866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Power Tool Parts  Makita Parts  CB204 Carbon Brush Set

Carbon Brush Set

Part Number: CB204
Makita
Availability: 25+ in stock
Price: $19.95
Quantity:
Order within the next 7 hours
and your part ships today!

*This part replaces obsolete part #: 191944-6 and 191957-7.

Description:
Set of 2 Carbon Brushes with wire leads and brush springs attached.
The set contains genuine Makita replacement parts, and comes packaged in a Makita retail box.



This brush set will fit the Makita tools listed at the bottom of the page.

• Worn brushes frequently are the cause behind a motor running poorly.
• Replacing brushes can fix a motor that’s operating intermittently.
• New brushes can restore a motor’s electric braking.


Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

Product Information
Manufacturer: Makita
Product Number: CB204
Classification: Part
Weight: 0.01 lbs.
Also Known As: Motor Brush Set
Shipping: Ships Worldwide
Products Compatibility

This item works with the following types of products:

  • • Demolition Hammer
  • • Grinder
  • • Sander
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
2 of 2 people found this instruction helpful
Tool Type:
Grinder
Parts Used:
Carbon Brush Set - CB204
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Brushes were worn out
Removed the brush caps
Removed the worn brushes
Put in the new brushes
Screwed the brush caps back on
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Grinder
Parts Used:
Carbon Brush Set - CB204
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Brushes in Makita grinder worn
Remove the brush caps with a screwdriver
Remove the old brushes
Install the new brushes
Screw the brush caps back on
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Grinder
Parts Used:
Carbon Brush Set - CB204
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
No power
Unscrewed the brush cover and pulled out the old brushes and reinstalled the new brushes then screwed the covers back on.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Demolition Hammer
Parts Used:
Carbon Brush Set - CB204
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, allen wrench
Brushes worn
Remove the 2 screws holding the cap plate and rubber ring. Use a screwdriver to remove the brush caps. Remove the worn brushes and blow out brush holder. Install the new brushes, brush caps, rubber ring and cap plate.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Demolition Hammer
Parts Used:
Carbon Brush Set - CB204
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Worn brushes
Removed cover, removed brushes, put new ones in as old came out. Very simple.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Grinder
Parts Used:
Carbon Brush Set - CB204
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Grinder stopped working
1 Remove brush caps
2 Take out old brushes
3 Insert new brushes
4 Replace brush caps
Done
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Grinder
Parts Used:
Carbon Brush Set - CB204
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Removed brush housing cap with flat head screwdriver, removed worn brush, replaced with a new one and replaced housing cap. Turned grinder over and repeated steps in the same order.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Grinder
Parts Used:
Carbon Brush Set - CB204
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Grinder simply stopped working. Checked brushes, which were quite worn. The cause for the grinder not working was one brush had a wire that had broken through the brush carbon.
1. Took one slotted screwdriver.
2. Removed one brush cover cap.
3. Removed worn carbon brush.
4. Installed new brush.
5. Replaced brush cover cap.
6. Repeated steps 2 through 5 for the second brush.
7. Total repair time 2 to 3 minutes.
8. The grinder is back in operation.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Demolition Hammer
Parts Used:
Power Cord - 16', 16 Gauge, 2-Wire - 664276-9
Switch - 651922-3
Carbon Brush Set - CB204
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Socket set, Wrench Set
Electric jack wouldn't run.
Replaced the brushes, the switch and the power cord. Fixed. Ohmed out the power cord after the repair was completed and figured out that the power cord was bad. So, all it needed was a power cord but by then the other parts had also been replaced anyway. Success overall, so that is what counts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Grinder
Parts Used:
Carbon Brush Set - CB204
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
The brushes had worn down and needed to be replaced.
Removed the screws holding the brushes. Pulled out the old ones and put in the new ones. Simple and easy.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Carbon Brush Set - ( CB204 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
Question: Brushes

1190372

How to replace cb-204 brushes on a makita hm1303b hammer
Hi,
Remove the two screws on each of the two cap plates.Unscrew the brush caps and the spring loaded brushes should come out far enough to grab and pull out.If not you can use a paper clip to reach in and pull them link removed compressed air and blow the dust out of the brush tubes and reassemble in the reverse order.Hope that helps.Good luck.
Tinker
Reviews
1
Average Rating (out of 5):
1 Reviews
Click to filter by ratings:
1 stars
1
2 stars
0
3 stars
0
4 stars
0
5 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Poor Customer Service
    I paid for express shipping for my replacement parts, but was disappointed to find the wrong part was shipped to me. I was even more disappointed to find out how they handled the situation. I had to spend my own time and effort to correct their mistake by printing out a return label, repackaging the part, and taking it to the post office to be shipped back to them. While I did eventually receive the correct part after a week (even though I had paid for express 2 day shipping) I was left feeling dissatisfied with my experience and questioning why I had spent extra money for quick shipment when the part did not arrive for so long. Overall a very unhappy experience that will make me question where I shop for my parts in the future.
    Guest - April 19, 2019 Verified Purchase
    eReplacementParts Team
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    visa mastercard discover american express PayPal
    HACKER SAFE certified sites prevent over 99.9% of hacker crime.

    fancyboxy