866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Vacuum Parts  Oreck Parts  O-016-1152 Brush Roller

Brush Roller

Part Number: O-016-1152
Oreck
Availability: 18 in stock
Price: $35.43
Quantity:
Ships within 1 business day

*This part replaces obsolete part #: 75104-02, 75930-03, 75202-01N, 75202-01 and 75202-03.

Description:
This Original OEM Wood Brushroll Assembly Includes: wood brushroll, red bristles, ball bearings, metal pulley, firm-fitting removable end caps. To keep your Oreck vacuum cleaner working at peak performance it is recommended to replace the Brushroll once a year.
Product Information
Manufacturer: Oreck
Product Number: O-016-1152
Classification: Part
Weight: 0.44 lbs.
Shipping: Ships Worldwide
Related Products
Compatibility

This part is compatible with the following machines:

Oreck

Products Compatibility

This item works with the following types of products:

  • • Vacuum
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
3 of 4 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Brush Roller - O-016-1152
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Beater bar brushes were worn.
1. Removed 5 screws in the base of the vacuum and removed the base.
2. Removed the belt.
3. Removed the existing beater bar, making note of the orientation of the install.
4. Replaced the beater bar.
5. Replaced the belt. Be careful. I had the belt misaligned on the motor and ended up having to replace the belt.
6. Replaced the base and 5 screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Brush Roller - O-016-1152
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
roller old and needed replaced
removed screws from bottom
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Brush Roller - O-016-1152
Repair Difficulty:
Medium
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Brushing vacuum wasn't picking up as well as it could. Worn down bristles
On the Oreck vacuum cleaner you have to unscrew 4 screws to take the bottom of plate off to reveal the brush and belt locations. Then the belt has to be taken off plus the damaged brush to put in a new one. Replacing the brush wasn't difficult, just line up the ends properly but getting the belt back on is very difficult because it is extremely tight. A woman would find this very hard to do because it has to be stretched to some degree and requires a lot of strength to do this.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Vacuum Drive Belt - O-010-0604
Brush Roller - O-016-1152
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Vacuum wasn't picking up debris consistently.
Removed screws on bottom cover to access brush roller and belt. Easily removed brush roller and drive belt assembly and replaced both with new parts. Followed directions from users manual to proper direction of brush roller.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Edge Brush, Silver ION - O-015-0456
Brush Roller - O-016-1152
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Needed brushes replaced
Took the bottom cover off, snap the old brushes off, then snapped the new ones in.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 2 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Brush Roller - O-016-1152
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Vacuum was very hard to push
Took off bottom of vacuum head. Removed old roller. Replaced with new one. Replaced bottom of vacuum head.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Soft Rear Wheel, Black - OR-7100
Vacuum Drive Belt - O-010-0604
Brush Roller - O-016-1152
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
My wheels were totally worn out! They wobbled wiggled making it hard to speed around corners.
1. Removed the bottom plate by removing the 6 Phillips screws.
2. Used a screwdriver to remove the small metal axle by prying it out of the slot. Used the old axle in the new wheels and popped it back in place.
3. Removed the old belt by sliding the brush roller out of the slots. Install the new belt and slide the roller into place.
4. Replace bottom panel with the screws.
5. Turned that baby on and I was cruising the floor looking for stuff!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Brush Roller - O-016-1152
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Bristles on bar were worn or missing.
Removed the bottom plate then the old bar. Replaced the new bar and replaced the
retainer plate.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Brush Roller - O-016-1152
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Roller brush wore out.
1. Remove 5 phillips screws from bottom.
2. Remove bottom.
3. Remove old roller while removing belt.
4. Install new roller and belt.
5. Replace screws in bottom.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Brush Roller - ( O-016-1152 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
Reviews
4.3
Average Rating (out of 5):
3 Reviews
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
1
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Easy Repair - Great Price - Lightning Fast Shipping!
    We ordered a brush roller for our Oreck XL. Installation was simple and our vacuum now purrs like a kitten and works like it's BRAND NEW!! We're thrilled!!
    Guest - May 6, 2019 Verified Purchase
    Easy fix.
    Part arrived in perfect condition and it took less than 10 minutes for my husband to install it. I'm assuming it will hold up well, as it appears to be identical to the original.
    Guest - May 3, 2019 Verified Purchase
    Roller brush and belts.
    Parts fit great. Vacuum works great again. The problem I have is that I ordered May 18, 2019 and didnt receive my paid for order until June 08, 2019. When the item clearly shows in stock, it should shipped out within 2 or 3 days. Not weeks later. I have purchased from e-replacement before and do not recall having to wait that long. Please streamline or I will buy elsewhere.
    Guest - 10 days ago Verified Purchase
    eReplacementParts Team
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    visa mastercard discover american express PayPal
    HACKER SAFE certified sites prevent over 99.9% of hacker crime.

    fancyboxy