eReplacementParts.com
877-346-4815
Dyson Parts
Repair Parts Home  Vacuum Parts  Dyson Parts  DY-92023401 Brushbar Assy

Install
Videos!
Brushbar Assy - DY-92023401:Dyson 360 View
Brushbar Assy - DY-92023401:DysonBrushbar Assy - DY-92023401:DysonBrushbar Assy - DY-92023401:DysonBrushbar Assy - DY-92023401:DysonBrushbar Assy - DY-92023401:DysonBrushbar Assy - DY-92023401:Dyson 360 View

Brushbar Assy DY-92023401

Part Number: DY-92023401
Dyson
Availability: In Stock
Price: $29.86
Order within the next 16 minutes
and your part ships today!

*This part replaces obsolete part #: 904174-01, DY-90417401 and 920234-01.

Product Information
Description:
This is an authentic OEM sourced part which is specifically designed for use with a Dyson upright vacuum. The brushbar rotates and picks up material from the floor, over time the bristles will wear out eventually requiring replacement. Keep in mind this part is made of high-quality plastic material and is sold as an individual replacement part.
Frequently Purchased With
Compatibility

This part is compatible with the following machines:

Dyson
Expand the 53 compatible machines
Products Compatibility

This item works with the following types of products:

  • • Vacuum

Questions & Answers for Brushbar Assy


No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
4 of 5 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Clutch Belt - DY-90251401
Brushbar Assy - DY-92023401
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers
Vacuum didn't pick up well. Brushbar was a little worn
It took more time to figure out how to disassemble the vacuum than to repair and reassemble it. I used the handles of a pair of pliers to stretch the belt enough to install the brush bar. It works as well as a new one now. Apparently, the clutch belt stretches out over time ( this one is about 7 years old) and causes the brush bar not to work well.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Brushbar Assy - DY-92023401
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
, Quarter and butter knife
Beater bar brushes worn down
Removed bottom cover
Ended up going on YouTube to get instructions
Replaced bar and put cover back on
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Brushbar Assy - DY-92023401
Repair Difficulty:
Medium
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Nutdriver, Torx bits
Brush bar bearings were packed with hair & crud & seized
1-Remove sole plate with coin
2-Remove old brush bar-belt is hard to stretch.
3-Stretch belt with screwdriver & slip new brush bar into belt.
4-Seat brush bar into place & replace soleplate
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Brushbar Assy - DY-92023401
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Beater lost bristles had to replace
Remove sole plate, removed the belt and old beater. Installed the new beater and belt, then replaced sole plate. Vacuum works great.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Brushbar Assy - DY-92023401
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, A very big and additional medium sized as well
Beater bars a little worn
Replaced “beater bar” on Dyson 33 vacuum

1 remove canister and main filter and leave filter assembly open (it has a hinge) 180 degrees. This makes it a neatly flat surface so you can turn the whole thing upside down and rest it on a counter or table work surface with upright portion hanging down.

Use coin or large screwdriver to turn three large fasteners a quarter turn so you can remove plate on bottom of machine. It pops up easily and then you easily hit carefully work it off.

The next to hardest part is the removing the beater bar. Pull both ends straight up. It’s hard because you really need to stretch the rubber belt with the screwdrivers.

Then do everything in reverse and make sure belt is not twisted. Putting in the new bar is hardest part but not that hard. It’s difficult because of the belt that needs to be stretched. It’s easy to replace the belt too, but takes a while and you will need torx screwdriver.

I recommend replacing both filters and cleaning canister. There is a single elongated oval about 3/4 inch push in catch that holds the top part to the bottom part of the canister

Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Brushbar Assy - DY-92023401
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Bristles were worn
Stretched the pulley slide the new brush assembly into the pulley and into the vacuum
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Brushbar Assy - DY-92023401
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Brushbar assembly was cracked.
Used a screwdriver, gently pulled out the belt and slipped the bar assembly underneath and into the place. Take time not to cut the belt. Screwed to finish the plate into the place.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
5
Average Rating (out of 5):
2 Reviews
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • The right part
    I always get the right parts, I'm a frequent buyer of this company and have their web address bookmarked
    Guest - November 4, 2020 Verified Purchase
    Easy repair
    Was able to restore the cleaning performance of the vac with the new brush
    Thomas - May 29, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal