This is a Genuine OEM replacement part used on Walk Behind/Push Mowers. This Cable Assembly consists of a Metal Wire Cable with Z-Type bent ends, Rubberized cover/body and a Plastic Clip. The Blade Control Cable is the cable that stops the blade when the control handle is released on Walk-Behind Mowers. If the cable is broken it will cause the brake to not release even when the lever is pressed.
You may need Pliers to complete this repair.
• First you want to see where the old cable is attached to the motor assembly.
• Just remove the cable end there and install the new one,
• Now you can run the new cable up to the control handle
• Then just as with the old cable, put the Z-shaped end through the hole in the control handle
• Once both ends are attached, just push the upper mount assembly of the old cable out of the hole in the upper handle
• Tie the cable in place just as the old one was, but leave enough clearance and free play to avoid over-bending and breaking the new cable
Engine Control Cable 532183567
OEM part for: Husqvarna, Poulan, Craftsman, Weed Eater, Jonsered
Part Number: 532183567
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.13 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 371 machines
Poulan
Husqvarna
Craftsman
Weed Eater
Jonsered
This item works with the following types of products:
- Lawn Mower Parts
- Snowblower Parts
- Lawn Tractor Parts
This part replaces obsolete part #: 182755, 5321827-55, 532182755, 60-109, 183567
Customer Part Reviews ?
- 1
- 2
- 3
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Engine Control Cable
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Broken throttle cable engagement tip
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Broken cable
Tool Type
Lawn Mower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Engine Zone Control Cable Stretched, would not allow mower to start
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Pliers, No tools needed
Parts Used
Correct part shipped, on time, reasonable price.
Cable broke
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Gas cable broken
Tool Type
Lawn Mower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Remove the cable tie and clamp from the handle
Remove the cable from the mower
Connect cable to the engine
Connect cable to the handle
Fasten cable to the handle
Cable was stiff
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Pliers
Parts Used
engine control cable and baffle was broke on one mower and two other mowers rear doors were broke
Tool Type
Lawn Mower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, Adjustable Wrench, none
The engine control cable had been pinched and the cable would not move within the sleeve
Tool Type
Lawn Mower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Heavy wire cutter to remove old cable easier
Parts Used
2 - Beginning at the engine, attached the engine end of the cable fitting to the engine "stopping mechanism".
3 - Routed the new cable up the mower handle the same way the old cable was routed.
4 - Attached the handle end of the cable to the actuator bar at the upper end of the mower handle.
5 - Snapped the cable fastener to the handle where the previous fastener was located.
6 - Test for proper operation
7 - Success!!
Cable broke
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Pliers
Parts Used
Engine zone repair cable
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Parts Used
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.