eReplacementParts.com
877-346-4814
Makita Parts
Repair Parts Home  Power Tool Parts  Makita Parts  CB351 Carbon Brush Set

Install
Videos!
Carbon Brush Set - CB351:Makita 360 View
Carbon Brush Set - CB351:MakitaCarbon Brush Set - CB351:MakitaCarbon Brush Set - CB351:MakitaCarbon Brush Set - CB351:Makita 360 View

Carbon Brush Set CB351

Part Number: CB351
Makita
Availability: In Stock
Price: $8.12
Order within the next 12 hours
and your part ships today!

*This part replaces obsolete part #: CB350, 197244-2, CB-350 and 194160-9.

Product Information
Description:
This is a Genuine Manufacturer Sourced replacement part used on Makita Rotary Hammers. Includes Two (2) Carbon Brushes with Lead Wires attached. Please note Brush Holders and Springs are Sold Separately.

Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. It is recommended to replace both brushes at the same time.

You would need a Screwdriver and Pliers to complete this job.
Frequently Purchased With
Products Compatibility

This item works with the following types of products:

  • • Demolition Hammer
  • • Rotary Hammer

Questions & Answers for Carbon Brush Set


No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
2 of 2 people found this instruction helpful
Tool Type:
Demolition Hammer
Parts Used:
Carbon Brush Set - CB351
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers
Brush had worn down to the point of no contact with the armature.
Removed the rear cover and replace the brushes.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 2 people found this instruction helpful
Tool Type:
Rotary Hammer
Parts Used:
Carbon Brush Set - CB351
Control Plate - 419027-3
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
would not turn on
removed cover
used hook to hold brush springs up
with needle nose plyers removed brushes
checked stator for burn marks looked ok
installed new brushes
reinstalled cover
test run ok
back in service in 30 minutes

shipping was fast, repair was easy, price was great
shop would charge 85 dollars for 1 hour, the entire job diy was 12 dollars how great

Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
4.8
Average Rating (out of 5):
5 Reviews
Click to filter by ratings:
5 stars
4
4 stars
1
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Easy repair
    I buy all my power tool parts for my business here. Great website.
    John - December 28, 2020 Verified Purchase
    RIGHT PARTS
    Parts were right. Best part was easy to order and boom it was shipped. Tried another company on other stuff. They were much cheaper on an armature that I wanted but I think it might have been after market AND they have me in limbo and cant contact anyone. Sent e-mail, nothing yet. I am sticking with EREPLACEMENTPARTS from now on PERIOD.
    Paul - September 30, 2020 Verified Purchase
    Great part and worked great
    It arrived quickly and works well..the jack hammers works great
    Ericka - August 18, 2020 Verified Purchase
    Original part
    Everything good whith the part ,shipping speed little in the slow side
    Guest - November 7, 2019 Verified Purchase
    Easy repair with slight modification.
    One of the brushes was just slightly bigger than the other and was too tight in the housing to have enough pressure to maintain contact with the armature. I simply took a file and shaved it down a little, and the hammer drill is as good as new.
    Justin - April 27, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal