eReplacementParts.com
877-346-4814
Makita Parts
Repair Parts Home
  
Power Tool Parts
  
Makita Parts
  CB75 Carbon Brush Set

Carbon Brush Set CB75

OEM part for: Makita

Part Number: CB75


Install
Videos!
Carbon Brush Set - CB75:Makita 360 View
Carbon Brush Set - CB75:MakitaCarbon Brush Set - CB75:MakitaCarbon Brush Set - CB75:Makita 360 View
In Stock
Order within the next 9 hours and your part ships today!
Easy 15-30 minutes (26 rated repairs)?
OEM: Original Equipment Manufacturer ?
Makita
Does this d-block d-md-none fit my product?

Product Description ?

Set of 2 Carbon Brushes with wire leads and brush springs attached. The set contains genuine Makita replacement parts, and comes packaged in a Makita retail box.

This brush set will fit the Makita tools listed at the bottom of the page.

• Worn brushes are often the cause of a poorly running motor
• Replacing brushes can fix an intermittent motor
• New brushes can restore a motor’s electric braking


Carbon motor brushes are one of the most commonly replaced power tool components.  Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement.  Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power.  A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned.  When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

  • Genuine O.E.M. Makita replacement brushes
  • Sold in pairs (two brushes per box)
  • Fits many Makita power tools
  • Classification: Part
  • Weight: 0.01 lbs.
  • Also Known As: Motor Brush Set
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This part will fit the following 59 machines

Makita

BO5021K Sander View Diagrams & Manuals
BO5010 Random Orbit Sander View Diagrams & Manuals
JR3000V 6 Amp Variable Speed Reciprocating Saw View Diagrams & Manuals
6510LVR Drill View Diagrams & Manuals
6800DBV Screwdriver View Diagrams & Manuals
6801DBV Screwdriver View Diagrams & Manuals
6802BV Screwdriver View Diagrams & Manuals
6805BV Screwdriver View Diagrams & Manuals
9035 Finishing Sander View Diagrams & Manuals
BO4510 (Canada) Finishing Sander View Diagrams & Manuals
BO4551 Finishing Sander View Diagrams & Manuals
BO4552 Finishing Sander View Diagrams & Manuals
BO4562 Finishing Sander View Diagrams & Manuals
BO5021 Random Orbit Sander View Diagrams & Manuals
GV5000 Disc Sander View Diagrams & Manuals
BO5020 Random Orbit Sander View Diagrams & Manuals
BO4530 Finishing Sander View Diagrams & Manuals
BO5011 Random Orbit Sander View Diagrams & Manuals
BO3700 Finishing Sander View Diagrams & Manuals
JR3000VT Reciprocating Saw View Diagrams & Manuals
GE0600 Die Grinder View Diagrams & Manuals
3706 Drywall Cut-Out Tool View Diagrams & Manuals
BO5012 5 inch Random Orbit Sander View Diagrams & Manuals
BO4550 Finishing Sander View Diagrams & Manuals
4329 Top Handle Variable Speed Jig Saw View Diagrams & Manuals
HP1351 1/2" Hammer Drill View Diagrams & Manuals
DP4700 1/2" Electric Drill View Diagrams & Manuals
GV5010 5" Disc Sander View Diagrams & Manuals
BO4510 (USA) Finishing Sander View Diagrams & Manuals
BO5041K Random Orbit Sander View Diagrams & Manuals
JV0600K Jig Saw View Diagrams & Manuals
BO3710 Finishing Sander View Diagrams & Manuals
3706K Drywall Cut-Out Tool Kit View Diagrams & Manuals
M901 Finishing Sander View Diagrams & Manuals
6010BVR Drill View Diagrams & Manuals
6801DB Screwdriver View Diagrams & Manuals
6801DB (Type 2) Screwdriver View Diagrams & Manuals
6801DBV (Type 2) Screwdriver View Diagrams & Manuals
BO4552K Sander View Diagrams & Manuals
BO4552KX Sander View Diagrams & Manuals
BO5010K Sander View Diagrams & Manuals
BO5012K Sander View Diagrams & Manuals
BO5021K (Type 1) Sander View Diagrams & Manuals
BO5021 (Type 1) Sander View Diagrams & Manuals
GV6000 Sander View Diagrams & Manuals
HP1631K (Type 1) Drill View Diagrams & Manuals
HP1631 (Type 1) Drill View Diagrams & Manuals
Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Sander Parts
  • Saw Parts
  • Jig saw Parts
  • Drill Parts
  • Screwdriver Parts
  • Reciprocating Saw Parts
  • Grinder Parts
  • Laminate Trimmer Parts
  • Hammer Drill Parts
  • Electric Drill Parts

This part replaces obsolete part #: 643055-8, 643066-3, 643054-0, 191956-9, 194971-2, 643056-6, 643057-4

Customer Part Reviews ?

5
Average Rating (out of 5):
16 Reviews
Click to filter by ratings:
5 stars
16
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
  • 2
NEXT >
  • Easy repair
    Worked perfect needed a bit to work in now great
    Thomas M. - 6 days ago Verified Purchase
    Easy repair
    Arrived quickly. Easy to install works great
    Larry - April 24, 2023 Verified Purchase
    Makita 3/8" Drill Repair
    Order was exactly what was needed. It was delivered expeditiously.
    Guest - February 17, 2023 Verified Purchase
    Quick shipping!
    New, in Makita box. Excellent condition. Have not installed, bought for a contingency.
    Guest - April 9, 2022 Verified Purchase
    Great part
    Reasonable price great shipping
    Guest - February 28, 2022 Verified Purchase
    Little part
    I am 78 and dislike most web sites because some are too hard for me to maneuver. You're is great, easy to use.
    Art - December 17, 2021 Verified Purchase
    Matched exactly
    Arrived quickly,and fit perfectly
    Guest - January 7, 2021 Verified Purchase
    Perfect
    On time Fit Back in business
    Guest - March 10, 2020 Verified Purchase
    brushes
    delivered on time
    Guest - March 9, 2020 Verified Purchase
    Makita sander and porter cable sander brushes
    Both tools are back and running. You sent the correct parts and it was an easy fix . Thank you.
    Guest - February 24, 2020 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Carbon Brush Set


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy 15-30 minutes (26 rated repairs)?

    Brushes were worn out.

    Martha - January 16, 2016
    👍 7 of 9 people found this instruction helpful
    Tool Type

    Electric Drill

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver

    Removed handle cover, Then I removed the brush holders and removed the worn brushes. Then I installed the new brushes in the holders and installed the brush holders in the housing. Then I replaced the handle cover. Brushes purchased fit perfectly and job was completely successfully in less than 30 minutes. I received the parts in a very timely manner.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Broken brush; motor wouldn't turn or would turn slowly.

    Tam - January 2, 2016
    👍 4 of 4 people found this instruction helpful
    Tool Type

    Sander

    Difficulty

    Medium

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Pliers

    Makita palm sander; Took a little figuring to get it apart; had to pry the bearing out of the sanding pad. Need to be sure all the screws are taken out before pulling it apart. Brushes went in fine.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Worn brushes, would no run.

    Frank - December 5, 2017
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Drill

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    1. Open the handle.
    2. Remove the switch.
    3. Remove the brush holders, clean and replace the brushes.
    4. Reassemble.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Not working

    marty - June 3, 2016
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Reciprocating Saw

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver

    Remove the screws from the handle cover, remove the brush holders and brushes. Install the new brushes into the new holders and install them in the housing. Then screw the handle cover back on.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    An old sander that had a bad bearing and ruined brushes.

    Ricky - July 21, 2019
    Tool Type

    Sander

    Difficulty

    Expert

    Time

    1-2 hours

    Tools Used

    Screwdriver, Socket set, hammer

    had to take the sander completely apart. The brushes were an easy fix. It was tough to get the old bearing off the shaft and set the new bearing on the shaft. It took some ingenuity and a loy more time than i expected. The bearing was an exact fit. Thank goodness for the right parts. The sander is now ready for the next 40 years.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Original motor brushes worn out

    Frank - May 5, 2019
    Tool Type

    Sander

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver

    Opened case, removed worn brushes, replaced with new Makita parts.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    The sander would slow down when it was held against wood .

    Glenn - May 5, 2019
    Tool Type

    Sander

    Difficulty

    Medium

    Time

    1-2 hours

    Tools Used

    Screwdriver, Pliers, Air compressor for removing dust

    Disassembled the sander and replaced the brushes . also replaced a bearing which I hand on hand . Reassembled the sander . worked great ! I could not find parts locally , lucky me that I found Replacement Parts . GH
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    sander would not run

    Slotteo - April 15, 2019
    Tool Type

    Sander

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, none

    took the sander apart and put in new parts.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Dropped sander and broke 3 of 4 feet.

    Clint - March 20, 2019
    Tool Type

    Sander

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver

    Removed plate and split case. Slid the broken feet out and slid new feet into place. I replaced the brushes since I had split the housing and had easy access to them. Made sure wires were properly routed and retained before re-assembling and blew out sanding dust. Case screws are different lengths but are NOT easily mixed up. Nothing tricky about the repair and parts fit perfectly.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Bearing was bad on Makita BO4510 sander purchased at a yard sale

    DOUGLAS - February 25, 2019
    Tool Type

    Sander

    Difficulty

    Medium

    Time

    30-60 minutes

    Tools Used

    Screwdriver, Wrench Set, Nutdriver, gear puller

    1. Dismantled sander to determine which bearing was bad.
    2. Found the bottom motor bearing was bad
    3. Removed the armature and used a small gear puller to remove the bad bearing
    4. Pressed the replacement bearing in the shaft using a deep socket and hammer
    5. Removed the seals on the remaining bearings and re-packed them with low viscosity grease
    6. Replaced worn brushes
    7. Reassembled the sander and tested it.
    8. Now I have a sander that runs like new.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal