Install
Videos!

Watch The
Repair Video

Brush Set 1617014126

Part Number: 1617014126

3 Reviews

Order within the next 3 hours
and your part ships today!

Questions & Answers

Repair Instructions

Product Information

Description:

Genuine Bosch replacement part, these are sold in a set of two.

• Worn brushes are often the cause of a poorly running motor
• Replacing brushes can fix an intermittent motor
• New brushes can restore a motor’s electric braking

Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

Warning: California's Proposition 65

Frequently Purchased With

Power Cord
$18.16

Cord Protector..
$4.99

Shift Plate
$9.60

Speed Control..
$71.70

Switch
$18.16

Cheese Head Sc..
$4.99

Carbon Brush S..
$8.35

Auxiliary Hand..
$38.91

Compatibility

This part is compatible with the following machines:

Bosch

11223EVS (0611223739) Rotary Hammer
11245EVS (0611245739) Rotary Hammer
11311EVS (0611311739) Demolition Hammer
11316EVS (0611316739) Demolition Hammer

11317EVS (0611317739) Demolition Hammer
11 316 (0611316739) Demolition Hammer
11316EVS (3611C16810) Demolition Hammer 11316evs

Expand the 7 compatible machines

Products Compatibility

This item works with the following types of products:

• Demolition Hammer
• Rotary Hammer

Questions & Answers for Brush Set

Sort by

Are these brushes compatible with Bosch RH540M? And, if so, how many do I need? Thank you

Steve for model number RH540M asked on 2022-12-10

Hi Steve, Thank you for your question. These would not be the correct brushes for your rotary hammer. The part number listed under your model number for the brush set is 1617014138. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!

Related Parts: Carbon Brush Set

Repair Instructions: Submitted by Customers Like You

6 of 8 people found this instruction helpful

Tool Type:

Demolition Hammer

Parts Used:

Power Cord - 1604460092

Brush Set - 1617014126

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Metric large Allen wrench 10 mm I believe.

Not running.

Always check cord and brushes first. in 5 of the last tools I repaired brushes were needed. The cord was broken at the strain relief. To replace the brushes I removed the motor housing, which exposed the brushes. Pull the springs back and rested them on the brush holder. Disconnected the old brushes and installed the new ones. For the cord. I removed the handle then unscrewed the cord clamp.Removed the cord leads from the switch, removed the cord relief, slid the cord relief on the new cord, then connected the cord leads to the switch.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

2 of 2 people found this instruction helpful

Tool Type:

Demolition Hammer

Parts Used:

Cheese Head Screw - 2914551114

Brush Set - 1617014126

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, allen set

Brushes worn badly and screws missing from vibration

To get at the brushes on a Bosch chipping gun, remove the screws that hold the trigger handle (two are under the switch plate just pop it off with a screwdriver) slid out the brush covers, using a dental tool pull the spring up away from the brush and pull the brush out, replace with new brush, pull off the wire connector and replace with new. slide covers back in and put handle cover back on. Pop the switch plate back on, may have to move it back and forth a little to get back in position.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Demolition Hammer

Parts Used:

Brush Set - 1617014126

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Pliers

Service light came on

Pulled off cover that mounted the armature of the motor. Pulled the removable electrical clips off of that assembly. Massaged the part that holds the brushes to clear the armature and the housing. I did not separate them which would have required a puller. I was able to carefully replace each of the brushes with the new ones. Reassembled with gear grease on the gears on the other end of the motor. Tested, and it is back in service with the service light extinguished.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Demolition Hammer

Parts Used:

Brush Set - 1617014126

Chuck Cover - 450894-7

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Power Drill

Brush, Chuck cover

Replaced the old with the new.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

3 Reviews

Click to filter by ratings:

5 stars

4 stars

3 stars

2 stars

1 stars

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

GREAT

Guest - October 24, 2022 Verified Purchase

Good quality

The parts I ordered are the correct items

Guest - November 15, 2019 Verified Purchase

Work as expected

Arrived quickly, great condition

Guest - June 24, 2019 Verified Purchase

Verified Purchase

eReplacementParts Team

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

Product Information