Product Information
Compatibility
the 27 compatible machines
This part is compatible with the following machines:
Electrolux
EIDW6105GB0 Dishwasher
EIDW6105GS0 Dishwasher
EIDW6105GW0 Dishwasher
EIDW6305GB0 Dishwasher
EIDW6305GS0 Dishwasher
EIDW6305GW0 Dishwasher
EWDW6505GB0 Dishwasher
EWDW6505GS0 Dishwasher
EWDW6505GW0 Dishwasher
EIDW6105GB1A Dishwasher
EIDW6105GS1A Dishwasher
EIDW6105GS0 Dishwasher
EIDW6105GW0 Dishwasher
EIDW6305GB0 Dishwasher
EIDW6305GS0 Dishwasher
EIDW6305GW0 Dishwasher
EWDW6505GB0 Dishwasher
EWDW6505GS0 Dishwasher
EWDW6505GW0 Dishwasher
EIDW6105GB1A Dishwasher
EIDW6105GS1A Dishwasher
EIDW6105GW1A Dishwasher
EIDW5905JB0A Electrolux/Dishwasher
EIDW5905JS0A Electrolux/Dishwasher
EIDW5905JW0A Electrolux/Dishwasher
EIDW6305GB1A Electrolux/Dishwasher
EIDW6305GS1A Electrolux/Dishwasher
EIDW6305GW1A Electrolux/Dishwasher
EWDW6505GB0B Electrolux/Dishwasher
EWDW6505GS0B Electrolux/Dishwasher
EWDW6505GW0B Electrolux/Dishwasher
EIDW5905JB0A Electrolux/Dishwasher
EIDW5905JS0A Electrolux/Dishwasher
EIDW5905JW0A Electrolux/Dishwasher
EIDW6305GB1A Electrolux/Dishwasher
EIDW6305GS1A Electrolux/Dishwasher
EIDW6305GW1A Electrolux/Dishwasher
EWDW6505GB0B Electrolux/Dishwasher
EWDW6505GS0B Electrolux/Dishwasher
EWDW6505GW0B Electrolux/Dishwasher
Frigidaire
Products Compatibility
This item works with the following types of products:
- • Dishwasher
Questions & Answers for Cable,hinge Pulley,(2)
Does this part include 2 cables? I want to replace both cables on my EIDW6105GS1 dishwasher.
Bruce
for model number 154658601
asked on 2024-01-11
Hello Bruce, Thank you for writing. The Cable is sold individually. We hope this helps!
eReplacementParts Team January 11, 2024
Repair Instructions: Submitted by Customers Like You
Tool Type:
Dishwasher
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
A cable on one side had broken and was not holding the door partially open.
To get to the cables and check the springs attached to the cables and door required pulling out the dishwasher. Pulling the dish washer out required removing screws on each side into the cabinets, and removing the dishwasher drain line from the garbage disposal to have slack in the line. Once the dishwasher was pulled out, it revealed one cable swaged end had broken and the spring was hanging in place. The replacement cable was attached to the door, then threaded through the two tension wheels and attached to the spring. I had bought springs I did not need and one cable for this Electrolux, model EIDW6305GB1. The dishwasher was slid back in place and reattached the drain line and two screws into the cabinets. Had I known how simple it was to pull out the dishwasher, I would have done that first to determine what parts were needed for the repair instead of guessing what was needed and buying unnecessary springs.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information