Carbon Brush Set CB76
and your part ships today!
*This part replaces obsolete part #: 643050-8, 643053-2, 643072-8, 191912-9, 643052-4 and 191947-0.
|
Genuine Makita replacement part Set of 2 Carbon Brushes with wire leads and brush springs attached. • Worn brushes are often the cause of a poorly running motor
|
This part is compatible with the following machines:
Step-by-step instructions for removing and installing the motor brushes on your Makita planer....
August 06, 2018
|
Questions & Answers for Carbon Brush Set
Popped in the new brushes and put on the new caps
Remove the old brushes
Installed the new brushes
Screwed the brush caps back on
2 Removed old brushes
3 Installed new brushes
4 Put brush caps back on
5 Plug into hot outlet, pull trigger. Runs like a champ.
Overall very easy repair.
Pulled out brushes with needle nose pliers. They were a bit stuck.
put in new brushes
replaced plugs.
Motor ran
- 1
- 1
Step-by-step instructions for removing and installing the motor brushes on your Makita planer....
August 06, 2018
|