866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Grill Parts  Weber Parts  20428 Burner Tube Kit

Burner Tube Kit

Part Number: 20428
Weber
Availability: 13 in stock
Price: $70.14
Quantity:
Order within the next 12 hours
and your part ships today!

*This part replaces obsolete part #: and 72605.

Specifications
  • Burners are 28-1/2 Inches in Length
Description:
This replacement burner tube set is supplied directly from original equipment manufacturer. It is commonly use on Weber grills. Burners are a key component of a gas grill because, it is where the flames would rise from. They are connected to control valves. This set includes three (3) stainless steel burner tubes, one (1) carry over tube and the hardware to secure the burners.

Replacing burners is a simple task that should only require a wrench.

• Make sure gas tank is disconnected
• Remove screws securing the old burners
• Disconnect old burners from control valves and replace them with a new burners
• Secure burners using the included hardware and
• Secure the carryover tube
• Connect the gas tank and test the burners
Product Information
Manufacturer: Weber
Product Number: 20428
Classification: Part
Weight: 3.55 lbs.
Shipping: Ships Worldwide
Repair Guides
Articles:
How to Replace the Ignitor Button on a Char-Broil Tru-Infrared Gas Grill
Having trouble getting your grill to light up? A common cause of this issue is a defective ignition switch. We'll sho...
November 08, 2012
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
4 of 4 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Porcelain Enamelled Replacement Cooking Grates - 7525
Burner Tube Kit - 20428
Igniter Kit - 900
Set Of Stainless Steel Replacement Flavorizer Bars - 7538
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Burner tubes rotted on my 2002 Weber grill
This repair took only 20 min. All instructions needed were supplied with the new parts. The one thing that did not need was the spider guards. The new replacement tubes have been re-designed to include the spider guard as part of the tubes. This grill now works good as new. It would have cost more than 3 times the parts price to replace with a new grill.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Set Of Porcelain Enamelled Replacement Flavorizer Bars - 9813
Bottom Tray - Black Porcelain - 40968012
Catch Pan Holder - 99253
Burner Tube Kit - 20428
Durawood Accessory Tray - 3624
Durawood Work Table With Spacer Bracket - 3627
Catch Pan Kit - 93305
Hose and regulator - 65570
Repair Difficulty:
Medium
Time Spent Repairing:
More than 2 hours
Tools Used:
Screwdriver, Pliers, Power Drill, Socket set, Wrench Set
More than a repair
I have a twenty year old Weber grill that has never been inside. It was in need of attention. Over the years all that I done to it was replace a crossover tube and the flavorizer bars. I thought about replacing it with either a new Weber or another cheaper grill. First, understand I love my Weber!! I decided that a cheaper grill just wouldn't do. I decided that I wouldn't purchase a new Weber, rather rebuild the one I had.
I stripped it down, cleaned it well, power washed it, repainted the black areas with high heat and satin paint. The last step was to install all new parts, tables burners, etc. I got to keep a grill I know well and love for less than the cost of a new Weber AND less than the cost of a cheaper grill.I doubt that this is possible with many other appliances.Did I say that I love my Weber? You will too. Thank you Weber for a great product and thank you eReplacementParts for having everything I needed.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Bottom Tray - Black Porcelain - 40968012
Catch Pan Holder - 99253
Burner Tube Kit - 20428
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver
Lower tray was rusted through. Burners were old and inefficient. Grill is 18 years old
Replace lower tray and drip pan housing. Replaced burners after taking off starter knobs, housing, and gas manifolds. replaced burners following instructions. the reverse order to finish. Even though it is a fairly simple project read entire directions before starting.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Burner Tube Kit - 20428
Igniter Kit - 900
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Socket set, Wrench Set
Inconsistent starting of Gas grill
1-Remove cooking grates and flavorizer bars
2-Remove control knobs and panel
3-Remove manifold assembly
4-Remove burner assembly
5-Iinstall burner tubes
and igniter kit
6-Reinstall manifold and valve assembly, panel and control knobs
7-Turn on gas and check for leaks
8- Reinstall flavorizer bars and cooking grates
Note: The burner kit and ignitor kit include installation instructions.

Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Parts Used:
Burner Tube Kit - 20428
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Socket set, Nutdriver, Adjustable Wrench
Nothing
Removed grill grates
Removed flavorizer bars
Unhooked propane tank
Removed two bolts securing 3 propane valves.
Removed burners while noting orientation
Installed new burners
Reinstalled bolts and 3 valve assembly.
Reinstalled grates/bars and propane tank
Verified proper operation.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Parts Used:
Warm-Up Basket - 80632
Burner Tube Kit - 20428
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver
Gas distribution pipes corroded
Removed old pipes. Problem was caused by the grill being connected to natural gas. Hard time figuring out how to turn off gas. New pipes installed easily.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Parts Used:
Rocker Switch - 92510
Control Knob - 78960
Control Panel - 10360
Burner Tube Kit - 20428
Igniter Kit - 900
Stainless steel flavorizer bar - 9913
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Weber Genesis Gold was looking a little weak.
Followed the directions included with the parts
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Parts Used:
Set Of Porcelain Enamelled Replacement Flavorizer Bars - 9813
Burner Tube Kit - 20428
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
, none
Burners and bars finally wore out after 20+ years
To install the burners I followed the instructions that came with them. Then all you have to do is remove the old flavorizer bars and place the new ones in.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Parts Used:
Burner Tube Kit - 20428
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Wrench Set
Replaced burners
I was pleased to see that the kit came with installation instructions. I followed them and the grill is as good as new now.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Parts Used:
Set Of Porcelain Enamelled Replacement Flavorizer Bars - 9813
Burner Tube Kit - 20428
Igniter Kit - 900
Hose and regulator - 65570
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Wrench Set
10 years old parts needed replacing.
Follow printed instructions with parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Burner Tube Kit - ( 20428 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
Question: Material

mattgigl

Are the burner tubes 100% stainless steel?
WJA
Reply: Material

WJA

Hello mattgigl.

The Weber part number 20428 Burner Tube Kit, is made of stainless steel.

-WJA
Question: Orifice

1397906

Does this part include orifice

If not what part does?
Question: Burner Tube Lengths

csi8027

What is the length of the burner tubes?
WJA
Reply: Burner Tube Lengths

WJA

Hello csi8027,

The Weber 20428 Burners are 28-1/2 inches in length.

-WJA
visa mastercard discover american express PayPal
HACKER SAFE certified sites prevent over 99.9% of hacker crime.

fancyboxy