Carbon Brush Set CB204
and your part ships today!
*This part replaces obsolete part #: 191944-6 and 191957-7.
Set of 2 Carbon Brushes with wire leads and brush springs attached. The set contains genuine Makita replacement parts, and comes packaged in a Makita retail box. This brush set will fit the Makita tools listed at the bottom of the page. • Worn brushes frequently are the cause behind a motor running poorly.
|
This part is compatible with the following machines:
9049 Grinder
9069 Angle Grinder
HM1800 Breaker Hammer
HM1303 Demolition Hammer
HM1303B Demolition Hammer
HM1500 Demolition Hammer
9067L Angle Grinder
HM1500B Demolition Hammer
9040L Angle Sander
9060L Angle Sander
9077SL Angle Grinder
9047L Angle Grinder
HM1304B Demolition Hammer
GA7011C Angle Grinder
HM1810 Breaker Hammer
GA7021 Angle Grinder
GA7020 Angle Grinder
GA9020 Angle Grinder
GA7040S Angle Grinder
9027 Grinder
9027L Grinder
9047 Grinder
9047S Grinder
9047SF Grinder
9060DBL Sander
9067DB Grinder
9067F Grinder
9617 Grinder
GA7031Y Grinder
GA9031Y Grinder
GS5000 Grinder
HM1304B (Type 2) Misc
HM1810 (Type 2) Misc
HM1810 (Type 3) Misc
HM1810X3 (Type 1) Misc
HM1810X3 (Type 2) Misc
PK5011C Sander
PK5011CX1 Sander
This item works with the following types of products:
- • Demolition Hammer
- • Grinder
- • Sander
Questions & Answers for Carbon Brush Set
Removed the worn brushes
Put in the new brushes
Screwed the brush caps back on
Remove the old brushes
Install the new brushes
Screw the brush caps back on
2.Put new brushes in
2 Take out old brushes
3 Insert new brushes
4 Replace brush caps
Done
2. Removed one brush cover cap.
3. Removed worn carbon brush.
4. Installed new brush.
5. Replaced brush cover cap.
6. Repeated steps 2 through 5 for the second brush.
7. Total repair time 2 to 3 minutes.
8. The grinder is back in operation.
- 1
- 1