eReplacementParts.com
877-346-4814
Toro Parts
Preferred Partners of
Repair Parts Home  Lawn Equipment Parts  Toro Parts  119-1988 Carb Repair Kit
Grid squares measure 1x1 inch

Carb Repair Kit

Part Number: 119-1988
Toro
Availability: 22 in stock
Price: $28.72
Ships within 1 business day

*This part replaces obsolete part #: 119-1971.

Product Information
Manufacturer: Toro
Product Number: 119-1988
Classification: Part
Weight: 0.06 lbs.
Shipping: Ships Worldwide
Description:
It is a genuine item that is supplied by the original equipment manufacturer for use with carburetors installed on Toro snowblowers. This is a complete kit that can be used to repair a faulty or a worn carburetor. Unfortunately, over time gaskets and o-rings tend to wear out and they may begin to fail eventually requiring replacement to maintain peak performance. Please make sure to refer to the owners manual and the appropriate diagrams of your specific model for the exact application of these components. Keep in mind this high-quality kit is sold individually.
Compatibility

This part is compatible with the following machines:

Toro
Expand the 31 compatible machines
Products Compatibility

This item works with the following types of products:

  • • Snowblower
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
2 of 2 people found this instruction helpful
Tool Type:
Snowblower
Parts Used:
Carb Repair Kit - 119-1988
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Pliers, Socket set
Nothing went wrong.
Removed gas cap first. Removed The housing. Drained the gas. Removed gas line. Took off the carburetor. Removed the bolt on the bottom of the bowl. Removed the float and the needle valve. Totally cleaned the carburetor. Put the new needle valve and float in, with the new o ring for the bowl. And a o ring for the bowl. Reinstalled carburetor and housing and the put fresh gas in the unit, put the gas cap on and started unit. Has been running perfectly, Since this was done.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Snowblower
Parts Used:
Carb Repair Kit - 119-1988
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Socket set
Leaking float bowl on carb
Removed shrouding. Removed 2 nuts holding carb in place. Removed carb a linkage. Removed float bowl. Used all gaskets, needle, float to rebuild. Put all back together. Worked perfect.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Snowblower
Parts Used:
Carb Repair Kit - 119-1988
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Socket set
not starting and fuel leak
removed carburetor and installed carb repair kit, reinstalled carburetor, tighten all bolts. snow blower working like new. took a little extra time because found threaded bolt from engine was loose. so make sure all bolts are tight before reinstalling carb kit.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Snowblower
Parts Used:
Carb Repair Kit - 119-1988
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Socket set, Wrench Set
bad gas,clean and rebuild carb.
remov ecarb from snowblower,slowly dis assemble,(noting where parts are at)clean carb w/break clean ,reassemble,add gas and start,readjust idle.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
1
Average Rating (out of 5):
1 Reviews
Click to filter by ratings:
5 stars
0
4 stars
0
3 stars
0
2 stars
0
1 stars
1
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Carb kit for Toro snow blower
    The parts looked correct but the float had small dimensional difference from the original that caused the float to stick and not work properly.
    Guest - December 27, 2021 Verified Purchase
    eReplacementParts Team
    Hi Stephen, Thank you for your review. Please accept our apologies for this situation. We will be in touch with you shortly regarding your order.
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: Toro
    Product Number: 119-1988
    Classification: Part
    Weight: 0.06 lbs.
    Shipping: Ships Worldwide

    Fixing things makes sense...

    ...And we make it easy! With our Fix app, you always have a personalized repair guide on-hand. Easily find manuals and replacement parts on your phone while you’re DIYing in the garage or garden.

    "Love the flexibility of the app to add everything in the home and garage. Access to manuals and parts right there makes it convenient."

    Available on the App Store Get it on Google Play
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal