eReplacementParts.com
877-346-4814
Metabo HPT (Hitachi) Parts

Carbon Brush Set 999038

OEM part for: Metabo HPT (Hitachi)

Part Number: 999038


Install
Videos!
Carbon Brush Set - 999038:Metabo HPT (Hitachi) 360 View
Carbon Brush Set - 999038:Metabo HPT (Hitachi)Carbon Brush Set - 999038:Metabo HPT (Hitachi)Carbon Brush Set - 999038:Metabo HPT (Hitachi) 360 View
In Stock
Order within the next 9 hours and your part ships today!
Easy Less than 15 minutes (26 rated repairs)?
OEM: Original Equipment Manufacturer ?
Metabo HPT (Hitachi)
Does this d-block d-md-none fit my product?

Product Description ?

Set of 2 Carbon Brushes with wire leads and brush springs attached. The set contains genuine Hitachi replacement parts, and comes packaged in a Hitachi retail box. rnThis brush set will fit the Hitachi tools listed at the bottom of the page.rnrnrn

• Worn brushes frequently are the cause behind a motor running poorly.
• Replacing brushes can fix a motor that’s operating intermittently.
• New brushes can restore a motor’s electric braking.


Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Also Known As: Motor Brush Set
  • Shipping: Ships Worldwide

Compatibility

This part will fit the following 59 machines

Metabo HPT (Hitachi)

C7BMR 7-1/4" Pro-Grade IDI Circular Saw View Diagrams & Manuals
C7SB2 7-1/4" 15 Amp Circular Saw View Diagrams & Manuals
C7YAH 7-1/4" Dust Reducing Circular Saw View Diagrams & Manuals
C7YAK 7-1/4" Dust Reducing Circular Saw View Diagrams & Manuals
C8 8-1/4" 13 Amp Circular Saw View Diagrams & Manuals
C10FCE2 10" Compound Miter Saw View Diagrams & Manuals
C10FCH2 10" Laser Compound Miter Saw View Diagrams & Manuals
C12FCH 12" Laser Compound Miter Saw View Diagrams & Manuals
C12FDH 12" Laser Dual Compound Miter Saw View Diagrams & Manuals
C12LCH 12" Compound Miter Saw View Diagrams & Manuals
C12LDH 12" Dual Compound Miter Saw View Diagrams & Manuals
C12LSH 12" Sliding Dual Compound Miter Saw View Diagrams & Manuals
C12RSH 12" Sliding Dual Compound Miter Saw View Diagrams & Manuals
C12LC 12" LCD Compound Miter Saw View Diagrams & Manuals
C12FSA 12" Sliding Dual Compound Miter Saw View Diagrams & Manuals
C10FCH 10" Laser Compound Miter Saw View Diagrams & Manuals
C10FCE 10" Compound Miter Saw View Diagrams & Manuals
TR12 1/2" 3 HP Plunge Router View Diagrams & Manuals
C10FB 10" Miter Saw View Diagrams & Manuals
C7BD Circular Saw View Diagrams & Manuals
C7BD2 Circular Saw View Diagrams & Manuals
C9 Circular Saw View Diagrams & Manuals
P50 6-5/8" Hand Planer View Diagrams & Manuals
SB-110 Belt Sander View Diagrams & Manuals
G18SS Disc Grinder View Diagrams & Manuals
C10FCH2SM 10 Inch Compound Miter Saw With Laser Marker View Diagrams & Manuals
C12FDHSM 12 Inch Dual Bevel Miter Saw With Laser Marker View Diagrams & Manuals
C12RSH2M 12 Inch Sliding Compound Miter Saw Wh Laser Marker,sliding Fences View Diagrams & Manuals
C7BURM 7-1/4 Inch Ripmax Pro Grade 15 Amp 6800 Rpm Circular Saw W/ Brake View Diagrams & Manuals
C7SB3M 7-1/4 Inch 15 Amp Light Weight Circular Saw View Diagrams & Manuals
C7URM 7-1/4 Inch Ripmax Pro Grade 15 Amp 6800 Rpm Circular Saw View Diagrams & Manuals
H55SB Hammer Drill View Diagrams & Manuals
C12FCHE2 Hammer Drill View Diagrams & Manuals
C12LCE2 Hammer Drill View Diagrams & Manuals
C12LCHE2 Hammer Drill View Diagrams & Manuals
CC14SA Drill Press View Diagrams & Manuals
DU-PN2 Drill Press View Diagrams & Manuals
Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Circular Saw Parts
  • Saw Parts
  • Miter Saw Parts
  • Router Parts
  • Planer Parts
  • Sander Parts
  • Grinder Parts

Customer Part Reviews ?

4.8
Average Rating (out of 5):
16 Reviews
Click to filter by ratings:
5 stars
15
4 stars
0
3 stars
0
2 stars
0
1 stars
1
  • Highest Rating
  • Most Recent
< PREV
  • 1
  • 2
NEXT >
  • Easy repair. Fast and accurate order.
    Easy repair. Fit perfect
    Guest - January 21, 2023 Verified Purchase
    Great parts
    Thank for having hard to find parts
    Anonymous - June 11, 2022 Verified Purchase
    Good
    Good condition and come litle long time
    Guest - July 19, 2021 Verified Purchase
    fast ship
    fast ship & the parts eorke just fine, thanks.
    craig - November 17, 2020 Verified Purchase
    Fast delivery. Trouble shooting guide was spot on.
    Genuine Hitachi parts. Saw is back in service; like new.
    Guest - February 25, 2020 Verified Purchase
    Perfect Fit
    Fit perfect one screw to remove for each side (simple repair) a litle slow delivery excellent reair parts
    Guest - November 22, 2019 Verified Purchase
    Great part
    The parts came quickly and fit just like the original ones. Thank you! Will de ordering more parts from them in the future when needed!
    Guest - November 4, 2019 Verified Purchase
    This was an easy repair to do.
    The brush set came quickly and fit just right!
    Guest - September 27, 2019 Verified Purchase
    good part
    saw is running as good as ever
    Guest - September 20, 2019 Verified Purchase
    Easy to replace, however, the real problem was the switch. I replaced it too and the router worked fine.
    The parts were excellent. My Hitachi TR12 router would not start. Brushes were indicated as the likely problem. I replaced them easily but the router still would not start. I ordered a new switch and replaced the old one and the router started as designed. Thanks.
    Guest - August 15, 2019 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Carbon Brush Set


    Have C12RSH2 12inch miter saw - how do I know when my brushs need need replacing?
    John for model number C12RSH2 asked on 2022-11-11
    Hello John, Thank you for the question. If you look at the brushes you will see wear or damage. Also the unit may not run properly or start or stay running. We hope this helps, good luck with this repair!
    eReplacementParts Team November 11, 2022

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy Less than 15 minutes (26 rated repairs)?

    Worn brushes

    Fred - December 17, 2015
    👍 7 of 7 people found this instruction helpful
    Tool Type

    Miter Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Remove the brush caps from each side of the motor housing. Remove worn brushes, then insert new brushes. Replace the brush caps, your done.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Saw seemed to have lost power

    Ronald - August 21, 2018
    👍 2 of 2 people found this instruction helpful
    Tool Type

    Circular Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    There is a screw cap on each side of the saw, easily removed with a flat head screwdriver. I removed each cap and removed each brush. I installed the new brushes and the saw works great.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Saw would start but not keep running.

    Donald - January 30, 2019
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Circular Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, Pliers

    Pulled the old brushes out and put in the new ones.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Brushes were bad

    Howard - February 14, 2017
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Miter Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Unscrewed the cap, took the old brush out. Put the new brush in and put the cap back on.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Brushes worn

    ERIC - June 14, 2016
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Miter Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    With a straight screwdriver remove the black brush caps. The remove the worn brushes from the brush holders. Blow out the motor with compressed air. Install the new brushes and replace the brush caps.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Brushes arcing

    Richard - August 16, 2018
    Tool Type

    Miter Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Removed caps and old brushes, inserted new brushes and replaced caps.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Brush and cap were missing.

    John - August 15, 2018
    Tool Type

    Circular Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Removed the remaining brush cap
    Installed the new brushes
    Installed the brush caps
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Needed brushes

    Alvin - July 5, 2018
    Tool Type

    Circular Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Removed the brush caps with a screwdriver
    Removed the old brushes
    Installed the new brushes
    Screwed the brush caps back on
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Worn brushes

    john - July 5, 2018
    Tool Type

    Miter Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, Needle nose pliers

    Removed the cover to the brushes cover pulled them out and put in the new ones then replaced the covers it was that easy.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Not running consistently

    Paula - April 27, 2018
    Tool Type

    Miter Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Unplug the tool. Remove the caps holding old carbon brushes. Remove old ones and replace with new ones. Replace the caps.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal