocating Saw View Diagrams & Manuals
DCS381 Type 1 20V Reciprocating Saw View Diagrams & Manuals
DCS381 Type 2 20V Reciprocating Saw View Diagrams & Manuals
DW938 Type 4 18V Cordless Reciprocating Saw View Diagrams & Manuals
DW930K (Type 1) 5 1/4 12v Trimsawkt View Diagrams & Manuals
DW930K (Type 2) 5 1/4 12v Trimsawkt View Diagrams & Manuals
DW930K (Type 3) 5 1/4 12v Trimsawkt View Diagrams & Manuals
DW935K (Type 1) 14.4V Circular Saw View Diagrams & Manuals
DW935K (Type 2) 14.4V Circular Saw View Diagrams & Manuals
DW935K (Type 3) 14.4V Circular Saw View Diagrams & Manuals
DW935K (Type 4) 14.4V Circular Saw View Diagrams & Manuals
DW937K (Type 1) Heavy-Duty Cordless Reciprocating Saw View Diagrams & Manuals
DW937K (Type 2) Heavy-Duty Cordless Reciprocating Saw View Diagrams & Manuals
DW938K (Type 1) 18v Recip.Saw Kit View Diagrams & Manuals
DW938K (Type 2) 18v Recip.Saw Kit View Diagrams & Manuals
DW938-ROT (Type 1) 18v Cordless Recip.Saw View Diagrams & Manuals
DW938-ROT (Type 2) 18v Cordless Recip.Saw View Diagrams & Manuals
DC380K (Type 1) 18v Recip Saw View Diagrams & Manuals
DW934B (Type 1) 6-3/4-In. Cordless Metal Cutting Circular Saw View Diagrams & Manuals
DW932K (Type 1) 18v Plate Joiner View Diagrams & Manuals
DW934K-2 (Type 1) 18v Circular Saw View Diagrams & Manuals
DW938K-2 (Type 1) 18v Recip. Saw Kit View Diagrams & Manuals
DW938K-B2 (Type 2) Recip Saw View Diagrams & Manuals
DW939K (Type 1) 18v 6-1/2 Circular Saw View Diagrams & Manuals
DW931K (Type 1) 14.4v Plate Joiner View Diagrams & Manuals
DW936K (Type 1) 18v Cordless.Saw View Diagrams & Manuals
DW936K (Type 2) 18v Cordless.Saw View Diagrams & Manuals
DW935K-B2 (Type 1) 14.4v Circular Saw-Brazil Power Tool View Diagrams & Manuals
DW935K-B3 (Type 1) 14.4v Circular Saw-Mexico Power Tool View Diagrams & Manuals
DW938K-BR (Type 2) Dustbuster Power Tool View Diagrams & Manuals

Black and Decker

2832 Type 1 12.0v Industrial Cordless Trimsaw View Diagrams & Manuals
2832 Type 2 12.0v Industrial Cordless Trimsaw View Diagrams & Manuals
2832 Type 3 12.0v Industrial Cordless Trimsaw View Diagrams & Manuals
2834 Type 1 14.4v Industrial Cordless Trimsaw View Diagrams & Manuals
2834 Type 2 14.4v Industrial Cordless Trimsaw View Diagrams & Manuals
2834 Type 3 14.4v Industrial Cordless Trimsaw View Diagrams & Manuals
2836 Type 1 18v Industrial Cordless Saw View Diagrams & Manuals
Q145KS-2 Type 1 Cordless Drill View Diagrams & Manuals
2832K (Type 1) 12v Trimsaw Kit Ind View Diagrams & Manuals
2832K (Type 2) 12v Trimsaw Kit Ind View Diagrams & Manuals
2832K (Type 3) 12v Trimsaw Kit Ind View Diagrams & Manuals
2834K (Type 1) 14.4v Trimsaw Kit View Diagrams & Manuals
2834K (Type 2) 14.4v Trimsaw Kit View Diagrams & Manuals
2834K (Type 3) 14.4v Trimsaw Kit View Diagrams & Manuals
2836K (Type 1) 18v Cordless.Saw Kit View Diagrams & Manuals
Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Saw Parts
  • Trim Saw Parts
  • Reciprocating Saw Parts
  • Circular Saw Parts
  • Plate Joiner Parts
  • Cordless Drill Parts
  • Drill Parts

Customer Part Reviews ?

5
Average Rating (out of 5):
5 Reviews
Click to filter by ratings:
5 stars
5
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Worked great and did exactly what I hoped it would do
    part was packaged and labeled nicely. Saw-z-all is working perfect again. Thank you.
    Guest - December 15, 2020 Verified Purchase
    great part
    Great part didn’t fix my problem hopeing new switch will do it.
    Guest - May 26, 2020 Verified Purchase
    ok
    ok
    Guest - August 29, 2019 Verified Purchase
    Correct part, good quality
    Arrived as promised
    Guest - August 6, 2019 Verified Purchase
    Perfect replacement part, worked
    OE like part that worked great.
    Guest - May 14, 2019 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Carbon Brush With Wire Lead An


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy 15-30 minutes (21 rated repairs)?

    DeWalt sawzall handle broke off.

    Dennis - March 25, 2018
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Reciprocating Saw

    Difficulty

    Medium

    Time

    30-60 minutes

    Tools Used

    Screwdriver, Pliers

    1. Took the broken handle apart saving the trigger switch and safety lock.
    2. Remove the old brushes and wires. Hardest part of the whole job is moving the brush springs to the sides to remove the brushes.
    3. Install the new brushes and wires
    4. Place the trigger switch and safety lock in the new shell.
    5. Place the new shell around the existing motor housing and install screws.
    6. Check for proper operation.
    Complete
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Case broke

    Marvin - March 21, 2021
    Tool Type

    Reciprocating Saw

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, torx bit driver

    Removed the clamshell and all the screws.
    Install new Brush ring. Remove brush springs from old brush ring and install on new brush ring. Install new brushes. Reassembly clamshell case.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    The brushes seized sure to moisture

    Stuart - March 17, 2021
    Tool Type

    Cordless Drill

    Difficulty

    Medium

    Time

    30-60 minutes

    Tools Used

    Screwdriver, Pliers

    I took the still apart and realize that the brushes have welded themselves to the brush casing. As I tried to remove the brush it cracked the brush housing. I then ordered new brushes new springs and the brush holder and installed everything after carefully brushing down all the parts and cleaning everything. Put it all together and it works fine
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Melted terminal. Replaced feed wire and brush

    Matthew - February 26, 2021
    Tool Type

    Reciprocating Saw

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    , Puck set, soldering iron, heat shrink, terninal.

    Removed old brush. Added new terminal to brush feed wire added heat shrink to cover melted insulation, installed new brush and reconnected. Reassembled tool with torn screws.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    brush ring broke and broke brush wire

    Paul - July 7, 2020
    Tool Type

    Reciprocating Saw

    Difficulty

    Medium

    Time

    30-60 minutes

    Tools Used

    Screwdriver, torx bits

    Replace the brush ring and both brushes.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Handle broke off a saws all and pulled already away from the brush

    Wayne - August 7, 2019
    Tool Type

    Reciprocating Saw

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver

    1 screwed new handles to saw body.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    intermitten run

    G - March 5, 2019
    Tool Type

    Reciprocating Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    , torx

    disassemble handle removed old brushes replaced reassemble handle ran to brushes new brushes
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Old frayed smashed wires from carbon brush.

    donald - February 12, 2019
    Tool Type

    Reciprocating Saw

    Difficulty

    Easy

    Time

    30-60 minutes

    Tools Used

    Screwdriver, Pliers

    Read all instructions before beginning.
    Screwdriver only:
    1. Remove screws in the handle. Not all screws are the same size.
    2. Separate two handle pieces.
    3. Follow the wires from the top of the switch to the carbon brush.
    4. Gently lift the spring and pull the carbon brush out, put the new carbon brush in and put the spring down.
    5. Disconnect the old brush and lead connect the new one.
    6. Now do the other one.
    7. If you know how now is the time to check to see if the saw works.
    8. Put the handle back together. Avoid pinching the wires. Put in screws. Test the saw.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    handle broken.

    John - February 12, 2019
    Tool Type

    Reciprocating Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Replaced clam shell and (1) brush.
    Simple remove all screws with a T10 Torx driver.
    Reuse switch. Installed brush. ( Attached wire on brush was broken when handle failed.)
    Replace with new parts. SIMPLE
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    burning smell sluggish rotation of saw blade

    ed - February 12, 2018
    Tool Type

    Trim Saw

    Difficulty

    Medium

    Time

    15-30 minutes

    Tools Used

    Screwdriver, torx wrench

    Removed all case screws take apart to access interior motor. Remove old brushes replace with new. Broke brush ring in process that's why needed to replace that part, also very happy with ordering new parts and timely delivery to my home. thank you
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal