Medium
1-2 hours
This is an authentic OEM sourced burner tube set that is specially designed for use with Weber grills. It is an identical replacement for worn or missing components that were originally installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of these parts. To prevent rusting make sure you keep your burner tubes clean and grease free, this will help to ensure the longevity of new parts. Keep in mind this high-quality metal set is sold individually, note that it includes three tubes per set.
Burner Tube Set 62799
OEM part for: Weber
Part Number: 62799
$95.95
In Stock
Order within the next 4 hours and your part ships today! 
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 25 machines
Weber
6611001 Genesis 310 NG Grill View Diagrams & Manuals
6611301 Genesis 310 NG Grill View Diagrams & Manuals
6611701 Genesis 310 NG Grill View Diagrams & Manuals
6621001 Genesis 320 NG Grill View Diagrams & Manuals
6621301 Genesis 320 NG Grill View Diagrams & Manuals
6631001 Genesis 330 NG Grill View Diagrams & Manuals
6631301 Genesis 330 NG Grill View Diagrams & Manuals
6650001 Genesis 310 NG Grill View Diagrams & Manuals
6619099 Genesis E-310, Espresso, NG Gas Grill View Diagrams & Manuals
6670001 Genesis S-330, Stainless, NG Gas Grill View Diagrams & Manuals
86611701 (2013)(NG) Genesis CEP-310 Grill View Diagrams & Manuals
86611001 (2013)(NG) Genesis E-310 Grill View Diagrams & Manuals
86619099 (2013)(NG) Genesis E-310 Grill - Espresso Brown View Diagrams & Manuals
86611301 (2013)(NG) Genesis EP-310 Grill - Black View Diagrams & Manuals
86650001 (2013)(NG) Genesis S-310 Grill - SS View Diagrams & Manuals
86631301 (2013)(NG) Genesis EP-330 Grill - Black View Diagrams & Manuals
86670001 (2013)(NG) Genesis S-330 Grill - SS View Diagrams & Manuals
86621001 (2013) Genesis E-320 Ng Blk (Usa/Canada) View Diagrams & Manuals
86631001 (2013) Genesis E-330 Ng Blk (Usa/Canada) View Diagrams & Manuals
86631701 (2013) Genesis Cep-330 Ng Blk (Usa/Canada) View Diagrams & Manuals
56514 Grill View Diagrams & Manuals
6519009 Grill View Diagrams & Manuals
6532001 Genesis E-330 Lp View Diagrams & Manuals
6532301 (2013) Genesis Ep-330 Lp View Diagrams & Manuals
GENESIS E-300 Genesis E-300 View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
Repair Videos ?
Articles:
|
Having trouble getting your grill to light up? A common cause of this issue is a defective ignition switch. We'll sho...
November 08, 2012
|
Customer Part Reviews ?
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Burner Tube Set
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
old age- I needed to replace the innards
William - August 29, 2023
Tool Type
Outdoor Grill
Difficulty
Hard
Time
30-60 minutes
Tools Used
Socket set, Nutdriver, saw
The original burner tube set were impossible to remove with a socket set.
I had to saw them off.
Once that was done, I followed the instructions and it went well.
They were original equipment (9 years)...maybe that caused the issue?
Anyway, it might be good to note that a 5/16 socket may not loosen the bolt.
I had to saw them off.
Once that was done, I followed the instructions and it went well.
They were original equipment (9 years)...maybe that caused the issue?
Anyway, it might be good to note that a 5/16 socket may not loosen the bolt.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Flame too cool
Thomas - June 7, 2022
Tool Type
Outdoor Grill
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver
Removed fuel train knobs, and internal grill components grill sections, heat deflectors ( which were replaced), which provided access to the three fuel trains.
One screw and removal of the fuel rail and the igniters (which merely snap in) and you’re off.
Truthfully, you’ll spend more time cleaning the grill than making this repair
One screw and removal of the fuel rail and the igniters (which merely snap in) and you’re off.
Truthfully, you’ll spend more time cleaning the grill than making this repair
Did you find this story helpful?
Thanks for voting and helping fellow customers!
the burners where not working any longer
michael - March 11, 2019
Tool Type
Outdoor Grill
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, drill
Parts Used
I took the grill apart as per instruction and assembled.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Just needed to replace 7 yr old burner tubes
Richard - April 13, 2018
Tool Type
Outdoor Grill
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver
First completed major grill clean up, then following good instructions completed installation of new parts without a problem.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Old burner tubes corroded
Richard - November 15, 2017
Tool Type
Outdoor Grill
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Power Drill
Parts Used
1. Removed old grill tubes
2. Unsuccessfully tried to remove old burner tube hold down screws. Used wd40, torch and adjustable pliers to no avail.
3. Due to fear of breaking off old corroded screws, stopped and decided to grind old screws to accommodate placement of burner tubes slot end over screw post.
4. Reassembled grill & tested.
5. Weber grill works better than it has in a long time.
6. In hindsight, tubes should have been replaced over a year ago.
2. Unsuccessfully tried to remove old burner tube hold down screws. Used wd40, torch and adjustable pliers to no avail.
3. Due to fear of breaking off old corroded screws, stopped and decided to grind old screws to accommodate placement of burner tubes slot end over screw post.
4. Reassembled grill & tested.
5. Weber grill works better than it has in a long time.
6. In hindsight, tubes should have been replaced over a year ago.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
No ignition with starter and not cooking correctly.
Wallace - May 15, 2017
Tool Type
Outdoor Grill
Difficulty
Medium
Time
More than 2 hours
Tools Used
Screwdriver, Pliers, Nutdriver
Using instructions disassembled and replaced old parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
