eReplacementParts.com
877-346-4814
Bosch Parts
Repair Parts Home
  
Power Tool Parts
  
Bosch Parts
  1607014176 Carbon Brush Set

Carbon Brush Set 1607014176

OEM part for: Bosch

Part Number: 1607014176


Install
Videos!
Carbon Brush Set - 1607014176:Bosch 360 View
Carbon Brush Set - 1607014176:BoschCarbon Brush Set - 1607014176:BoschCarbon Brush Set - 1607014176:Bosch 360 View
In Stock
Ships within 1 business day
Easy 15-30 minutes (9 rated repairs)?
OEM: Original Equipment Manufacturer ?
Bosch
Does this d-block d-md-none fit my product?

Product Description ?

Genuine Bosch replacement part
Set of 2 Carbon Brushes with wire lead attached.

• Worn brushes frequently are the cause behind a motor running poorly.
• Replacing brushes can fix a motor that’s operating intermittently.
• New brushes can restore a motor’s electric braking.


Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Also Known As: Motor Brush Set
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This part will fit the following 63 machines

Bosch

1346A (0601346039) 4-1/2" Mini Grinder View Diagrams & Manuals
1700A (0601700039) 4-1/2" Mini Grinder View Diagrams & Manuals
1700 (0601700239) 4-1/2" Mini Grinder View Diagrams & Manuals
1701A (0601701039) 5" Mini Grinder View Diagrams & Manuals
1701 (0601701239) 5" Mini Grinder View Diagrams & Manuals
1703EVS (0601703239) 5" Mini Grinder View Diagrams & Manuals
1703AEVS (0601703739) 5" Mini Grinder View Diagrams & Manuals
1710A (0601710039) 4-1/2" Mini Grinder View Diagrams & Manuals
1710AD (0601710139) 4-1/2" Mini Grinder View Diagrams & Manuals
1710 (0601710239) 4-1/2" Mini Grinder View Diagrams & Manuals
1710D (0601710439) 4-1/2" Mini Grinder View Diagrams & Manuals
1711A (0601711039) 5 inch Mini Grinder View Diagrams & Manuals
PA500 (0601775839) Grinder View Diagrams & Manuals
1700A (0601800039) Grinder View Diagrams & Manuals
1701A (0601801039) Grinder View Diagrams & Manuals
1703AEVS (0601803739) Grinder View Diagrams & Manuals
1806A (0601806739) Grinder View Diagrams & Manuals
B9250 (0603321735) Mini Grinder View Diagrams & Manuals
1775E (0601775739) 5 inch Tuckpoint Grinder View Diagrams & Manuals
1800 (3601H20010) 4-1/2" Angle Grinder View Diagrams & Manuals
1801 (3601H21010) 5" Angle Grinder View Diagrams & Manuals
1803EVS (3601H23010) 5" Variable Speed Angle Grinder View Diagrams & Manuals
1810PS (3601H31A10) 4-1/2" Paddle Switch Grinder View Diagrams & Manuals
1702AE (0601702739) Angle Grinder View Diagrams & Manuals
1711 (0601711239) Angle Grinder View Diagrams & Manuals
1711AD (0601711139) Angle Grinder View Diagrams & Manuals
1711D (0601711439) Angle Grinder View Diagrams & Manuals
1810PSD (3601H31210) Angle Grinder View Diagrams & Manuals
1811PS (3601H32A10) Angle Grinder View Diagrams & Manuals
1811PSD (3601H32210) Angle Grinder View Diagrams & Manuals
1821 (3601H30010) Angle Grinder View Diagrams & Manuals
1821D (3601H30A10) Angle Grinder View Diagrams & Manuals
1213 (0601213739) Electro Brush View Diagrams & Manuals
1812PSD (3601H33210) 6" Angle Grinder with No Lock-On Paddle Switch View Diagrams & Manuals
1821D 5" Rat Tail Grinder w/no lock View Diagrams & Manuals
1365K 14" Abrasive Cutoff Kit View Diagrams & Manuals
GKS 55 (3601F64002) Circular Hand Saw View Diagrams & Manuals
GKS 55 (3601F64003) Circular Hand Saw View Diagrams & Manuals
GKS 55 (3601F64032) Circular Hand Saw View Diagrams & Manuals
GKS 55 (3601F64072) Circular Hand Saw View Diagrams & Manuals
GKS 160 (3601F70001) Circular Hand Saw View Diagrams & Manuals
GKS 160 (3601F70002) Circular Hand Saw View Diagrams & Manuals
GWS 7115 (0601800032) Angle Grinder View Diagrams & Manuals
GWS 9125 (0601801014) Angle Grinder View Diagrams & Manuals
GWS 9125 (0601801015) Angle Grinder View Diagrams & Manuals
GWS 9125 (0601801016) Angle Grinder View Diagrams & Manuals
GWS 9125 (0601801034) Angle Grinder View Diagrams & Manuals
GWS 10125C (0601802734) Angle Grinder View Diagrams & Manuals
GWS 14125C (0601804537) Angle Grinder View Diagrams & Manuals
GWS 14125C (0601804737) Angle Grinder View Diagrams & Manuals
GWS 14125CE (0601805715) Angle Grinder View Diagrams & Manuals
GWS 7115 (0601380039) Angle Grinder View Diagrams & Manuals
GWS 7115 (0601380065) Angle Grinder View Diagrams & Manuals
0601381039 Angle Grinder View Diagrams & Manuals
0601382739 Angle Grinder View Diagrams & Manuals
0601383739 Angle Grinder View Diagrams & Manuals
3601H24803 Angle Grinder View Diagrams & Manuals
GWS 14125 INOX (3601H29J40) Angle Grinder View Diagrams & Manuals
DG 250 C (3601B20010) Straight Grinders View Diagrams & Manuals
3601B20140 Straight Grinders View Diagrams & Manuals
GGS 28 LCE (3601B21140) Straight Grinders View Diagrams & Manuals
GGS 28 LCE (3601B21150) Straight Grinders View Diagrams & Manuals
DG300LPD (3601B25010) Paddle Switch Die Grinder View Diagrams & Manuals
Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Grinder Parts
  • Saw Parts

This part replaces obsolete part #: 1607014175, 1607014172, 1607014138

Customer Part Reviews ?

5
Average Rating (out of 5):
5 Reviews
Click to filter by ratings:
5 stars
5
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Bosch Grinder
    I have used ereplacement more times than I can count. They are not the cheapest but I always get my parts fast and they always send original brand parts
    mark - May 4, 2022 Verified Purchase
    Parts for a grinder
    The parts work great grinder is fixed very satisfied with your parts
    Guest - December 8, 2020 Verified Purchase
    Easy repair
    The part arrived quickly, repair took 5 minutes, grinder ran perfectly!
    Guest - April 25, 2020 Verified Purchase
    Quick and Easy
    Part was perfect. Made my repair very quick and simple. Love doing business with y’all.
    Guest - October 17, 2019 Verified Purchase
    Easy repair
    Arrived quickly, easy to install, my angle grinder works like new again.
    Ronald - May 22, 2019 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Carbon Brush Set


    what are the dimensions of this part
    Jim asked on 2022-02-10
    Hi Jim, Thank you for your question. The brushes measure approximately 2 inches long. If you would like to place an order for the carbon brush set, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
    eReplacementParts Team February 10, 2022

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy 15-30 minutes (9 rated repairs)?

    the grinder wouldn't rotate

    Fran - September 26, 2016
    👍 2 of 2 people found this instruction helpful
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Removed the back housing and then it was out with the old and in with the new replace the housing done. Fran
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Grinder would not turn on

    gary - April 12, 2016
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Grinder

    Difficulty

    Medium

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Pliers

    I checked the power cord and on/off switch for continuity and both were good
    I removed the motor contact brushes and noticed that they were significantly worn down
    I also noticed a small spring protruding from one of the contact brushes
    The common fix note on the website stated that one of the most common fix for my problem was brush replacement.
    Ordered the replacement brush set and installed easily.
    Grinder works great
    Note: I used the exploded parts diagram to figure out how to disassemble the tool
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Arcing at commutator

    David - December 17, 2015
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Pliers, Little pick or piece of wire to raise spring

    Carefully remove 1/2 of rear case at a time and replace plug in brush, to avoid having to readjust placement of trigger, springs etc. Easy on this one, had no other problems.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Worn motor brushes

    Thomas - January 2, 2022
    Tool Type

    Grinder

    Difficulty

    Medium

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Pliers, parts cleaning brush and sandpaper

    1) Disassembled the case by removing case screws
    2) Removed motor armature
    3) Dressed commutator with 400-grit sandpaper glued to tongue depressor
    4) Removed old commutator brushes
    5) Reinstalled motor armature
    6) Replaced old brushes with new ones
    7) Reassembled the case
    8) Tested the tool.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Didn’t turn on

    Don - November 26, 2020
    Tool Type

    Grinder

    Difficulty

    Medium

    Time

    30-60 minutes

    Tools Used

    Screwdriver, Pliers, Sander

    Replaced brushes but the replacement parts for that model were too wide and I had to sand down the sides
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Brush wore down to minimum size, spring button released to stop grinder.

    Ronald - May 23, 2019
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Needle nose pliers, dental pick

    Removed outer housing, used dental pick to pull brush spring up and set aside. Removed brush from holder and used needle nose pliers to disconnect brush. Reverse procedures to in install brushes and put housing together.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    My Bosch 1810PS 4-1/2" Grinder stopped working. No Sound, No Movement whatsoever

    Dennis - March 19, 2018
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, Slotted Screwdriver, Continuity Tester

    1.) Unplugged unit.
    2.) Using a Slotted Screwdriver or T15 Torx, I removed the (4) screws holding the two covers over power switch. I then pried the two covers apart and off the tool with a slotted screwdriver.
    3.) Using a Digital Multimeter (a VOM or Continuity Tester will work also) I checked for continuity thru both wires in the power cord one at a time from the plug prongs to the power switch. I made sure to wiggle the power cord while checking continuity. I had continuity thru both wires.
    4.) Next using the Multimeter I did the same continuity check for both poles of the power switch, one pole at a time. This also checked out OK.
    5.) Next using a small Slotted Screwdriver I released the spring holding tension on one brush in its holder. I pulled the brush out while leaving its braided wire still connected to its terminal.
    6.) The brush still appeared to have some life left in it by its size, but there was a black plastic pin sticking out of the brush face. Bosch has incorporated a spring loaded plastic tipped plunger into the back of the brush and this plunger is exposed when the brush wears down to a certain height. When the plunger is exposed the spring in the plunger lifts the brush off of the commutator so no electrical connection is made and the tool will not work. Bosch did this to save the tool from being destroyed by running the brushes down to the very end. So it appeared at this point all I needed was brushes. The commutator looked good.
    7.) I also checked for continuity thru both stator coils with the multimeter. This required unplugging both brushes, one at a time. I used a small pair of needle nose pliers to unplug the brushes. The Stator Coils also checked fine.
    8.) So I ordered a new pair of brushes. I installed them making sure the brush braided cable is routed correctly so as to not inhibit brush movement. I reinstalled both covers over the switch, powered up the tool, and it worked just fine.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    My grinder stopped working suddenly, changing the brushes would be the most inexpensive first step.

    Fran - January 4, 2016
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    I removed the housing on the grinder lifted up the tension springs that's one on each side pulled out the electrical connections lifted the old brushes out and replaced with the new ones. The grinder works fine. Before finding your web site we would buy new grinders. Thanks Again Fran F.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Worn brushes

    kurt - December 5, 2015
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Remove back cover, pull spring end and place to the side if the brush holder. Remove old brushes from terminals. Install the new brushes in reverse order.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal