eReplacementParts.com
877-346-4814
Metabo HPT (Hitachi) Parts

Carbon Brush Set 999044

OEM part for: Metabo HPT (Hitachi)

Part Number: 999044


Install
Videos!
Carbon Brush Set - 999044:Metabo HPT (Hitachi) 360 View
Carbon Brush Set - 999044:Metabo HPT (Hitachi)Carbon Brush Set - 999044:Metabo HPT (Hitachi)Carbon Brush Set - 999044:Metabo HPT (Hitachi) 360 View
In Stock
Order within the next 44 minutes and your part ships today!
Easy 15-30 minutes (15 rated repairs)?
OEM: Original Equipment Manufacturer ?
Metabo HPT (Hitachi)
Does this d-block d-md-none fit my product?

Product Description ?

Set of 2 Carbon Brushes with wire leads and brush springs attached. The set contains genuine Hitachi replacement parts, and comes packaged in a Hitachi retail box. rnThis brush set will fit the Hitachi tools listed at the bottom of the page.

• Worn brushes frequently are the cause behind a motor running poorly.
• Replacing brushes can fix a motor that’s operating intermittently.
• New brushes can restore a motor’s electric braking.


Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

  • Classification: Part
  • Weight: 0.04 lbs.
  • Also Known As: Motor Brush Set
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This part will fit the following 54 machines

Metabo HPT (Hitachi)

CB75F Band Saw View Diagrams & Manuals
CC14SF 14" Portable Chop Saw View Diagrams & Manuals
CC12Y 12" AC/DC Portable Cut-Off Saw View Diagrams & Manuals
C15FB 15 Miter Saw View Diagrams & Manuals
M12SA2 3-1/4 Peak HP Single Speed Plunge Router View Diagrams & Manuals
C10FR 10" Jobsite Table Saw View Diagrams & Manuals
C10FCB 10" Compound Miter Saw View Diagrams & Manuals
CC14SE 14" Portable Cut-Off Machine View Diagrams & Manuals
H65 1-1/8" Hex Demolition Hammer View Diagrams & Manuals
F-1000A Planer Jointer View Diagrams & Manuals
C10FC Compound Miter Saw View Diagrams & Manuals
C10RA2 Table Saw View Diagrams & Manuals
C12FA 12" Miter Saw View Diagrams & Manuals
G18SE2 7" Disc Grinder 15Amp View Diagrams & Manuals
G23SC2 9" Disc Grinder 15Amp View Diagrams & Manuals
G23SF Disc Grinder View Diagrams & Manuals
M12V 1/2" Router, 3-1/4 HP 15Amp Electronic Variable Speed View Diagrams & Manuals
FA-700 Finishing Planer View Diagrams & Manuals
PDL180A Grinder View Diagrams & Manuals
PDL230 Grinder View Diagrams & Manuals
PH-85 Demo Hammer View Diagrams & Manuals
PSM-9 Circular Saw View Diagrams & Manuals
DH50MRY Rotary Hammer View Diagrams & Manuals
G18SR Disc Grinder View Diagrams & Manuals
G23SR Disc Grinder View Diagrams & Manuals
CC14SF/SFS Cut-Off Machine View Diagrams & Manuals
G18SRU Grinder View Diagrams & Manuals
G23SRU Grinder View Diagrams & Manuals
CC14SFSM 14 Inch High Speed Abrasive Cut-Off Machine View Diagrams & Manuals
CC12YM 12-Inch Cut-Off Saw, 15 Amp, 5,000 Rpm, Ac/Dc View Diagrams & Manuals
M12V2M 3-1/4 +a5082:b5096hp Plunge Router, Variable Speed (Evs), 1/2 Inch Collet View Diagrams & Manuals
M12VEM 3-1/4 Hp Plunge Router, Variable Speed (Evs), 1/2 Inch Collet View Diagrams & Manuals
H90 Hammer Drill View Diagrams & Manuals
BM25 Drill Press View Diagrams & Manuals
C10RA2E3 Hammer Drill View Diagrams & Manuals
G18SG Grinder View Diagrams & Manuals
G18SH Grinder View Diagrams & Manuals
G18UA Grinder View Diagrams & Manuals
G18UB Grinder View Diagrams & Manuals
G23SE Grinder View Diagrams & Manuals
G23UA Grinder View Diagrams & Manuals
G23UB Grinder View Diagrams & Manuals
H65SA Demolition Hammer View Diagrams & Manuals
PDH180C Grinder View Diagrams & Manuals
Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Band Saw Parts
  • Saw Parts
  • Chop Saw Parts
  • Table Saw Parts
  • Miter Saw Parts
  • Router Parts
  • Demolition Hammer Parts
  • Jointer Parts
  • Planer Parts
  • Grinder Parts
  • Circular Saw Parts
  • Rotary Hammer Parts

Customer Part Reviews ?

4.5
Average Rating (out of 5):
16 Reviews
Click to filter by ratings:
5 stars
11
4 stars
3
3 stars
1
2 stars
1
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
  • 2
NEXT >
  • Fast fix, keep a tool running
    The part fit great, got the older miter saw working again, it is nice to find parts for older tools at a fair price.
    Robert - March 7, 2023 Verified Purchase
    Great
    >
    Guest - May 13, 2022 Verified Purchase
    Great parts and durable works just fine!!!
    The parts arrived before time and I started using the tools and they work fine!!!
    Guest - February 13, 2021 Verified Purchase
    Perfect fit
    The parts arrived quickly and they were easy to order off the illustrated parts breakdown.
    Guest - November 6, 2020 Verified Purchase
    Easy repair
    Part as advertised and arrived quickly.
    Charles - June 12, 2020 Verified Purchase
    Correct part arrived on time.
    Ordering was easy, follow-up with delivery schedule, arrival on time, is the correct part.
    Guest - February 17, 2020 Verified Purchase
    Worked Great
    Just what I wanted!
    David - September 30, 2019 Verified Purchase
    Plunge router parts
    Parts arrived exactly as I ordered in good time. This is not the first time I have shopped for replacement parts from this vendor nor will it likely be the last.
    iGlobal - June 23, 2019 Verified Purchase
    Part was exactly what I needed; installed easily; great price.
    Received the Carbon Brush Set in a few days and had it installed the same day. Parts were exactly what I needed. Table saw now works like new.
    Guest - June 10, 2019 Verified Purchase
    Looked like the OEM part
    Fast delivery,and just what I wanted
    Guest - May 23, 2019 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Carbon Brush Set


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy 15-30 minutes (15 rated repairs)?

    Bad switch, needed brushes

    John - January 21, 2016
    👍 6 of 6 people found this instruction helpful
    Tool Type

    Table Saw

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver

    I pressed on the tabs on the top and bottom of the bad switch to release it from the housing. I removed one lead at a time from the old switch to the new switch then pressed the switch back into the housing. To replace the brushes I removed the brush caps with a screwdriver, then remove the old brushes and inserted the new ones. I then screwed the brush caps back on.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Brake was not working

    Nick - September 19, 2016
    👍 3 of 3 people found this instruction helpful
    Tool Type

    Miter Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    With a screwdriver, carefully remove the brush caps from the motor housing. Then remove the old brushes from the brush holder. If you have compressed air, now is a good time to clean out that area of the motor. Then insert the new brushes back into the holders and screw the brush caps back on.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Bought saw at garage sale as is with missing parts

    Duane - June 28, 2017
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Miter Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    I put in new brushes and screwed the caps on. Saw works great.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Power switch lever was jammed in the off position

    David - January 25, 2023
    Tool Type

    Router

    Difficulty

    Medium

    Time

    30-60 minutes

    Tools Used

    Screwdriver, Pliers

    Tear down was done in advance, while awaiting parts. New lever was installed. New brushes also. Reassembled the housing and turned it on. Started right up.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    One of the motor brushes wash chipped

    Frank - May 24, 2022
    Tool Type

    Table Saw

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver

    Removed brush caps. Installed new brushes and replaced caps
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Bearing were dry

    Robert - October 6, 2021
    Tool Type

    Router

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, Adjustable Wrench

    Pulled router motor out of case, pulled bearings and brushes. Installed new ones.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Motor wouldn't start when the trigger was pulled.

    Phil - September 7, 2019
    Tool Type

    Miter Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Removed the brush retaining cap screws.
    Removed the worn brushes.
    Replaced brushes and cap screws.
    These parts have a limited life span and are designed to wear down with use, much like brake pads. They are easily and cheaply replaced.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    No power to the Miter Saw

    Richard - April 30, 2019
    Tool Type

    Miter Saw

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver

    1. Clean the tool
    2. remove and replace the brushes, and switch parts
    3. Test and operate

    25 year old saw is now good as new.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Carbon brush broke in two

    Ramon - January 18, 2019
    Tool Type

    Demolition Hammer

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Pliers

    replaced carbon brush set
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Motor started arcing

    James - June 22, 2018
    Tool Type

    Router

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Removed the brush caps
    Removed the old brushes
    Installed the new brushes
    Installed the brush caps
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal