866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Power Tool Parts  Porter Cable Parts  N031653 Carbon Brush

Carbon Brush

Part Number: N031653
Porter Cable
Availability: 25+ in stock
Price: $6.32
Quantity:
Ships within 1 business day

*This part replaces obsolete part #: and 869664.

Specifications
  • Dimension: 120V
Description:
Genuine Porter Cable replacement part
includes 1 Carbon Brush with wire lead and brush spring attached.rn

• Worn brushes are often the cause of a poorly running motor
• Replacing brushes can fix an intermittent motor
• New brushes can restore a motor’s electric braking


Carbon motor brushes are one of the most commonly replaced power tool components.  Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement.  Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power.  A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned.  When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

Product Information
Manufacturer: Porter Cable
Product Number: N031653
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Products Compatibility

This item works with the following types of products:

  • • Planer
  • • Sander
  • • Saw
  • • Trim Saw
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
1 of 1 people found this instruction helpful
Tool Type:
Circular Saw
Parts Used:
Carbon Brush - N031653
Repair Difficulty:
Medium
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Worn out brushes
Remove the brush caps with a screwdriver, then remove the worn brushes. Install the new brushes, then screw the brush caps back on.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Circular Saw
Parts Used:
Carbon Brush - N031653
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Brushes needed replaced
Removed caps took old brushes out replaced with new
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Circular Saw
Parts Used:
Carbon Brush - N031653
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
The saw would not work
1. Removed and replace the brushes
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Parts Used:
Carbon Brush - N031653
Sander Pad - 846456
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver
brushes almost gone. pad torn.
replaced brushes and sander pad.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Circular Saw
Parts Used:
Carbon Brush - N031653
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Saw would not run
Installed new brushes
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Circular Saw
Parts Used:
Carbon Brush - N031653
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Saw would not run
Checked brushes, noted wear, slipped in new brushes, exterior caps make it a snap.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Parts Used:
Carbon Brush - N031653
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Brush replacement
Removed screws from top of sander...unscrewed brush caps...discovered how
much dust accumulates within sander...cleaned out with compressed air... ...replaced top and bingo like new sander...easy
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Circular Saw
Parts Used:
Carbon Brush - N031653
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Brushes needed replacement!
Removed the brush caps with a screwdriver
Removed the old brushes
Installed the new brushes
Used he screwdriver to replace the brush caps
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Circular Saw
Parts Used:
Carbon Brush - N031653
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Brushes worn
I removed the the brush caps with a screwdriver. Then I pulled out the worn brushes. Then installed the new brushes, and replaced the brush caps.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Carbon Brush - ( N031653 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
visa mastercard discover american express PayPal
HACKER SAFE certified sites prevent over 99.9% of hacker crime.

fancyboxy